skip to main content


This content will become publicly available on June 30, 2025

Title: Chlorine Concentrations in Metamorphic Wallrocks in the Sierra Nevada: Implications for Arc Halogen Budgets
Ongoing investigations of halogen element (F, Cl, Br, I) concentrations in rocks and minerals in the Cretaceous Sierra Nevada Batholith, CA, aim to elucidate the spatio-temporal distribution and budget of these important elements in a “typical” continental convergent margin arc. Using a 3.0 kW Axios (Panalytical) wavelength-dispersive X-ray fluorescence spectrometer (XRF) equipped with a Ge 111 crystal to eliminate second order interferences on Cl-Kα lines, the Pomona College XRF lab has undertaken a campaign-style study of Cl in pressed powder samples of metamorphic and metavolcanic rocks in the Sierra. This work complements pyrohydrolysis + ion chromatography (IC) and ICP-MS analyses the research team is undertaking at the University of Texas – Austin. Both labs quadruply wash powders to eliminate Cl contributions from decrepitated fluid inclusions or grain boundary deposits. Intercomparison between the two labs show correlation (r2 = 0.98) between analyses of the same unknown samples, but decreased accuracy of XRF (>30% relative) below 30 µg/g. Despite lower precision, XRF characterization is a relatively rapid and less labor intensive means to identify key Cl variations among rock types and to select samples for full analysis of all four halogen elements by pyrohydrolysis + IC (Cl,F) and ICP-MS (Br,I). Results thus far indicate that Mg- to Al-rich pelites ranging in metamorphic grade from phyllite to migmatite vary widely in Cl: 50–500 µg/g; cordierite-biotite hornfels are typically elevated in Cl (200–400 µg/g) and other lithologies such as skarns and amphibolite are highly varied (50–600 µg/g Cl); a localized study of a high temperature (650–750°C) migmatites surrounding a gabbro-diorite complex shows low and relatively uniform Cl (100 ± 50 µg/g) in the migmatites. This fundings suggests that Cl may have been mobilized into melts during biotite dehydration melting in the migmatites. Metavolcanic rocks vary from 20 to over 2000 µg/g Cl, suggesting post-eruptive exchange with exogenous fluids during hydrothermal alteration and metamorphism. Metavolcanic packages in different pendants, screens and septa show some localized patterns in Cl concentration that are being explored further.  more » « less
Award ID(s):
2211243 1338842 2105370
PAR ID:
10539184
Author(s) / Creator(s):
; ; ; ; ;
Publisher / Repository:
GSA Abstracts with Programs
Date Published:
Format(s):
Medium: X
Location:
Anaheim, CA
Sponsoring Org:
National Science Foundation
More Like this
  1. Halogens (F, Cl, Br, I) are primary components of volcanic gas emissions and play an essential role in continental arc magmatic environments due to their solubility in fluids that generate metallic ore deposits. Despite their ubiquity, the behavior and budget of halogens in continental arc environments are poorly constrained. We investigated the plutonic and volcanic halogen budgets in intermediate-to-felsic igneous rocks (56–77 wt% SiO2) from the Sierra Nevada (California) - a Mesozoic continental arc where plutonic and volcanic outcrops can be correlated via their geographic, compositional, and geochronologic framework. We measured the halogen concentrations of bulk rock powders and their leachates via ion chromatography (F, Cl) and ICP-MS (Br, I). Halogen concentrations in our rock powders range between 107–727 μg/g F, 13–316 μg/g Cl, 2–323 ng/g Br, and 1–69 ng/g I. In contrast, leachates yielded 3–4 orders of magnitude less Cl and F, one order of magnitude less I, and similar amounts of Br compared to their corresponding bulk rocks. Preliminary data show no significant differences between volcanic and plutonic samples, suggesting that halogen concentrations in these rocks are insensitive to shallow fractionation. Although F and I exhibit no correlation with major element compositions, Cl and Br display negative trends with increasing SiO2 and K2O, and positive trends with increasing Fe2O3T, MnO, MgO, CaO, and TiO2, suggesting mafic minerals as important hosts of structurally bound halogens. Overall, Sierran plutonic rocks display low halogen contents (max. F, Cl = 727, 315 μg/g), consistent with biotite- and apatite-bearing granitoids reported in [1]. This work suggests that halogens do not preferentially enrich in shallow plutonic or volcanic portions of a continental arc system and that mafic mineral phases likely serve as primary reservoirs of these elements in intermediate-to-felsic igneous rocks. These hypotheses will be further investigated in future work through in-situ analysis of halogen concentrations in crystals. [1] Teiber, Marks, Wenzel, Siebel, Altherr & Markl (2014), Chemical Geology, vol. 374–375, pp. 92–109, doi: 10.1016/j.chemgeo.2014.03.006 
    more » « less
  2. The halogens (F, Cl, Br, I) are cycled into the crust via subduction. The presence of F and Cl in arc settings impacts melt viscosity, igneous phase relations, and thermodynamic properties of magma in the pluton-to-volcano system, whereas the systematics of Br and I in melt systems are poorly understood. Mass balance constraints show that more halogens are subducted with the slab than are released during volcanism and passive degassing, suggesting that a halogen sink may exist in the lithosphere. Despite this, the halogen content of the upper continental crust of arc systems and distribution of halogens between plutonic and volcanic arc rocks are poorly quantified. This study presents whole rock halogen (F, Cl, Br, I) concentrations for 22 unaltered, geospatially- and temporally-related Cretaceous granitoid, hypabyssal plutonic, and volcanic rocks from the Sierra Nevada, California. This sampling approach allows direct comparison of plutonic and volcanic counterparts to make inferences about the pluton-volcano relationship. Because F behaves more incompatibly than Cl, Br, and I, late-stage fluid exsolution from melts may concentrate F in plutonic rocks and Cl, Br, and I in volcanic rocks. These whole rock halogen data provide a first-order approximation of the proportion of subducted halogens that are stored in the upper continental crust, and where along the magmatic plumbing path they are stored with important implications for their role in primary igneous processes such as pluton crystallization and volcanism. Ultimately, the results from this work will serve as the preliminary data for a larger study, provide insight into the magnitude of the roles the halogens play during primary igneous processes, and add to the limited halogen data on arc rocks. 
    more » « less
  3. Abstract

