An official website of the United States government
The design of organic light emitting diode (OLED) materials with the potential for exhibiting thermally-activated delayed fluorescence (TADF) is reported. Using computational methods (DFT/TD-DFT) as a guiding tool, six materials with a benzobisoxazole (BBO) core and donor–acceptor–donor architectures were designed by changing the conjugation position of carbazole-substituted phenyl substituents and the type of BBO isomer ( cis - vs. trans -). Experimental steady-state and transient absorption spectroscopic techniques were utilized to probe the TADF activity of these molecules. Each material was then used in host–guest OLED devices as either near-UV dopants or host with low singlet-triplet energy differences. The electroluminescent properties show that when used as dopants these materials provide near-UV emission (CIE y < 0.06 and CIE x = 0.16), whereas when used as hosts, these materials show reduced operating voltages and increased performance efficiencies when compared to commercial materials.
more »
« less
Evaluating the Effect of Extended Conjugation and Regioisomerism on the Optoelectronic Properties and Device Efficiencies of Blue Light-Emitting Benzobisoxazoles
Four new blue light-emitting materials based on benzo[1,2-d:4,5-d′]bisoxazole (BBO) have been synthesized, characterized, and fabricated into organic light-emitting diode (OLED) devices. Using a combination of theoretical and experimental methods, we investigated the effect of conjugation by comparing bulky alkyl groups and planar aromatic groups along the 2,6-axis. Two of these molecules, PB2Cz and PB3Cz, are cross-conjugated cruciform-type BBOs with phenyl and carbazole groups along the 2,6 and 4,8 axes, respectively. The other two molecules, AB2Cz and AB3Cz, have extended conjugation via the carbazole groups along the 4,8-axis and bulky adamantyl groups along the 2,6-axis. Concurrently, we explored the effect of regioisomerism on optoelectronic and device properties arising from attaching carbazole at the 2- (2Cz) or 3- (3Cz) position along the 4,8-axis. The materials’ geometric and electronic properties were predicted using time-dependent density functional theory (TD-DFT) calculations at the mPW3PBE/SV level. The molecules’ photoluminescent properties were measured in solution and film states. The BBO molecules were used as dopants in mixed host/guest OLED devices, producing teal to deep blue emission. Specifically, the AB2Cz and AB3Cz, with adamantyl on the 2,6-axis, exhibit blue to deep-blue emissions of 414–422 nm (CIEx < 0.20, CIEy < 0.10). In comparison, PB2Cz and PB3Cz have slightly longer emission wavelengths of 472–476 nm (CIEx < 0.16, CIEy < 0.28) and high brightness of 2700–3500 cdm–2. The BBOs with 2Cz resulted in more efficient devices with EQEs of ∼2.8–3.2%, while the 3Cz BBOs had EQEs of ∼1.1–1.5%. This work provides insight into designing efficient, purely organic blue-fluorescent OLED materials based on the BBO moiety.
more »
« less
- Award ID(s):
- 2108810
- PAR ID:
- 10529843
- Publisher / Repository:
- American Chemical Society
- Date Published:
- Journal Name:
- Chemistry of Materials
- Volume:
- 36
- Issue:
- 10
- ISSN:
- 0897-4756
- Page Range / eLocation ID:
- 4945 to 4954
- Subject(s) / Keyword(s):
- Aromatic compounds, molecules, materials, diodes.
