Alkalinity is a critical parameter for describing the composition, pH buffer capacity, and precipitation potential of petroleum produced water (PW). Besides salinity, alkalinity and metal concentrations are generally greater in PW than in freshwater (FW) and seawater. This study presents batch reaction experimental and simulation results showing that the removal of Ba, Sr, and Cd from PW by dolomite is mostly due to sorption reactions, with sorption reactions and thus removal levels being higher for Cd than for Ba and Sr. In contrast, we found that the removal of Pb and As from PW by dolomite is largely due to precipitation and coprecipitation reactions of carbonate minerals on dolomite. Analyses of changes in the morphology as well as in the elemental and mineral composition of dolomite surface, along with pH, alkalinity, and Ba, Sr, Cd, Pb, and As removal measurements using synthetic PW and FW containing high concentrations (∼100 mg/L) of single and mixture toxic metals and metalloids (Ba, Sr, Cd, Pb, and As) at different initial alkalinity and pH conditions, indicate that in addition to salinity, alkalinity and pH generated from the dissolution of dolomite controls the removal of Ba, Sr, Cd, Pb, and As from PW by dolomite. However, we found that their impact is different for each metal in PW and FW. Ba, Sr, and Cd removal by dolomite is 10, 2, and 4 times smaller in PW than in freshwater (FW), respectively. Whereas As removal is practically the same regardless of salinity. Moreover, this study reveals the need of thermodynamic data of complex carbonate minerals formed from the precipitation of Ba, Sr, Cd, Pb, and As to capture the effect of alkalinity on their removal from PW by dolomite.
more »
« less
Transport of Ba, Sr, Cd, Pb, and As in dolomite saline aquifers injected with petroleum produced water
Predicting the transport of toxic metals in dolomite saline aquifers where petroleum produced water (PW) is commonly injected is important to prevent underground sources of drinking water contamination. This study presents new experimental results on the degree and impact of precipitation and sorption reactions on the transport of high concentrations of toxic metals (80-100 mg-Ba/L, 80-100 mg-Sr/L, 70-100 mg-Cd/L, 2-100 mg-Pb/L, and 80-100 mg-As/L) in dolomite injected with PW of variable alkalinity (0–200 mg/L), total dissolved solids (1700–77,000 mg/L), and pH (2–7). Changes in the elemental and mineral composition of dolomite surface were measured by BSEs SEM, SEM-EDS, and high-resolution XRD analyses. The results reveal a key role of alkalinity generated from the dissolution of dolomite. We show that a short initial stage where the removal of toxic metals is driven by the initial pH and alkalinity of PW is followed by a prolonged stage where the removal of toxic metals by sorption and precipitation reactions is driven by the alkalinity and pH that results from the kinetic dissolution of dolomite. Precipitated/coprecipitated metals were carbonate minerals reflecting the metal composition of PW. Attained removal levels of tested toxic metals from 1 L of PW using a dolomite core made of 200 g were >90% for Pb, >50% for As, >30% for Cd, and >5% for Ba and Sr. Apparently, the in-situ generation of alkalinity (carbonate ions) and sorption reactions of metals on dolomite catalyzes the precipitation of toxic metals as carbonate minerals. This catalytic effect of dolomite is different with PW and fresh water (FW) of low salinity (NaCl). Precipitation reactions are more prominent with FW than with PW, whereas sorption reactions are more prominent with PW than with FW.
more »
« less
- Award ID(s):
- 2200036
- PAR ID:
- 10534648
- Publisher / Repository:
- Elsevier
- Date Published:
- Journal Name:
- Geoenergy science and engineering
- Volume:
- 231
- Issue:
- 212342
- ISSN:
- 2949-8910
- Page Range / eLocation ID:
- https://doi.org/10.1016/j.geoen.2023.212342
- Subject(s) / Keyword(s):
- Produced water Dolomite Toxic metals Sorption reactions Precipitation reactions
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
Lead (Pb) solubility is commonly limited by dissolution–precipitation reactions of secondary mineral phases in contaminated soils and water. In the research described here, Pb solubility and free Pb2+ ion activities were measured following the precipitation of Pb minerals from aqueous solutions containing sulfate or carbonate in a 1:5 mole ratio in the absence and presence of phosphate over the pH range 4.0–9.0. Using X-ray diffraction and Fourier-transform infrared spectroscopic analysis, we identified anglesite formed in sulfate-containing solutions at low pH. At higher pH, Pb carbonate and carbonate-sulfate minerals, hydrocerussite and leadhillite, were formed in preference to anglesite. Precipitates formed in the Pb-carbonate systems over the pH range of 6 to 9 were composed of cerussite and hydrocerussite, with the latter favored only at the highest pH investigated. The addition of phosphate into the Pb-sulfate and Pb-carbonate systems resulted in the precipitation of Pb3(PO4)2 and structurally related pyromorphite minerals and prevented Pb sulfate and carbonate mineral formation. Phosphate increased the efficiency of Pb removal from solution and decreased free Pb2+ ion activity, causing over 99.9% of Pb to be precipitated. Free Pb2+ ion activities measured using the ion-selective electrode revealed lower values than predicted from thermodynamic constants, indicating that the precipitated minerals may have lower KSP values than generally reported in thermodynamic databases. Conversely, dissolved Pb was frequently greater than predicted based on a speciation model using accepted thermodynamic constants for Pb ion-pair formation in solution. The tendency of the thermodynamic models to underestimate Pb solubility while overestimating free Pb2+ activity in these systems, at least in the higher pH range, indicates that soluble Pb ion-pair formation constants and KSP values need correction in the models.more » « less