    A modification of energy dispersive X‐ray fluorescence (ED‐XRF) for analysis of trace element concentrations in suspended particulate matter (SPM) in seawater and intercomparison with high‐resolution inductively coupled plasma‐mass spectrometry (HR ICP‐MS) is presented. Approximately 250 SPM samples were collected on polycarbonate track‐etched filters in the Indian Ocean during the U.S. CLIVAR/CO2Repeat Hydrography meridional section I09N cruise in 2007. Samples were first analyzed by ED‐XRF, a nondestructive technique, for Al, P, Ti, Mn, Fe, Ni, Cu, and Zn and subsequently digested and quantified by HR ICP‐MS, creating two blind, basin‐scale data sets used for a paired statistical comparison. Our results found (1) ED‐XRF analysis using thin‐film principles can quantify the elemental composition of SPM at nanomolar concentrations found in the open ocean; (2) there was excellent agreement between ED‐XRF and HR ICP‐MS analyses for Al, Fe, and Mn and good agreement for P and Ti; (3) analytical differences were the largest for Cu, Ni, and Zn; (4) HR ICP‐MS methods have lower detection limits for most elements when compared to the ED‐XRF; (5) ED‐XRF analysis has a closer agreement to reported values for the NIST SRM 2783 standard and lower relative standard deviations when compared to the HR ICP‐MS. We recommend continued refinement of nondestructive ED‐XRF methods as this would allow for the easy exchange of filtered samples between lab groups for intercalibration and intercomparison of basin‐scale hydrographic cruises and archival for future analysis.

