skip to main content
US FlagAn official website of the United States government
dot gov icon
Official websites use .gov
A .gov website belongs to an official government organization in the United States.
https lock icon
Secure .gov websites use HTTPS
A lock ( lock ) or https:// means you've safely connected to the .gov website. Share sensitive information only on official, secure websites.

Explore Research Products in the PAR
It may take a few hours for recently added research products to appear in PAR search results.


Title: MULTIFUNCTIONAL CHARACTERIZATION OF 3D PRINTED STRUCTURAL BATTERY COMPOSITES FOR BATTERY HEALTH MONITORING
As a promising lightweight multifunctional material, carbon fiber structural battery composites have great potentials to enable longer service life and operating distance for the rapidly increasing mobile electric technologies. While simultaneously carrying mechanical loads and storing electrical energy, the developed multifunctional composites can achieve “massless” energy storage and further extend to sensing and energy harvesting for self-powered structural health monitoring. However, it is still very challenging to predict the state-of-health of structural battery composites due to a lack of understanding of underlying coupled mechanical-electrochemical phenomena during operation. In this study, we first use a novel 3D printing method to fabricate and tailor microstructure of the multifunctional carbon fiber composites. With an optimal electrode layer thickness of 0.4 mm, the stable specific capacity at 1C reaches over 80% of the theoretical capacity of the electrode active materials (lithium iron phosphate) with an average energy density of 152 Wh/kg observed. The corresponding flexural modulus and flexural strength are 8.7 GPa and 69.6 MPa, respectively. The state-of-health of 3D printed structural battery composites under electrochemical cycling and external mechanical loadings are also investigated. The mechanical performance is not affected by the electrochemical charge-discharge processes. The structural battery composites under three-point bending testing show good capacity retention with rapid degradation of electrochemical performance observed near fracture point. The findings from this study not only provide insights for monitoring the state-of-health of structural battery but also show mechanical-electrochemical coupling as a potential way of self-powered structural health monitoring through the 3D printed multifunctional composites.  more » « less
Award ID(s):
2406820
PAR ID:
10538461
Author(s) / Creator(s):
;
Publisher / Repository:
Destech Publications, Inc.
Date Published:
ISBN:
9781605956930
Format(s):
Medium: X
Sponsoring Org:
National Science Foundation
More Like this
  1. ; ; (, Composites science and technology)
    null (Ed.)
    Structural health monitoring of fiber reinforced composites is an extensive field of research that aims to reduce maintenance costs through in-situ damage detection. However, the need for externally bonded sensor systems and complicated fabrication processes limit the widespread application of most current structural health monitoring techniques. This work introduces a novel multifunctional fiber reinforced composite that relies on a ferroelectric prepreg fabricated using dehydrofluorinated (DHF) polyvinylidene fluoride (PVDF), which exhibits a thermally stable piezoelectric response. The self-sensing material presented in this work requires minimal external components, as the piezoelectric sensing mechanism is fully contained within the composite. This is accomplished by fabricating a ferroelectric prepreg consisting of DHF PVDF infused woven fiberglass, which is sandwiched between woven carbon fabric layers that act as electrodes, thus forming a piezoelectric sensor fabricated with entirely structural composite materials. Notably, the sensing material is a fully distributed prepreg rather than discretely embedded sensors which enables simplified monitoring of complex structures. As the composite experiences damage under flexural and tensile loading, the internal change in strain results in a charge separation that is detectable as a voltage emission across the sample electrodes. The self-sensing capabilities of this material are explored using traditional mechanical testing techniques, showing comparable performance to common damage detection methods, all while eliminating the need for external bonding of sensors to the structure. 
    more » « less
  2. (, Composites science and technology)
    null (Ed.)
    Structural health monitoring of fiber reinforced composites is an extensive field of research that aims to reduce maintenance costs through in-situ damage detection. However, the need for externally bonded sensor systems and complicated fabrication processes limit the widespread application of most current structural health monitoring techniques. This work introduces a novel multifunctional fiber reinforced composite that relies on a ferroelectric prepreg fabricated using dehydrofluorinated (DHF) polyvinylidene fluoride (PVDF), which exhibits a thermally stable piezoelectric response. The self-sensing material presented in this work requires minimal external components, as the piezoelectric sensing mechanism is fully contained within the composite. This is accomplished by fabricating a ferroelectric prepreg consisting of DHF PVDF infused woven fiberglass, which is sandwiched between woven carbon fabric layers that act as electrodes, thus forming a piezoelectric sensor fabricated with entirely structural composite materials. Notably, the sensing material is a fully distributed prepreg rather than discretely embedded sensors which enables simplified monitoring of complex structures. As the composite experiences damage under flexural and tensile loading, the internal change in strain results in a charge separation that is detectable as a voltage emission across the sample electrodes. The self-sensing capabilities of this material are explored using traditional mechanical testing techniques, showing comparable performance to common damage detection methods, all while eliminating the need for external bonding of sensors to the structure. 
    more » « less
  3. ; ; ; (, Journal of Composite Materials)
    Spearing, M; Tsai, SW; Karbhari, VM (Ed.)
