Hexagonal semiconductors such as 4H SiC have important high-frequency, high-power, and high-temperature applications. The applications require accurate knowledge of both ordinary and extraordinary relative permittivities, ε and ε||, perpendicular and parallel, respectively, to the c axis of these semiconductors. However, due to challenges for suitable test setups and precision high-frequency measurements, little reliable data exists for these semiconductors especially at millimeter-wave frequencies. Recently, we reported ε|| of 4H SiC from 110 to 170 GHz. This paper expands on the previous report to include both ε and ε|| of the same material from 55 to 330 GHz, as well as their temperature and humidity dependence enabled by improving the measurement precision to two decimal points. For example, at room temperature, real ε and ε|| are constant at 9.77 ± 0.01 and 10.20 ± 0.05, respectively. By contrast, the ordinary loss tangent increases linearly with the frequency f in the form of (4.9 ± 0.1) 10−16 f. The loss tangent, less than 1 10−4 over most millimeter-wave frequencies, is significantly lower than that of sapphire, our previous low-loss standard. Finally, both ε and ε|| have weak temperature coefficients on the order of 10−4 /°C. The knowledge reported here is especially critical to millimeter-wave applications of 4H SiC, not only for solid-state devices and circuits, but also as windows for high-power vacuum electronics.
more »
« less
This content will become publicly available on June 21, 2025
Complex Permittivities of Ultra-Low-Loss 4H-SiC from 55 GHz to 330 GHz
Hexagonal semiconductors such as GaN and SiC
have important power applications at radio and millimeter-wave
(mmW) frequencies. They are characterized by both ordinary and
extraordinary permittivities, parallel and perpendicular to the
densest packed c plane, respectively. However, due to the
challenges of high-frequency measurements, little reliable data
exist for these permittivities especially at mmW frequencies.
Recently, for the first time, we reported the extraordinary
permittivity of 4H SiC at mmW frequencies using substrateintegrated
waveguides. We now report the ordinary permittivity of
the same material using several Fabry-Perot resonators to cover
most mmW frequencies. The resulted relative ordinary
permittivity of 9.76 ± 0.01 exhibits little dispersion and is
significantly lower than the previously reported extraordinary
permittivity of 10.2 ± 0.1. This confirms that both ordinary and
extraordinary permittivities are needed for accurate design and
model of devices fabricated on 4H SiC. By contrast, the measured
loss tangent increases linearly from 3 10−5 to 1.6 10−4 from 55
GHz to 330 GHz and can be fitted with (4.9 ± 0.1) 10−16 f, where
f is the frequency in Hz. In fact, 4H SiC is the lowest-loss solid we
have ever measured. The present approaches for permittivity
characterization can be extended to other solids.
more »
« less
- PAR ID:
- 10542567
- Publisher / Repository:
- IEEE
- Date Published:
- ISBN:
- 979-8-3503-6273-2
- Page Range / eLocation ID:
- 1 to 4
- Subject(s) / Keyword(s):
- Fabry-Perot resonator loss tangent millimeter wave permittivity silicon carbide
- Format(s):
- Medium: X
- Location:
- Washington, DC, USA
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
For millimeter-wave power applications, GaN high-electron mobility transistors (HEMTs) are often grown epitaxially on a high-purity semi-insulating c-axis 4H-SiC substrate. For these anisotropic hexagonal materials, the design and modeling of microstrip and coplanar interconnects require detailed knowledge of both the ordinary permittivity ε⊥ and the extraordinary permittivity εǁ perpendicular and parallel, respectively, to the c-axis. However, conventional dielectric characterization techniques make it difficult to measure εǁ alone or to separate εǁ from ε⊥. As a result, there is little data for εǁ, especially at millimeter-wave frequencies. This work demonstrates techniques for characterizing εǁ of 4H SiC using substrate-integrated waveguides (SIWs) or SIW resonators. The measured εǁ on seven SIWs and eleven resonators from 110 to 170 GHz is within ±1% of 10.2. Because the SIWs and resonators can be fabricated on the same SiC substrate together with HEMTs and other devices, they can be conveniently measured on-wafer for precise material-device correlation. Such permittivity characterization techniques can be extended to other frequencies, materials, and orientations.more » « less
-
Currently, lacking suitable test structures, little data exist for the permittivity of hexagonal materials such as GaN and SiC at millimeter-wave frequencies, especially for the extraordinary permittivity ε || as opposed to the ordinary permittivity ε ⊥ . This paper demonstrates for the first time that it is possible to characterize ε || of c-axis 4H SiC using on-wafer measurements of substrate-integrated-waveguide resonators. In fact, measurements on eleven resonators yield a relative ε || of 10.27 ± 0.03 and a loss tangent tanδ<0.02 over the D band (110-170 GHz). The on-wafer measurements of resonators and other devices fabricated on the same SiC substrate can allow material property to be closely correlated with device performance. The present approach can be extended to materials of other types and orientations.more » « less
-
Abstract—Sub-Terahertz frequencies (frequencies above 100 GHz) have the potential to satisfy the unprecedented demand on data rate on the order of hundreds of Gbps for sixth-generation (6G) wireless communications and beyond. Accurate beam tracking and rapid beam selection are increasingly important since antenna arrays with more elements generate narrower beams to compensate for additional path loss within the first meter of propagation distance at sub-THz frequencies. Realistic channel models for above 100 GHz are needed, and should include spatial consistency to model the spatial and temporal channel evolution along the user trajectory. This paper introduces recent outdoor urban microcell (UMi) propagation measurements at 142 GHz along a 39 m 12 m rectangular route (102 m long), where each consecutive and adjacent receiver location is 3 m apart from each other. The measured power delay profiles and angular power spectrum at each receiver location are used to study spatial autocorrelation properties of various channel parameters such as shadow fading, delay spread, and angular spread along the track. Compared to the correlation distances reported in the 3GPP TR 38.901 for frequencies below 100 GHz, the measured correlation distance of shadow fading at 142 GHz (3.8 m) is much shorter than the 10-13 m as specified in 3GPP; the measured correlation distances of delay spread and angular spread at 142 GHz (both 12 m) are comparable to the 7-10 m as specified in 3GPP. This result may guide the development of a statistical spatially consistent channel model for frequencies above 100 GHz in the UMi street canyon environment. Index Terms—Terahertz; Spatial Consistency; Channel Measurement; Channel Modeling; 140 GHz; 142 GHz; 5G; 6Gmore » « less
-
The transmission properties of common building materials, such as glass and red brick, are measured at normal incidence over a range of 4-40 GHz in a modular anechoic chamber using a vector network analyzer. Complex permittivity values are estimated using only transmission S-parameters of the material under test and an air reference measurement. Results suggest that the method provides reasonable estimates of complex permittivity at high microwave and lower mm-wave frequencies.more » « less