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
Abstract Four cross‐conjugated molecules based on the benzo[1,2‐d:4,5‐d’]bisoxazole (BBO) moiety have been synthesized from a common synthon. Theoretical studies indicated that these cruciforms had highly segregated HOMO and LUMO levels enabling semi‐autonomous tuning of the LUMO level from the HOMO through substitution along the 2,6‐axis. The experimental data confirms that the HOMO levels within these systems varied by 0.3 eV, whereas the LUMO levels varied by over 1.6 eV when the electron‐density along the 2,6‐axis was increased. The introduction of relatively electron‐deficient moieties along the 2,6‐axis resulted in a bathochromic shift in the absorption profiles concurrent with the stabilization of the LUMO. These substituents also prolonged the photoluminescent lifetimes owing to improved intramolecular charge transfer states between the 4,8‐ and 2,6‐ axis. The BBO cruciforms were evaluated as donor materials in organic solar cells (OSC)s, but the energy‐level mismatches and poor thin film morphology led to poor performance. These results indicate that benzobisoxazole cruciforms are a promising platform for the development of tunable materials for use in organic semiconductors, but improvements in the optical, electronic and film‐forming properties are needed to enable their use in efficient OSCs.more » « less
-
In an effort to design deep-blue light emitting materials for use in OLEDs, the optical and electronic properties of a series of tetraarylbenzobis[1,2- d :4,5- d ′]oxazole (BBO) cruciforms were evaluated using density functional theory (DFT) and time-dependent DFT (TD-DFT). Of the nine possible combinations of phenyl-, furan-2-yl-, and thiophen-2-yl-substituted BBO cruciforms, five were predicted to have ideal optical and electronic properties for use in blue-light emitting diodes. These five cruciforms were synthesized and then characterized electrochemically and spectroscopically. Additionally, they were solution-processed into functional organic light-emitting diodes (OLED). Several of the OLEDs exhibited deep-blue EL ( λ EL < 452 nm; CIE y ≤ 0.12) with maximum luminance efficacies reaching 0.39 lm W −1 and maximum current efficiencies of 0.59 cd A −1 . A comparison of identical device architectures showed that heterocycles such as furan and thiophene helped improve device efficiencies with only a minor red-shift of the electroluminescence (EL). Although these BBO cruciforms produced the desired deep-blue emission their modest performance in host–guest OLEDs demonstrates the incorporation of heterocycles onto the BBO cruciform motif is detrimental to the fluroescence quantum yield. These results add to the knowledge base on structure–property relationships that will inform the design of better blue emitting materials.more » « less
-
Molecular dyes containing carbazole-based π bridges and/or julolidine-based donors should be promising molecules for intense SWIR emission with potential application to molecular bioimaging. This study stochastically analyzes the combinations of more than 250 organic dyes constructed within the D-π-D (or equivalently D-B-D) motif. These dyes are built from 22 donors (D) and 14 π bridges (B) and are computationally examined using density functional theory (DFT). The DFT computations provide optimized geometries from which the excited state transition wavelengths and associated oscillator strengths and orbital overlaps are computed. While absorption is used as a stand-in for emission, the longer the absorption wavelength, the longer the emission should be as well for molecules of this type. Nearly 100 novel dyes reported in this work have electronic absorptions at or beyond 1200 nm, opening the possibility for future synthesis and experimental characterization of new molecular dyes with promising properties for bioimaging.more » « less
-
Abstract Acenes are attractive as building blocks for low gap organic materials with applications, for example, in organic light emitting diodes, solar cells, bioimaging and diagnostics. Previously, we have shown that modification of dipyridylanthracene via B–N Lewis pair fusion (BDPA) strongly redshifts the emission, while facilitating self‐sensitized reactivity toward O2to reversibly generate the corresponding endoperoxides. Herein, we report on the further expansion of the π‐system of BDPA to a vinyl‐substituted monomer, vinylene‐bridged dimer, and a polymer with an average of 20 chromophores. The extension of π‐conjugation results in largely reduced band gaps of 1.8 eV for the dimer and 1.7 eV for the polymer, the latter giving rise to NIR emission with a maximum at 731 nm and an appreciable quantum yield of 7 %. Electrochemical and computational studies reveal efficient delocalization of the lowest unoccupied molecular orbital (LUMO) along the pyridyl‐anthracene‐pyridyl axis, which results in effective electronic communication between BDPA units, selectively lowers the LUMO, and ultimately narrows the band gap. Time‐resolved emission and transient absorption (TA) measurements offer insights into the pertinent photophysical processes. Extension of π‐conjugation also slows down the self‐sensitized formation of endoperoxides, while significantly accelerating the thermal release of singlet oxygen to regenerate the parent acenes.more » « less
- Free Publicly Accessible Full Text
-
Accepted Manuscript1.0
- Journal Article:
- https://doi.org/10.1021/acs.chemmater.3c02109