    Triboluminescence (TL) is a phenomenon of light emission induced by impact, stress, fracture, or an applied mechanical force. This phenomenon can be used to detect, evaluate, and predict mechanical failures in composites. In this report, we utilized manganese-doped zinc-sulphide (ZnS: Mn) and Polystyrene (PS) composite to fabricate a TL functional part via additive manufacturing. The morphology of the particles inside the polymer matrix were studied using scanning electron microscopy and micro CT scan. Thermoanalytical techniques such as differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA) were carried out to evaluate the thermal transitions and degradation of the composites. The mechanoluminescence performance of the printed samples is evaluated by three-point flexural test and observed to depend on processing conditions that can be utilized to achieve a strong light signal at different mechanical loads. The polymer composite fabrication and processing reduced particle size, enhanced particle dispersion, and altered the mechanical properties of the polymer to help increase the mechanoluminescence response up to 10 times in the 3D printed parts. The unique mechanoluminescence properties of 3D printed luminescent composite have great potential for structural monitoring applications. 
    more » « less
  4. ; ; ; ; (, Structural Health Monitoring)
    Integrating self-healing materials with structural health monitoring (SHM) represents a significant advancement in materials science and engineering. In applications such as aerospace, self-healing composites with SHM can detect and repair damage autonomously, enhancing safety and reducing maintenance time, which significantly improves structural durability by maintaining integrity and extending material service life. This research employs an experimental approach to validate the self-healing process of self-healing metal matrix composites reinforced with shape memory alloy fibers, by utilizing lead zirconate titanate (PZT) piezoelectric transducers mounted on the surface of the composite. A three-point bending test is used to induce damage in the metal matrix composites by applying a load at its midpoint while supporting it at both ends; then, self-healing is used to return the specimen to its original state. The ultrasonic signals from the PZT sensor were compared at three stages: pristine state, during bending (i.e., damage), and after the healing process, to evaluate the effectiveness of the healing process and health monitoring technique adopted for this study. Real-time monitoring using digital image correlation, laser profilometry, and mechanical testing was used to validate the damaged/healed signal state—demonstrated by improved recovered signal amplitude, reduced scatter energy, a notable decrease in damage indices root-mean-square deviation, normalized scatter energy, and stabilized wave propagation. The successful self-healing composite design and health monitoring results confirm the restoration of the specimen, which regained 84% of its initial shape deformation at 135 °C for 30 min (i.e., during the first step of healing). Complete shape restoration was achieved by raising the temperature to 150 °C for 90 min (during the second step of healing), recovering approximately 96% of the original flexural strength after healing. 
    more » « less
  5. ; ; (, ECS Meeting Abstracts)
    Layer-structured Na intercalation compounds such as NaxMO2 (M=Co, Mn, Cr) have attracted much attention as cathode materials for sodium-ion batteries due to their high volumetric and gravimetric energy densities. Among them, NaCrO2 with layered rock salt structure is one of the promising cathodes since NaCrO2 has a desirable flat and smooth charge/discharge voltage plateau.1 In addition, NaCrO2 has the highest thermal stability at charged state which makes it a potentially safer cathode material.2 The NaCrO2 exhibits a reversible capacity of 110 mAh g-1 with good cycling performance.3 However, the transition metal oxide (TMO) cathode materials in NIBs undergo severe chemo-mechanical deformations which leads to capacity fade and poor cycling and is the limiting factor of NIBs. The electrochemical characterization and examination of the electrode structure were the primary focus of several investigations. To improve the lifespan and performance of electrode materials for Na-ion batteries, it is vital to comprehend how Na ions impact the chemo-mechanical stability of the electrodes. In this talk, we will discuss the driving forces behind the structural and interfacial deformations on NaCrO2 cathodes. Digital image correlation measurements were conducted to probe strain evolution in the electrode during cycling. The free-standing composite NaCrO2 electrode was used for stain measurements in custom-cell assembly. The battery was cycled against Na metal in 1 M NaClO4 in PC. The first part of the study involves structural and interfacial deformations in the lower voltage range of 2.3 V to 3.5 V where x<0.5 in NaxCrO2. And the second part focuses on the structural and interfacial deformations in the voltage range of 2.3 V to 4.7 V where x>0.5 in NaxCrO2. In the preliminary studies, we observed that the initial insertion of Na ions leads to negative strain evolution (contraction) in the electrode, followed by expansions in the electrode at a higher state of discharge. Similar phenomena are also observed during charge cycles, where extraction of Na results in an initial contraction in the electrode, followed by expansion at a higher state of charge. Understanding the mechanisms behind chemo-mechanical deformations will allow to tune structure & material property for better electrochemical performance. 
    more » « less
  • Citation Formats
  • MLA
  • APA
  • Chicago
  • BibTeX
  • Save / Share this Record
  • Send to Email