skip to main content
US FlagAn official website of the United States government
dot gov icon
Official websites use .gov
A .gov website belongs to an official government organization in the United States.
https lock icon
Secure .gov websites use HTTPS
A lock ( lock ) or https:// means you've safely connected to the .gov website. Share sensitive information only on official, secure websites.

Explore Research Products in the PAR
It may take a few hours for recently added research products to appear in PAR search results.


Title: MIMO/RIS Communication via Beam Networks: Three Case Studies
In MIMO communications, it is expensive and sometimes impossible to obtain timely channel state information at transmitter (CSIT) when the number of antennas is large. Furthermore, if the carrier frequency is high, the variation of the phases of the channel state information is significant with small movement in the channels. On the other hand, spatial signal path directions and the amplitudes of path gains vary slowly. We propose a beam network methodology for multi-antenna communication using such partial CSIT as directions and amplitudes instead of the conventional approach that employs full CSIT. Three representative problems are presented to demonstrate the simplicity and performance of the methodology. These include the single-user MIMO channel, a MIMO interference channel, and a multicast network via a reconfigurable intelligent surface (RIS). In particular, we see that the usual high complexity of RIS state design can be simplified to choosing states to connect an incoming beam to outgoing beams.  more » « less
Award ID(s):
2128659
PAR ID:
10538378
Author(s) / Creator(s):
; ; ;
Publisher / Repository:
IEEE
Date Published:
ISBN:
978-1-7281-9054-9
Page Range / eLocation ID:
575 to 580
Subject(s) / Keyword(s):
MIMO, Beamforming RIS Multicast Interference Channel
Format(s):
Medium: X
Location:
Denver, CO, USA
Sponsoring Org:
National Science Foundation
More Like this
  1. ; ; ; (, IEEE Open Journal of Vehicular Technology)
    Future wireless networks could benefit from the energy-efficient, low-latency, and scalable deployments that Reconfigurable Intelligent Surfaces (RISs) offer. However, the creation of an effective low overhead channel estimate technique is a major obstacle in RIS-assisted systems, especially given the high number of RIS components and intrinsic hardware constraints. This research examines the uplink of a RIS-empowered multi-user MIMO communication system and presents a novel semi-blind channel estimate approach. Unlike current approaches, which rely on pilot-based channel estimation, our methodology uses data to estimate channels, considerably enhancing the achievable rate. We provide a closed-form deterministic expression for the uplink achievable rate in actual settings where the channel state information (CSI) must be estimated rather than assumed perfect. The results of the simulations show that the formula obtained is accurate, with a close alignment between the deterministic and actual achievable rates (generally between 2 5% deviations). The proposed approach outperforms traditional approaches, resulting in rate increases of up to 35–40%, especially in instances with more RIS elements. These findings illustrate RIS technology's tremendous potential to improve system capacity and coverage, providing useful insights for optimizing RIS adoption in future wireless networks. 
    more » « less
  2. ; ; ; (, ITU Journal on Future and Evolving Technologies)
    Millimeter-wave (mmWave) communications is a key enabler towards realizing enhanced Mobile Broadband (eMBB) as a key promise of 5G and beyond, due to the abundance of bandwidth available at mmWave bands. An mmWave coverage map consists of blind spots due to shadowing and fading especially in dense urban environments. Beam-forming employing massive MIMO is primarily used to address high attenuation in the mmWave channel. Due to their ability in manipulating the impinging electromagnetic waves in an energy-efficient fashion, Reconfigurable Intelligent Surfaces (RISs) are considered a great match to complement the massive MIMO systems in realizing the beam-forming task and therefore effectively filling in the mmWave coverage gap. In this paper, we propose a novel RIS architecture, namely RIS-UPA where the RIS elements are arranged in a Uniform Planar Array (UPA). We show how RIS-UPA can be used in an RIS-aided MIMO system to fill the coverage gap in mmWave by forming beams of a custom footprint, with optimized main lobe gain, minimum leakage, and fairly sharp edges. Further, we propose a configuration for RIS-UPA that can support multiple two-way communication pairs, simultaneously. We theoretically obtain closed-form low-complexity solutions for our design and validate our theoretical findings by extensive numerical experiments. 
    more » « less
  3. ; ; ; ; (, IEEE Transactions on Wireless Communications)
    Downlink reconfigurable intelligent surface (RIS)-assisted multi-input-multi-output (MIMO) systems are considered with far-field, near-field, and hybrid-far-near-field channels. According to the angular or distance information contained in the received signals, 1) a distance-based codebook is designed for near-field MIMO channels, based on which a hierarchical beam training scheme is proposed to reduce the training overhead; 2) a combined angular-distance codebook is designed for hybrid-far-near-field MIMO channels, based on which a two-stage beam training scheme is proposed to achieve alignment in the angular and distance domains separately. For maximizing the achievable rate while reducing the complexity, an alternating optimization algorithm is proposed to carry out the joint optimization iteratively. Specifically, the RIS coefficient matrix is optimized through the beam training process, the optimal combining matrix is obtained from the closed-form solution for the mean square error (MSE) minimization problem, and the active beamforming matrix is optimized by exploiting the relationship between the achievable rate and MSE. Numerical results reveal that: 1) the proposed beam training schemes achieve near-optimal performance with a significantly decreased training overhead; 2) compared to the angular-only far-field channel model, taking the additional distance information into consideration will effectively improve the achievable rate when carrying out beam design for near-field communications. 
    more » « less
  4. ; ; (, Proc. IEEE 9th International Workshop on Computational Advances in Multi-Sensor Adaptive Processing (CAMSAP))
    This paper explores the use of reconfigurable intelligent surfaces (RISs) for moving target detection in multi-input multi-output (MIMO) radar. Unlike previous related works that ignore the propa-gation delay difference between the direct path and the RIS-reflected path, we examine the detection problem in RIS-assisted MIMO radar by taking into account the effect of asynchronous propagation. Specifically, we first develop a general signal model for RIS-aided MIMO radar with multiple asynchronous RISs and arbitrary wave-forms. Next, we formulate the RIS design problem by maximizing the overall received signal energy. The resulting optimization problem is non-convex, which is solved with semidefinite relaxation (SDR) techniques. A coherent detector is introduced for target detection. Finally, numerical results are presented to demonstrate the performance of the RIS-aided MIMO radar in comparison with the conventional MIMO radar. 
    more » « less
  5. ; ; ; ; (, 2018 IEEE International Conference on Communications (ICC))
    The large spectrum available in the millimeter- Wave (mmWave) band has emerged as a promising solution for meeting the huge capacity requirements of the 5th generation (5G) wireless networks. However, to fully harness the potential of mmWave communications, obstacles such as severe path loss, channel sparsity and hardware complexity should be overcome. In this paper, we introduce a generalized reconfigurable antenna multiple-input multiple-output (MIMO) architecture that takes advantage of lens-based reconfigurable antennas. The considered antennas can support multiple radiation patterns simultaneously by using a single RF chain. The degrees of freedom provided by the reconfigurable antennas are used to, first, combat channel sparsity in MIMO mmWave systems. Further, to suppress high path loss and shadowing at mmWave frequencies, we use a rate- one space-time block code. Our analysis and simulations show that the proposed reconfigurable MIMO architecture achieves full-diversity gain by using linear receivers and without requiring channel state information at the transmitter. Moreover, simulations show that the proposed architecture outperforms traditional MIMO transmission schemes in mmWave channel settings. 
    more » « less
  • Citation Formats
  • MLA
  • APA
  • Chicago
  • BibTeX
  • Save / Share this Record
  • Send to Email