-
Abstract Trace element changes in fluids associated with ore-forming events in sedimentary basins may be recorded by contemporaneous cements, especially zoned carbonate minerals (microstratigraphy). Cement analysis using advanced mapping and analytical techniques including scanning electron microscopy cathodoluminescence (SEM-CL), charge contrast imaging, high-resolution X-ray computed tomography (XCT), and laser ablation–inductively coupled plasma–mass spectrometry (LA-ICP-MS) documents geochemical changes associated with Mississippi Valley–type mineralization in solution-collapse breccias of the Cambrian–Ordovician Knox Group (Tennessee and Kentucky, USA). Dolomite cement zonation coincident with changes in Fe and Mn can be observed with optical microscope CL in bands as narrow as 5 µm, whereas panchromatic SEM-CL reveals microfractures and cement subzones coincident with changes in La and Ce concentrations in bands as narrow as 0.1 µm. XCT scans image a high-density (Fe-rich) dolomite zone at the onset of late sulfide precipitation. The transition from pre-ore to ore-stage cementation is marked by increased Fe, Mn, Zn, Cd, Ga, Pb, and Sr and decreased La and Ce concentrations. Fine-scale metal depletion cycles during this transition may record metal precipitation from brine in response to the availability of reduced sulfur. Except for Fe and Mn, post-ore dolomite zones generally have low metal concentrations. Thus, dolomite microstratigraphy tracks systematic changes in brine metal concentrations modified by episodes of localized sulfide mineral precipitation.more » « less
-
more » « less
Highlights Non-carbonate components of BG11 media impact TIC calculation on average 4.00 mg/L at high pH.
BG11 media non-carbonate alkalinity (NCA) varies with pH: NCA (meq/L) = 0.0393×e0.2075×pH+ (2.086×10-9)e1.860×pH.
Monod kinetic constants with CO2, HCO3-, and CO32-as inorganic carbon sources are improved from a previous report.
Kinetic constants continue to be the only known reports considering multiple inorganic carbon sources.
Algal stoichiometric reactions are developed that account for variation in cell content and carbon source.
Abstract. Due to increasing atmospheric CO2, algal growth systems at high pH are of interest to support enhanced diffusion and carbon capture. Given the interactions between algal growth, pH, and alkalinity, data from Watson and Drapcho (2016) were re-examined to determine the impact of the non-carbonate constituents in BG11 media on estimates of Monod kinetic parameters, biomass yield, and cell stoichiometry. Based on a computational method, non-carbonate alkalinity (NCA) in BG11 media varies with pH according to: NCA (meq/L) = 0.0393×e0.2075×pH + (2.086×10-9)e1.860×pH (R2 = 0.999) over the pH range of 10.3 – 11.5. Updated maximum specific growth rates were determined to be 0.060, 0.057, and 0.051 hr-1 for CO2, HCO3, and CO3, respectively. Generalizable stoichiometric algal growth equations that consider variable nutrient ratios and multiple inorganic carbon species were developed. Improved kinetic and stoichiometric parameters will serve as the foundation for a dynamic mathematical model to support the design of high pH algal carbon capture systems. Keywords: Algae, Alkalinity, Carbon Abatement, Carbon Capture, Kinetics, Stoichiometry, Total Inorganic Carbon. -
The formation of precipitates (scales) during reinjection limits the reuse of oil and gas production water (produced water) for additional oil recovery. Selective removal strategies that target Ba and Sr, the primary scale-forming cations, would limit produced water treatment costs, reduce waste generation, and increase produced water reuse. A novel treatment technique for targeted Ba and Sr removal, complexation with polyelectrolyte polymers, is compared with chemical precipitation (sulfate addition and precipitative softening) for the removal of Ba and Sr from Kansas oil field brines. Four polymers were examined for cation removal, both with and without ultrafiltration: poly-vinyl sulfonate (PVS), poly(4-styrenesulfonate) (PSS), polyacrylic acid (PAA), and poly(4-styrenesulfonic acid- co -maleic acid) (PSSM). PSSM and PSS were effective for Ba and Sr removal from the lower salinity brine (TDS of 31 000 mg L −1 ), but exhibited limited Sr removal in the absence of Ba in the high salinity brine (TDS of 92 000 mg l −1 ). Similar results were achieved in both brines using sulfate addition. PSSM used in conjunction with ultrafiltration removed >99% of initial Sr and Ba from the lower salinity brine, while removing only 65% and 78% of Mg and Ca, respectively. These results compare favorably to precipitative softening, which removed >90% of all divalent cations from the same brine but was less selective for Ba and Sr. PAA plus ultrafiltration removed 58% of Sr (and 68% of Ca) from the high-salinity brine at pH 9. While increased Sr removal can be achieved by polymer-assisted ultrafiltration, further development of this process, including methods for polymer recovery and regeneration, will be needed to improve its performance compared to precipitative softening.more » « less
- Free Publicly Accessible Full Text
-
Accepted Manuscript1.0
- Journal Article:
- The DOI is not currently available.
