More Like this

1. Local structure of the Mg x Ni x Co x Cu x Zn x O( x =0.2) entropy-stabilized oxide: An EXAFS study

   https://doi.org/10.1111/jace.14756  

   Rost, Christina M. ; Rak, Zsolt ; Brenner, Donald W. ; Maria, Jon-Paul ( June 2017 , Journal of the American Ceramic Society)
2. Transport Properties of GdTe 1.8– x As x ( x = 0, 0.04)

   https://doi.org/10.1002/ejic.202000195  

   Poddig, Hagen ; Hobbis, Dean ; Alzahrani, Noha ; Doert, Thomas ; Nolas, George S. ( June 2020 , European Journal of Inorganic Chemistry)
3. Tuning Thermoelectric Properties of Type I Clathrate K 8–x Ba x Al 8+x Si 38–x through Barium Substitution

   https://doi.org/10.1021/acs.chemmater.6b00566  

   Sui, Fan ; Kauzlarich, Susan M. ( May 2016 , Chemistry of Materials)
4. Phase stability and mechanical properties of Mo 1- x N x with 0 ≤ x ≤ 1

   https://doi.org/10.1063/1.4998686  

   Balasubramanian, Karthik ; Huang, Liping ; Gall, Daniel ( November 2017 , Journal of Applied Physics)
5. Oxygen Incorporation in the Molecular Beam Epitaxy Growth of Sc x Ga 1−x N and Sc x Al 1−x N

   https://doi.org/10.1002/pssb.201900612  

   Casamento, Joseph ; Xing, Huili Grace ; Jena, Debdeep ( January 2020 , physica status solidi (b))

   Secondary‐ion mass spectrometry (SIMS) is used to determine impurity concentrations of carbon and oxygen in two scandium‐containing nitride semiconductor multilayer heterostructures: Sc_xGa_1−xN/GaN and Sc_xAl_1−xN/AlN grown by molecular beam epitaxy (MBE). In the Sc_xGa_1−xN/GaN heterostructure grown in metal‐rich conditions on GaN–SiC template substrates with Sc contents up to 28 at%, the oxygen concentration is found to be below 1 × 10¹⁹ cm⁻³, with an increase directly correlated with the scandium content. In the Sc_xAl_1−xN–AlN heterostructure grown in nitrogen‐rich conditions on AlN–Al₂O₃template substrates with Sc contents up to 26 at%, the oxygen concentration is found to be between 10¹⁹and 10²¹ cm⁻³, again directly correlated with the Sc content. The increase in oxygen and carbon takes place during the deposition of scandium‐alloyed layers.

    

   more » « less