An official website of the United States government
Abstract Structural supercapacitors that simultaneously bear mechanical loads and store electrical energy have exciting potential for enhancing the efficiency of various mobile systems. However, a significant hurdle in developing practical structural supercapacitors is the inherent trade‐off between their mechanical properties and electrochemical capabilities, particularly within their electrolytes. This study demonstrates a tough polymer electrolyte with enhanced multifunctionality made through the controlled hydration of a solid polymer electrolyte with poly(lactic acid) (PLA) and lithium salts. Characterization via differential scanning calorimetry, X‐ray diffraction, and Fourier transform infrared spectroscopy confirms the consistent amorphous solid solution phase in varying salt concentrations, whether dried or hydrated. Electrochemical tests and tensile tests are performed to evaluate the ionic conductivity and mechanical properties of these electrolytes. The results indicate that the strategic incorporation of water in the polymer electrolyte significantly enhances the ionic conductivity while preserving its mechanical properties. A specific composition demonstrated a remarkable increase in ionic conductivity (3.11 µS cm−1) coupled with superior toughness (15.4 MJ m−3), significantly surpassing the base polymer. These findings open new horizons for integrating electrochemical functionality into structural polymers without compromising their mechanical properties. Additionally, the paper reports the successful fabrication and testing of structural supercapacitor prototypes combining carbon fibers with fabricated electrolytes, showcasing their potential for diverse applications.
more »
« less
This content will become publicly available on August 9, 2025
Advancing Structural Supercapacitors with Hydrated Polymer
Structural supercapacitors, capable of bearing mechanical loads while storing electrical energy, hold great promise for enhancing mobile system efficiencies. However, developing practical structural supercapacitors often involves a challenging balance between mechanical and electrochemical performance, particularly in their electrolytes. Traditional research has focused on bi-continuous phase electrolytes (BPEs), which typically comprise high liquid content that weakens mechanical strength, and inert solid phases that hinder ion conduction and block electrode surfaces. Our previous work introduces a novel approach with a hydrated polymer electrolyte, demonstrating enhanced multifunctionality. This electrolyte, derived from controlled hydration of PET-LiClO4, forms a trihydrate (LiClO4∙3H2O) structure, where water molecules bond with ions without forming a liquid phase, thereby improving ion mobility while maintaining the base polymer's mechanical properties. This new design also promotes better electrochemical interfaces with electrodes, a significant advancement over traditional BPEs. In this study, we further enhance the performance and processability of such hydrated polymer electrolytes by incorporating polylactic acid (PLA) as the base polymer and lithium bis(trifluoromethanesulfonyl)imide (LiTFSI) as the salt. The electrolyte, prepared through solution casting and subsequent controlled hydration, consistently remains an amorphous solid solution in both dry and hydrated states, as confirmed by DSC, XRD, and FTIR analyses. Our tests on ionic conductivity and mechanical properties reveal that adding water to the polymer electrolyte substantially increases ionic conductivity while retaining mechanical properties. A specific composition demonstrated a remarkable increase in ionic conductivity coupled with superior toughness surpassing the base polymer. Furthermore, we successfully fabricated and tested structural supercapacitor devices made of composites of carbon fibers and these new electrolytes. The prototypes presented enhanced toughness with significant energy storage performance, demonstrating their vast application potential due to their outstanding multifunctionality.
more »
« less
- Award ID(s):
- 2217172
- PAR ID:
- 10535360
- Publisher / Repository:
- The Electrochemical Society
- Date Published:
- Journal Name:
- ECS Meeting Abstracts
- Volume:
- MA2024-01
- Issue:
- 1
- ISSN:
- 2151-2043
- Page Range / eLocation ID:
- 5 to 5
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
The rapid growth of mobile, portable, wearable and flexible electronics leads to the increasing demand for energy storage devices using solid-state polymer electrolytes (PEs), which outperform liquid electrolytes in terms of safety, mechanical properties, and simplicity of device fabrication and packaging. However, processing PEs will always introduce solvent molecules that greatly affect the ionic conductivity and mechanical properties. For example, PEs prepared through solution-casting methods always have solvent residues. A trace amount of water molecules absorbed from the air is also inevitable. Recently, we demonstrated the controlled introduction of solvent molecules to PEs to balance the ionic conductivity and mechanical stiffness for structural energy storage applications. To better understand how solvent molecules behave and interact with other components in PEs, here we present the molecular dynamics simulation of a representative polymer electrolyte system with various water content. We use simulation results to determine the effect of trace water content before forming a liquid phase on ionic conductivity and mechanical properties. The insights into the molecular interactions in the PE system will help us design and optimize Pes’ composition and processing for practical applications. The simulation model of polymer electrolyte is built with polyethylene oxide (PEO) and lithium perchlorate (LiClO4) with various water contents, in which the water molecule to lithium-ion ratio ranges from 0 to 3. The electrolyte with each water content is simulated between two graphene electrodes to determine its ionic conductivity. Uniaxial deformation