     
    more » « less
  4. Abstract

    X‐ray fluorescence (XRF) scanning of marine sediment has the potential to yield near‐continuous and high‐resolution records of elemental abundances, which are often interpreted as proxies for paleoceanographic processes over different time scales. However, many other variables also affect scanning XRF measurements and convolute the quantitative calibrations of element abundances and comparisons of data from different labs. Extensive interlab comparisons of XRF scanning results and calibrations are essential to resolve ambiguities and to understand the best way to interpret the data produced. For this study, we sent a set of seven marine sediment sections (1.5 m each) to be scanned by seven XRF facilities around the world to compare the outcomes amidst a myriad of factors influencing the results. Results of raw element counts per second (cps) were different between labs, but element ratios were more comparable. Four of the labs also scanned a set of homogenized sediment pellets with compositions determined by inductively coupled plasma‐optical emission spectrometry (ICP‐OES) and ICP‐mass spectrometry (MS) to convert the raw XRF element cps to concentrations in two ways: a linear calibration and a log‐ratio calibration. Although both calibration curves are well fit, the results show that the log‐ratio calibrated data are significantly more comparable between labs than the linearly calibrated data. Smaller‐scale (higher‐resolution) features are often not reproducible between the different scans and should be interpreted with caution. Along with guidance on practical calibrations, our study recommends best practices to increase the quality of information that can be derived from scanning XRF to benefit the field of paleoceanography.

     
    more » « less
  5. null (Ed.)
    A rapid and sensitive method is described for measuring perchlorate (ClO 4 − ), chlorate (ClO 3 − ), chlorite (ClO 2 − ), bromate (BrO 3 − ), and iodate (IO 3 − ) ions in natural and treated waters using non-suppressed ion chromatography with electrospray ionization and tandem mass spectrometry (NS-IC-MS/MS). Major benefits of the NS-IC-MS/MS method include a short analysis time (12 minutes), low limits of quantification for BrO 3 − (0.10 μg L −1 ), ClO 4 − (0.06 μg L −1 ), ClO 3 − (0.80 μg L −1 ), and ClO 2 − (0.40 μg L −1 ), and compatibility with conventional LC-MS/MS instrumentation. Chromatographic separations were generally performed under isocratic conditions with a Thermo Scientific Dionex AS16 column, using a mobile phase of 20% 1 M aqueous methylamine and 80% acetonitrile. The isocratic method can also be optimized for IO 3 − analysis by including a gradient from the isocratic mobile phase to 100% 1 M aqueous methylamine. Four common anions (Cl − , Br − , SO 4 2− , and HCO 3 − /CO 3 2− ), a natural organic matter isolate (Suwannee River NOM), and several real water samples were tested to examine influences of natural water constituents on oxyhalide detection. Only ClO 2 − quantification was significantly affected – by elevated chloride concentrations (>2 mM) and NOM. The method was successfully applied to quantify oxyhalides in natural waters, chlorinated tap water, and waters subjected to advanced oxidation by sunlight-driven photolysis of free available chlorine (sunlight/FAC). Sunlight/FAC treatment of NOM-free waters containing 200 μg L −1 Br − resulted in formation of up to 263 ± 35 μg L −1 and 764 ± 54 μg L −1 ClO 3 − , and up to 20.1 ± 1.0 μg L −1 and 33.8 ± 1.0 μg L −1 BrO 3 − (at pH 6 and 8, respectively). NOM strongly inhibited ClO 3 − and BrO 3 − formation, likely by scavenging reactive oxygen or halogen species. As prior work shows that the greatest benefits in applying the sunlight/FAC process for purposes of improving disinfection of chlorine-resistant microorganisms are realized in waters with lower DOC levels and higher pH, it may therefore be desirable to limit potential applications to waters containing moderate DOC concentrations ( e.g. , ∼1–2 mg C L −1 ), low Br − concentrations ( e.g. , <50 μg L −1 ), and circumneutral to moderately alkaline pH ( e.g. , pH 7–8) to strike a balance between maximizing microbial inactivation while minimizing formation of oxyhalides and other disinfection byproducts. 
    more » « less