skip to main content
US FlagAn official website of the United States government
dot gov icon
Official websites use .gov
A .gov website belongs to an official government organization in the United States.
https lock icon
Secure .gov websites use HTTPS
A lock ( lock ) or https:// means you've safely connected to the .gov website. Share sensitive information only on official, secure websites.

Explore Research Products in the PAR
It may take a few hours for recently added research products to appear in PAR search results.


Title: Temperature and bias voltage dependences of magnetic tunnel junction with FeAlSi electrode
We fabricated magnetic tunnel junctions (MTJs) with FeAlSi free layers and investigated the tunnel magnetoresistance (TMR) properties. We found that the temperature and bias voltage dependences of the TMR effect in FeAlSi-MTJs were almost the same as MTJs with Fe free layers despite the low Curie temperature of FeAlSi. In the inelastic electron tunneling spectroscopy measured at low temperatures, the relatively large cutoff energy of magnon excitation at the FeAlSi and MgO interface was confirmed. In addition, we studied for the first time the exchange stiffness constant of FeAlSi films by Brillouin light scattering. The determined value of the stiffness constant of FeAlSi was 14.3 (pJ/m), which was similar to that of Fe. Both the large magnon cutoff at the interface and the stiffness constant of FeAlSi are considered to be the reason for the good temperature and voltage dependences of FeAlSi-MTJs.  more » « less
Award ID(s):
2218550
PAR ID:
10530557
Author(s) / Creator(s):
; ; ; ; ; ;
Publisher / Repository:
America Institute of Physics
Date Published:
Journal Name:
APL Materials
Volume:
12
Issue:
2
ISSN:
2166-532X
Format(s):
Medium: X
Sponsoring Org:
National Science Foundation
More Like this
  1. ; ; ; (, Scientific Reports)
    Abstract Magnetic tunnel junctions (MTJs) in the field of spintronics have received enormous attention owing to their fascinating spin phenomena for fundamental physics and potential applications. MTJs exhibit a large tunnel magnetoresistance (TMR) at room temperature. However, TMR depends strongly on the bias voltage, which reduces the magnitude of TMR. On the other hand, tunnel magnetocapacitance (TMC), which has also been observed in MTJs, can be increased when subjecting to a biasing voltage, thus exhibiting one of the most interesting spin phenomena. Here we report a large voltage-induced TMC beyond 330% in MgO-based MTJs, which is the largest value ever reported for MTJs. The voltage dependence and frequency characteristics of TMC can be explained by the newly proposed Debye-Fröhlich model using Zhang-sigmoid theory, parabolic barrier approximation, and spin-dependent drift diffusion model. Moreover, we predict that the voltage-induced TMC ratio could reach over 3000% in MTJs. It is a reality now that MTJs can be used as capacitors that are small in size, broadly ranged in frequencies and controllable by a voltage. Our theoretical and experimental findings provide a deeper understanding on the exact mechanism of voltage-induced AC spin transports in spintronic devices. Our research may open new avenues to the development of spintronics applications, such as highly sensitive magnetic sensors, high performance non-volatile memories, multi-functional spin logic devices, voltage controlled electronic components, and energy storage devices. 
    more » « less
  2. ; ; (, ACS Applied Materials & Interfaces)
    Pinhole-free and defect-free ultrathin dielectric tunnel barriers (TBs) is a key to obtaining high tunnelling magnetoresistance (TMR) and efficient switching in magnetic tunnel junctions (MTJs). Among others, atomic layer deposition (ALD) provides a unique approach for the fabrication of ultrathin TBs with several advantages including an atomic-scale control on the TB thickness, conformal coating, and low defects density. Motivated by this, this work explores fabrication and characterization of spin-valve Fe/ALD-Al2O3/Fe MTJs with ALD-Al2O3 TB thickness of 0.55 nm using in situ ALD. Remarkably, high TMR values of ~77% and ~ 90% have been obtained respectively at room temperature and at 100 K, which are comparable to the best reported values on MTJs having thermal AlOx TBs with optimized device structures. In situ scanning tunnelling spectroscopy characterization of the ALD-Al2O3 TBs has revealed a higher tunnel barrier height (Eb) of 1.33±0.06 eV, in contrast to Eb~0.3-0.6 eV for their AlOx TB counterparts, indicative of significantly lower defect concentration in the former. This first success of the MTJs with sub-nm thick ALD-Al2O3 TBs demonstrates the feasibility of in situ ALD for fabrication of pinhole-free and low-defect ultrathin TBs for practical applications and the performance could be further improved through device optimization. 
