An official website of the United States government
Crowdyet al.(2023Phys. Rev. Fluids, vol. 8, 094201), recently showed that liquid suspended in the Cassie state over an asymmetrically spaced periodic array of alternating cold and hot ridges such that the menisci spanning the ridges are of unequal length will be pumped in the direction of the thermocapillary stress along the longer menisci. Their solution, applicable in the Stokes flow limit for a vanishingly small thermal Péclet number, provides the steady-state temperature and velocity fields in a semi-infinite domain above the superhydrophobic surface, including the uniform far-field velocity, i.e. pumping speed, the key engineering parameter. Here, a related problem in a finite domain is considered where, opposing the superhydrophobic surface, a flow of liquid through a microchannel is bounded by a horizontally mobile smooth wall of finite mass subjected to an external load. A key assumption underlying the analysis is that, on a unit area basis, the mass of the liquid is small compared with that of the wall. Thus, as shown, rather than the heat equation and the transient Stokes equations governing the temperature and flow fields, respectively, they are quasi-steady and, as a result, governed by the Laplace and Stokes equations, respectively. Under the further assumption that the ridge period is small compared with the height of the microchannel, these equations are resolved using matched asymptotic expansions which yield solutions with exponentially small asymptotic errors. Consequently, the transient problem of determining the velocity of the smooth wall is reduced to an ordinary differential equation. This approach is used to provide a theoretical demonstration of the conversion of thermal energy to mechanical work via the thermocapillary stresses along the menisci.
more »
« less
Asymmetric thermocapillarity-based pump: Concept and exactly solved model
A mechanism for a microfluidic pump that leverages alternating adverse and favorable thermocapillary stresses along menisci in a (periodically) fully developed transverse flow in a microchannel is exemplified. The transverse ridges are the interdigitated teeth of cold and hot (isothermal) “combs” and free surface menisci span the interstitial regions between them. The teeth are asymmetrically positioned so that the widths of adjacent menisci differ. This architecture is essentially that of the theoretical pump proposed by Adjari [Phys. Rev. E 61, R45(R) (2000)] but exploits thermocapillarity rather than electro-osmotic slip to drive unidirectional pumping. A theoretical model of the multiphysics pumping mechanism is given that is solved in closed form. Two explicit formulas for the pumping speed are provided. One is derived from the exact solution to the full problem; the other follows from the reciprocal theorem for Stokes flow combined with an exact solution to a distinct problem resolving apparent slip over superhydrophobic surfaces [D. G. Crowdy, Phys. Fluids 23, 072001 (2011)]. A conceptual design of the pump is also outlined; this involves no moving parts, requires no external driving pressure, and pumps a continuous stream of liquid through a microchannel, as opposed to a series of discrete droplets. Since there is only a periodic component of the pressure field the microchannel could be made arbitrarily long and the menisci, which would be essentially flat, are more robust than for conventional pressure-driven flow.
