An official website of the United States government
In this paper, material deformation during ultra-precision machining (UPM) on the C-, R-, and A-planes of sapphire was investigated using the slip/fracture activation model where the likelihood of activation of individual plastic deformation and fracture systems on different crystallographic planes was calculated. The stress data obtained from molecular dynamics (MD) simulations were utilized, and the slip/fracture activation model was developed by incorporating the principal stresses in calculating the plastic deformation and fracture cleavage parameters. The analysis methodology was applied to study material deformation along various cutting orientations in sapphire. The stress field at crack initiation during UPM on C-, R-, and A-planes of sapphire was calculated using molecular dynamics (MD) simulations. An equation describing the relationship between crack initiation and its triggering parameters was formulated considering the systems’ plastic deformation and cleavage fractures. The model can qualitatively predict the crack initiations for various cutting orientations. The proposed model was verified through ultra-precision orthogonal plunge cut experiments along the same cutting orientations as in the MD simulations.
more »
« less
Theoretical and molecular dynamics studies of critical resolved shear stress for rhombohedral twinning of sapphire
Single crystalline sapphire (-) possesses superior mechanical, thermal, chemical, and optical properties over a wide range of temperatures and pressure conditions, allowing it for a broad spectrum of industrial applications. For the past few decades, research has aimed at comprehensive understanding of its plastic deformation mechanisms under mechanical loading. In this study, we have employed molecular dynamics (MD) simulations to study rhombohedral twinning of sapphire, which is of critical importance in understanding the plastic deformation of sapphire as one of most commonly observed deformation modes. Since the critical resolved shear stress (CRSS) plays a pivotal role in describing the activation of slip systems, it is adopted in this study as the key parameter for analysis. The CRSS is calculated during the uniaxial compression test of a cubic sapphire crystal, oriented to exclusively activate rhombohedral twinning deformation, under simulation conditions such as temperature, strain rate, and system size. Furthermore, a theoretical model of CRSS is constructed based on theories of thermal activation processes, then empirically fitted to CRSS data gathered from the MD simulations. This model accurately captures the relationships between CRSS and external parameters including temperature, strain rate, and system size and shows excellent agreements with the simulation results.
more »
« less
- Award ID(s):
- 2009150
- PAR ID:
- 10537964
- Editor(s):
- Sinnott, Susan
- Publisher / Repository:
- Elsevier
- Date Published:
- Journal Name:
- Computational Materials Science
- Volume:
- 244
- Issue:
- C
- ISSN:
- 0927-0256
- Page Range / eLocation ID:
- 113278
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
The Japan Society for Precision Engineering (Ed.)Machining is in general conducted in multiple paths and thus residual stress and subsurface damage formed by previous cut may influence subsequent cutting. Ceramics materials are extremely brittle and prone to cracks. Ultra-precision machining with very small depth of cut enables ductile mode cutting. There have been various reports that critical depth of cut (CDC) for single crystal sapphire exists, where the ductile to brittle transition occurs. However, the CDC of subsequent cutting changes due to the influence of residual stress and subsurface damage by previous cut. This study investigates the indirect effect of residual stress and subsurface damage on the critical depth of cut of the second cut by analyzing the plastic deformation mechanisms activated during 2-step machining on A-plane of sapphire. It was found that the [1#100] machining orientation was most suitable since the critical depth of cut remained fairly constant due to dominant rhombohedral twinning activation during subsequent machining operations.more » « less
-
Twinning is a major mechanism of plastic deformation in hexagonal close-packed (hcp) structures. However, a mechanistic understanding of twin nucleation and growth has yet to be established. This paper reviews the recent progress in the understanding of twinning in hcp materials—particularly the newly discovered phase transformation-mediated twinning mechanisms—in terms of crystallographical analysis, theoretical mechanics calculations, and numerical simulations. Moreover, the relationship between phase transformation-mediated twinning mechanisms and twinning dislocations are presented, forming a unified understanding of deformation twinning. Finally, this paper also reviews the recent studies on transformation twins that are formed in hcp martensite microstructures after various phase transformations, highlighting the critical role of the mechanical loading in engineering a transformation twin microstructure.more » « less
-
null (Ed.)Stress-strain responses and twinning characteristics are studied for a rolled AZ31B magnesium alloy under three different stress states: tension along the normal direction (NDT), compression along the rolled direction (RDC), and torsion about the normal direction (NDTOR) using companion specimens interrupted at incremental strain levels. Tension twinning is extensively induced in twinning-favorable NDT and RDC. All the six variants of tension twin are activated under NDT, whereas a maximum of four variants is activated under RDC. Under NDTOR, both tension twins and compression twins are activated at relatively large strains and twinning occurs in a small fraction of favored grains rather than in the majority of grains. Secondary and tertiary twins are observed in the favorably-orientated grains at high strain levels. Deformation under each stress state shows three stages of strain hardening rate: fast decrease (Stage I), sequential increase (Stage II), and progressive decrease (Stage III). The increase in the hardening rate, which is more significant under NDT and RDC as compared to NDTOR, is attributed to the hardening effect of twin boundaries and twinning texture-induced slip activities. The hardening effect of twin boundaries include the dynamic Hall-Petch hardening induced by the multiplication of twin boundaries (TBs) and twin-twin boundaries (TTBs) as well as the hardening effect associated with the energetically unfavorable TTB formation. When the applied plastic strain is larger than 0.05 under NDT and RDC, the tension twin volume fraction is higher than 50%. The twinning-induced texture leads to the activation of non-basal slips mainly in the twinned volume, i.e. prismatic slips under NDT and pyramidal slips under RDC. The low work hardening under NDTOR is due to the prevailing basal slips with reduced twinning activities under NDTOR.more » « less
-
The U-Pb system in titanite has been shown to be reset during a variety of high-temperature processes including high-temperature deformation, but post-deformation modification and recovery of crystal-lattice strain have so far made U-Pb equilibration mechanism from deformed titanites equivocal. Microstructures, including mechanical twinning and subgrain rotation recrystallization are more likely to be preserved at low-temperatures, but the systematics of chemical equilibration have not been established for these conditions. This study identifies progressive crystallographic misorientation and deformation twins in titanite porphyroclasts from the Wasatch Fault Zone, Utah, USA. The microstructures, mapped using electron backscatter diffraction (EBSD), developed at ~11 km depth during 300–400 ºC crystal-plastic deformation within the ductile fault zone. These microstructural maps were used to guide laser ablation-split stream ICP-MS analysis: U-Pb isotopes measured in tandem with major and trace element contents. Despite the low temperature, U-Pb and trace element contents in titanite equilibrated, at least partially, during deformation. Both major and trace elements in titanite also likely partitioned with a fluid and in response to the (re)crystallization of other mineral phases in the fault zone. Chemical zoning and crystal lattice recovery suggestive of fluid-aided recrystallization are absent, and the main mechanism for this resetting may instead be an enhancement of element mobility along microstructure dislocations. These processes are interpreted to record complex open-system behavior of titanite caused by crystal-plastic deformation during the initiation of the WFZ. This presentation will summarize the comparative analysis of microstructure by EBSD and titanite chemistry by LASS-ICP-MS, and how it bears on the understanding of elemental mobility in titanite during low-temperature crystal-plastic deformation.more » « less
- Free Publicly Accessible Full Text
-
Accepted Manuscript1.0
- Journal Article:
- https://doi.org/10.1016/j.commatsci.2024.113278