    more » « less
  3. ; ; ; ; (, Journal of Materials Research)
    Mechanical strain provides a knob for controlling the magnetization of the magnetostrictive-free layer of magnetic tunnel junctions (MTJs), with many applications for energy-efficient memory and computing. This requires integrating materials with high magnetostriction coefficient into MTJs, while still preserving the CoFeB-MgO tunnel barrier for high tunnel magnetoresistance (TMR). One way to accomplish this is to replace the CoFeB free layer of the MTJ with an exchange-coupled bilayer of CoFeB and a highly magnetostrictive ferromagnet like Galfenol (FeGa). Here, FeGa, a thermally stable magnetostrictive material, is integrated into CoFeB-based MTJs. We show that engineering a thin layer of CoFeB and FeGa provides a means of controlling the magnetic properties and switching field in FeGa-based MTJs, and that the exchange-coupled FeGa-CoFeB layer can be used as both a free layer and a fixed layer in the MTJ stack with TMR as high as 100%. 
    more » « less
  4. ; (, Journal of Physics: Condensed Matter)
    Abstract Magnetic tunnel junctions (MTJs), that consist of two ferromagnetic electrodes separated by an insulating barrier layer, have non-trivial fundamental properties associated with spin-dependent tunneling. Especially interesting are fully crystalline MTJs where spin-dependent tunneling is controlled by the symmetry group of wave vector. In this work, using first-principles quantum-transport calculations, we explore spin-dependent tunneling in fully crystalline SrRuO3/SrTiO3/SrRuO3(001) MTJs and predict tunneling magnetoresistance (TMR) of nearly 3000%. We demonstrate that this giant TMR effect is driven by symmetry matching (mismatching) of the incoming and outcoming Bloch states in the SrRuO3(001) electrodes and evanescent states in the SrTiO3(001) barrier. We argue that under the conditions of symmetry-controlled transport, spin polarization, whatever definition is used, is not a relevant measure of spin-dependent tunneling. In the presence of diffuse scattering, however, e.g. due to localized states in the band gap of the tunnel barrier, symmetry matching is no longer valid and TMR in SrRuO3/SrTiO3/SrRuO3(001) MTJs is strongly reduced. Under these conditions, the spin polarization of the interface transmission function becomes a valid measure of TMR. These results provide an important insight into understanding and optimizing TMR in all-oxide MTJs. 
    more » « less
  5. ; ; ; ; ; ; ; ; ; ; et al (, Nature Communications)
    Magnetic tunnel junctions (MTJs) with conventional bulk ferromagnets separated by a nonmagnetic insulating layer are key building blocks in spintronics for magnetic sensors and memory. A radically different approach of using atomically-thin van der Waals (vdW) materials in MTJs is expected to boost their figure of merit, the tunneling magnetoresistance (TMR), while relaxing the lattice-matching requirements from the epitaxial growth and supporting high-quality integration of dissimilar materials with atomically-sharp interfaces. We report TMR up to 192% at 10 K in all-vdW Fe3GeTe2/GaSe/Fe3GeTe2 MTJs. Remarkably, instead of the usual insulating spacer, this large TMR is realized with a vdW semiconductor GaSe. Integration of semiconductors into the MTJs offers energy-band-tunability, bias dependence, magnetic proximity effects, and spin-dependent optical-selection rules. We demonstrate that not only the magnitude of the TMR is tuned by the semiconductor thickness but also the TMR sign can be reversed by varying the bias voltages, enabling modulation of highly spin-polarized carriers in vdW semiconductors. 
    more » « less
  • Citation Formats
  • MLA
  • APA
  • Chicago
  • BibTeX
  • Save / Share this Record
  • Send to Email