more »
« less
- Award ID(s):
- 2140033
- PAR ID:
- 10529064
- Editor(s):
- Lauga, Eric; McKeon, Beverly
- Publisher / Repository:
- American Physical Society
- Date Published:
- Journal Name:
- Physical Review Fluids
- Edition / Version:
- 1
- Volume:
- 8
- Issue:
- 9
- ISSN:
- 2469-990X
- Page Range / eLocation ID:
- 1-21
- Subject(s) / Keyword(s):
- na
- Format(s):
- Medium: X Size: 1MB Other: pdf
- Size(s):
- 1MB
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
Abstract We derive a class of exact solutions for Stokes flow in infinite and semi‐infinite channel geometries with permeable walls. These simple, explicit, series expressions for both pressure and Stokes flow are valid for all permeability values. At the channel walls, we impose a no‐slip condition for the tangential fluid velocity and a condition based on Darcy's law for the normal fluid velocity. Fluid flow across the channel boundaries is driven by the pressure drop between the channel interior and exterior; we assume the exterior pressure to be constant. We show how the ground state is an exact solution in the infinite channel case. For the semi‐infinite channel domain, the ground‐state solutions approximate well the full exact solution in the bulk and we derive a method to improve their accuracy at the transverse wall. This study is motivated by the need to quantitatively understand the detailed fluid dynamics applicable in a variety of engineering applications including membrane‐based water purification, heat and mass transfer, and fuel cells.more » « less
-
null (Ed.)We study hydrodynamics, heat transfer, and entropy generation in pressure-driven microchannel flow of a power-law fluid. Specifically, we address the effect of asymmetry in the slip boundary condition at the channel walls. Constant, uniform but unequal heat fluxes are imposed at the walls in this thermally developed flow. The effect of asymmetric slip on the velocity profile, on the wall shear stress, on the temperature distribution, on the Bejan number profiles, and on the average entropy generation and the Nusselt number are established through the numerical evaluation of exact analytical expressions derived. Specifically, due to asymmetric slip, the fluid momentum flux and thermal energy flux are enhanced along the wall with larger slip, which, in turn, shifts the location of the velocity's maximum to an off-center location closer to the said wall. Asymmetric slip is also shown to redistribute the peaks and plateaus of the Bejan number profile across the microchannel, showing a sharp transition between entropy generation due to heat transfer and due to fluid flow at an off-center-line location. In the presence of asymmetric slip, the difference in the imposed heat fluxes leads to starkly different Bejan number profiles depending on which wall is hotter, and whether the fluid is shear-thinning or shear-thickening. Overall, slip is shown to promote uniformity in both the velocity field and the temperature field, thereby reducing irreversibility in this flow.more » « less
-
We use magnetohydrodynamic levitation as a means to create a soft, elastomeric, solenoid-driven pump (ESP). We present a theoretical framework and fabrication of a pump designed to address the unique challenges of soft robotics, maintaining pumping performance under deformation. Using a permanent magnet as a piston and ferrofluid as a liquid seal, we model and construct a deformable displacement pump. The magnet is driven back and forth along the length of a flexible core tube by a series of solenoids made of thin conductive wire. The magnet piston is kept concentric within the tube by Maxwell stresses within the ferrofluid and magnetohydrodynamic levitation, as viscous lift pressure is created due to its forward velocity. The centering of the magnet reduces shear stresses during pumping and improves efficiency. We provide a predictive model and capture the transient nonlinear dynamics of the magnet during operation, leading to a parametric performance curve characterizing the ESP, enabling goal-driven design. In our experimental validation, we report a shut-off pressure of 2 to 8 kPa and run-out flow rate of 50 to 320 mL⋅min −1 , while subject to deformation of its own length scale, drawing a total of 0.17 W. This performance leads to the highest reported duty point (i.e., pressure and flow rate provided under load) for a pump that operates under deformation of its own length scale. We then integrate the pump into an elastomeric chassis and squeeze it through a tortuous pathway while providing continuous fluid pressure and flow rate; the vehicle then emerges at the other end and propels itself swimming.more » « less
-
It is well known that drag created by turbulent flow over a surface can be reduced by oscillating the surface in the direction transverse to the mean flow. Efforts to understand the mechanism by which this occurs often apply the solution for laminar flow in the infinite half-space over a planar, oscillating wall (Stokes’ second problem) through the viscous and buffer layer of the streamwise turbulent flow. This approach is used for flows having planar surfaces, such as channel flow, and flows over curved surfaces, such as the interior of round pipes. However, surface curvature introduces an additional effect that can be significant, especially when the viscous region is not small compared to the pipe radius. The exact solutions for flow over transversely oscillating walls in a laminar pipe and planar channel flow are compared to the solution of Stokes’ second problem to determine the effects of wall curvature and/or finite domain size. It is shown that a single non-dimensional parameter, the Womersley number, can be used to scale these effects and that both effects become small at a Womersley number of greater than about 6.51, which is the Womersley number based on the thickness of the Stokes’ layer of the classical solution.more » « less
- Free Publicly Accessible Full Text
-
Accepted Manuscript1.0
- Journal Article:
- https://doi.org/10.1103/PhysRevFluids.8.094201