has been performed on the electrolyte to obtain the mechanical properties. All simulations were performed using the molecular dynamics simulation code LAMMPS with the CHARMM force field. The results show that the ionic conductivity of the polymer electrolyte system increases significantly (up to one order of magnitude) with the increase of water content (up to 3 water molecules per lithium ion), even when the added water does not form a continuous liquid phase. The change of ionic conductivity with water content is correlated to the degree of association between different types of ions or molecules in the system, as evidenced by the evaluation of the radial distribution functions. As the association between polymer molecules and lithium ions reduces with increasing water, it becomes easier for the lithium ions to diffuse and resulting in higher ionic conductivity. It is also observed that the perchlorate ions’ interactions with polymer molecules remain the same with different water contents, which shows different roles of lithium ions and perchlorate ions in ion conduction in this system. On the other hand, the modulus of elasticity of the polymer electrolyte does not change much with the increase of water, which agrees with the previous experimental work of our group. This means that the trace amount of water is strongly associated with other solid molecules or ions and is not affecting the stiffness of the system as long as no liquid phase is formed. The results will lead to novel strategies to design polymer electrolytes with both high ionic conductivity and good mechanical properties for flexible or multifunctional energy storage applications.more » « less
-
All-solid-state lithium ion batteries replace the traditional liquid electrolyte with a conductive solid polymer electrolyte. Replacing the liquid electrolyte in batteries has the potential to improve safe use of batteries without the need for hermetic sealing, extending the operating temperature range, and extending the lifetime of the battery. However, solid polymer electrolytes often have non-competitive conductivity compared to liquid electrolytes. Improving the conductivity of solid polymer electrolytes based on an understanding of structure-property relationships is not yet well understood, but it is believed to depend heavily on the localized segmental motion of polymer chains. This work attempts to describe the role of polymer segmental motion on lithium ion transport through the synthesis and characterization of phosphonium ionenes that include poly(ethylene oxide) “soft” segments. Synthetically, these segmented polymers offer an opportunity to systematically control the segmental motion of polymer chains (i.e. glass transition temperature) through control of PEO incorporation. Prepared by step-growth polymerization, these segmented phosphonium ionenes achieve molecular weights up to 40,000 g/mol. Also, the degradation and glass transition temperatures are dependent on the percent incorporation of PEO as determined by thermogravimetric analysis and differential scanning calorimetry, respectively. The ability to influence the physical properties of this unique class of polyelectrolyte provides a unique opportunity to systematically probe the impact of glass transition temperature on the ion transport properties of solid polymer electrolytes in lithium ion batteries. Our initial results from electrochemical impedance as well as the charge/discharge performance of these novel solid polymer electrolytes in coin cell battery assemblies will also be presented.more » « less
-
Solid polymer electrolytes offer potential improvements to lithium ion batteries that include extending their operating temperature range and improving the safe use of the batteries by inhibiting lithium dendrite formation. Because solid polymer electrolytes replace traditional liquid electrolytes as the lithium ion transport medium and also act as the electrode separator, these materials must offer good ionic conductivity along with providing good interfacial contact with the electrode material. This work presents the synthesis and characterization of polymer blends comprised poly(ethylene oxide) and phosphonium ionenes. Ionenes are a class of polycation that includes positive charges within the polymer backbone. Because the positive charge is a part of the polymer chain, the spacing and distribution of these charges have a significant impact on the properties of ionenes. This research focuses on determining the role of charge spacing and distribution of charges along the backbone of phosphonium ionenes on their ability to transport lithium ions. To accomplish this, phosphonium ionenes are blended with low molecular weight poly(ethylene oxide) (e.g. less than 3,000 g/mol) at mass ratios of 20:1, 10:1, and 5:1. The resulting blended solid polymer electrolyte membranes are evaluated for their thermal, mechanical and electrochemical properties along with their charge/discharge performance in coin cell batteries. The dependence of phosphonium ionene structure as well as the composition of SPE blends will be presented.more » « less
-
The use of highly conductive solid-state electrolytes to replace conventional liquid organic electrolytes enables radical improvements in the reliability, safety and performance of lithium batteries. Here, we report the synthesis and characterization of a new class of nonflammable solid electrolytes based on the grafting of ionic liquids onto octa-silsesquioxane. The electrolyte exhibits outstanding room-temperature ionic conductivity (∼4.8 × 10 −4 S cm −1 ), excellent electrochemical stability (up to 5 V relative to Li + /Li) and high thermal stability. All-solid-state Li metal batteries using the prepared electrolyte membrane are successfully cycled with high coulombic efficiencies at ambient temperature. The good cycling stability of the electrolyte against lithium has been demonstrated. This work provides a new platform for the development of solid polymer electrolytes for application in room-temperature lithium batteries.more » « less
