An official website of the United States government
Abstract Solutions for scalable, high-performance optical control are important for the development of scaled atom-based quantum technologies. Modulation of many individual optical beams is central to applying arbitrary gate and control sequences on arrays of atoms or atom-like systems. At telecom wavelengths, miniaturization of optical components via photonic integration has pushed the scale and performance of classical and quantum optics far beyond the limitations of bulk devices. However, material platforms for high-speed telecom integrated photonics lack transparency at the short wavelengths required by leading atomic systems. Here, we propose and implement a scalable and reconfigurable photonic control architecture using integrated, visible-light modulators based on thin-film lithium niobate. We combine this system with techniques in free-space optics and holography to demonstrate multi-channel, gigahertz-rate visible beamshaping. When applied to silicon-vacancy artificial atoms, our system enables the spatial and spectral addressing of a dynamically-selectable set of these stochastically-positioned point emitters.
more »
« less
Perspective on integrated photonic devices using transparent conductive oxides: Challenges and opportunities
Transparent conductive oxides (TCOs) are gaining increasingly high research interest for integrated photonic devices due to the strong plasma dispersion effect and process compatibility with versatile optoelectronic platforms. In this perspective article, the authors gave a brief review of research efforts both on theoretical modeling and experimental demonstration of integrated photonic devices, especially on high-efficiency electro-optic modulators through the integration with plasmonics and silicon photonics. In addition, the authors discussed the challenge and opportunity associated with TCO photonic devices and the application in photonic integrated circuits (PICs) with emphasis on high mobility materials, high-speed E-O modulators, and large-scale integration. Finally, we conclude that collaboration with existing silicon photonics foundry is a necessary route to incorporate TCOs into existing PIC ecosystems.
more »
« less
- Award ID(s):
- 2240352
- PAR ID:
- 10531810
- Publisher / Repository:
- Applied Physics Letters
- Date Published:
- Journal Name:
- Applied Physics Letters
- Volume:
- 124
- Issue:
- 6
- ISSN:
- 0003-6951
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
García-Blanco, Sonia M.; Cheben, Pavel (Ed.)The benefits of photonics over electronics in the application of optical transceivers and both classical and quantum computing have been demonstrated over the past decades, especially in the ability to achieve high bandwidth, high interconnectivity, and low latency. Due to the high maturity of silicon photonics foundries, research on photonics devices such as silicon micro ring resonators (MRRs), Mach-Zehnder modulators (MZM), and photonic crystal (PC) resonators has attracted plenty of attention. Among these photonic devices, silicon MRRs using carrier depletion effects in p-n junctions represent optical switches manufacturable in the most compact magnitude at high volume with demonstrated switching energies ~5.2fJ/bit. In matrix multiplication demonstrated with integrated photonics, one approach is to couple one bus straight waveguide to several MRRs with different resonant wavelengths to transport signals in different channels, corresponding to a matrix row or column. However, such architectures are potentially limited to ~30 MRRs in series, by the limited free-spectral range (FSR) of an individual MRR. We show that PC switches with sub-micron optical mode confinements can have a FSR >300nm, which can potentially enable energy efficient computing with larger matrices of ~200 resonators by multiplexing. In this paper, we present designs for an oxide-clad bus-coupled PC switch with 1dB insertion loss, 5dB extinction, and ~260aJ/bit switching energy by careful control of the cavity geometry as well as p-n junction doping. We also demonstrate that air-clad bus-coupled PC switches can operate with 1dB insertion loss, 3dB extinction, and ~80aJ/bit switching energy.more » « less
-
Abstract Microwave photonics uses light to carry and process microwave signals over a photonic link. However, light can instead be used as a stimulus to microwave devices that directly control microwave signals. Such optically controlled amplitude and phase-shift switches are investigated for use in reconfigurable microwave systems, but they suffer from large footprint, high optical power level required for switching, lack of scalability and complex integration requirements, restricting their implementation in practical microwave systems. Here, we report Monolithic Optically Reconfigurable Integrated Microwave Switches (MORIMSs) built on a CMOS compatible silicon photonic chip that addresses all of the stringent requirements. Our scalable micrometer-scale switches provide higher switching efficiency and require optical power orders of magnitude lower than the state-of-the-art. Also, it opens a new research direction on silicon photonic platforms integrating microwave circuitry. This work has important implications in reconfigurable microwave and millimeter wave devices for future communication networks.more » « less
-
Abstract Neuromorphic photonics has become one of the research forefronts in photonics, with its benefits in low‐latency signal processing and potential in significant energy consumption reduction when compared with digital electronics. With artificial intelligence (AI) computing accelerators in high demand, one of the high‐impact research goals is to build scalable neuromorphic photonic integrated circuits which can accelerate the computing of AI models at high energy efficiency. A complete neuromorphic photonic computing system comprises seven stacks: materials, devices, circuits, microarchitecture, system architecture, algorithms, and applications. Here, we consider microring resonator (MRR)‐based network designs toward building scalable silicon integrated photonic neural networks (PNN), and variations of MRR resonance wavelength from the fabrication process and their impact on PNN scalability. Further, post‐fabrication processing using organic photochromic layers over the silicon platform is shown to be effective for trimming MRR resonance wavelength variation, which can significantly reduce energy consumption from the MRR‐based PNN configuration. Post‐fabrication processing with photochromic materials to compensate for the variation in MRR fabrication will allow a scalable silicon system on a chip without sacrificing today's performance metrics, which will be critical for the commercial viability and volume production of large‐scale silicon photonic circuits.more » « less
-
Reed, Graham T.; Knights, Andrew P. (Ed.)An array of active photonic devices is fabricated in unison after a heterogeneous integration process first metal-eutectically bonds these distinct materials as a distribution onto a silicon host wafer. The patterning out of heterogeneous materials followed by the formation of all photonic devices allows for wide-area fine-alignment without the need for discrete die alignment or placement. The integration process is designed as a CMOS-compatible, scalable method for bringing together distinct III-V epitaxial structures and optical-waveguiding epitaxial structures, demonstrating the capabilities of forming a multi-chip layer of photonic materials. Integrated GaAs-based vertical light-emitting transistors (LET) are designed and fabricated as the active devices whose third electrical terminal provides an electrical interconnect and thermal dissipation path to the silicon host wafer. The performance of these devices as both electrical transistors and spontaneous-emission optical devices is compared to their monolithically-integrated counterparts to investigate improvements in device characteristics when integrated onto silicon. The fabrication methods are modified and optimized for thin-film transferred materials and are then extended to transistor laser (TL) fabrication. Passive waveguiding structures are designed and simulated for coupling light from the active devices, and their fabrication scheme is presented such that it can be similarly performed with transferred materials. Work toward the demonstration of integrated transistor lasers is shown to represent progress toward an electronic-photonic circuit network. The combination of heterogeneous integration with three-terminal photonic structures enables an elegant solution to both packaging and signal interconnect constraints for the implementation of photonic logic in silicon photonics systems.more » « less
- Free Publicly Accessible Full Text
-
Accepted Manuscript1.0
- Journal Article:
- https://doi.org/10.1063/5.0179441
