Abstract BackgroundCatheter ablation is associated with limited success rates in patients with persistent atrial fibrillation (AF). Currently, existing mapping systems fail to identify critical target sites for ablation. Recently, we proposed and validated several techniques (multiscale frequency [MSF], Shannon entropy [SE], kurtosis [Kt], and multiscale entropy [MSE]) to identify pivot point of rotors using ex‐vivo optical mapping animal experiments. However, the performance of these techniques is unclear for the clinically recorded intracardiac electrograms (EGMs), due to the different nature of the signals. ObjectiveThis study aims to evaluate the performance of MSF, MSE, SE, and Kt techniques to identify the pivot point of the rotor using unipolar and bipolar EGMs obtained from numerical simulations. MethodsStationary and meandering rotors were simulated in a 2D human atria. The performances of new approaches were quantified by comparing the “true” core of the rotor with the core identified by the techniques. Also, the performances of all techniques were evaluated in the presence of noise, scar, and for the case of the multielectrode multispline and grid catheters. ResultsOur results demonstrate that all the approaches are able to accurately identify the pivot point of both stationary and meandering rotors from both unipolar and bipolar EGMs. The presence of noise and scar tissue did not significantly affect the performance of the techniques. Finally, the core of the rotors was correctly identified for the case of multielectrode multispline and grid catheter simulations. ConclusionThe core of rotors can be successfully identified from EGMs using novel techniques; thus, providing motivation for future clinical implementations.
more »
« less
Image-Decomposition-Enhanced Deep Learning for Detection of Rotor Cores in Cardiac Fibrillation
Objective: Rotors, regions of spiral wave reentry in cardiac tissues, are considered as the drivers of atrial fibrillation (AF), the most common arrhythmia. Whereas physics-based approaches have been widely deployed to detect the rotors, in-depth knowledge in cardiac physiology and electrogram interpretation skills are typically needed. The recent leap forward in smart sensing, data acquisition, and Artificial Intelligence (AI) has offered an unprecedented opportunity to transform diagnosis and treatment in cardiac ailment, including AF. This study aims to develop an image-decomposition-enhanced deep learning framework for automatic identification of rotor cores on both simulation and optical mapping data. Methods: We adopt the Ensemble Empirical Mode Decomposition algorithm (EEMD) to decompose the original image, and the most representative component is then fed into a You-Only-Look-Once (YOLO) object-detection architecture for rotor detection. Simulation data from a bi-domain simulation model and optical mapping acquired from isolated rabbit hearts are used for training and validation. Results: This integrated EEMD-YOLO model achieves high accuracy on both simulation and optical mapping data (precision: 97.2%, 96.8%, recall: 93.8%, 92.2%, and F1 score: 95.5%, 94.4%, respectively). Conclusion: The proposed EEMD-YOLO yields comparable accuracy in rotor detection with the gold standard in literature.
more »
« less
- Award ID(s):
- 2119334
- PAR ID:
- 10548190
- Publisher / Repository:
- IEEE
- Date Published:
- Journal Name:
- IEEE Transactions on Biomedical Engineering
- Volume:
- 71
- Issue:
- 1
- ISSN:
- 0018-9294
- Page Range / eLocation ID:
- 68 to 76
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
Recent advances in computer vision has led to a growth of interest in deploying visual analytics model on mobile devices. However, most mobile devices have limited computing power, which prohibits them from running large scale visual analytics neural networks. An emerging approach to solve this problem is to offload the computation of these neural networks to computing resources at an edge server. Efficient computation offloading requires optimizing the trade-off between multiple objectives including compressed data rate, analytics performance, and computation speed. In this work, we consider a “split computation” system to offload a part of the computation of the YOLO object detection model. We propose a learnable feature compression approach to compress the intermediate YOLO features with lightweight computation. We train the feature compression and decompression module together with the YOLO model to optimize the object detection accuracy under a rate constraint. Compared to baseline methods that apply either standard image compression or learned image compression at the mobile and perform image de-compression and YOLO at the edge, the proposed system achieves higher detection accuracy at the low to medium rate range. Furthermore, the proposed system requires substantially lower computation time on the mobile device with CPU only.more » « less
-
Aerial vehicles with dozens of rotors are becoming increasingly common in important applications such as transportation and construction. One challenge with building such a system is to ensure that the system is robust against faults: as the number of rotors increases, the likelihood of a rotor failing during operation also increases; despite the spare thrust capacity provided by the redundant rotors, a rotor fault can significantly impact the motion and safety of the system. This paper presents an efficient fault detection and isolation (FDI) method for aerial vehicles with a large number of rotors. Our approach relies on two key insights: First, the effect of a faulty rotor directly affects the tracking error in roll and in pitch. This property can be used to order our faulty rotor search space. Second, the error in either roll or pitch is related to both the distance from the (relevant) axis and the severity of a fault. With these observations, we can use probe faults to isolate faulty rotors. Evaluation results show that our technique can efficiently detect and isolate faults in multi-rotor aerial vehicles with up to 64 rotors (8 more rotors than in existing FDI work), and that it can help improve robustness. To the best of our knowledge, our FDI method is the first that scales to several dozens of rotors.more » « less
-
Vertical take-off and landing (VTOL) vehicles are becoming increasingly popular for real-world transport; but, as with any vehicle, guaranteeing safety is both extremely critical and highly challenging due to issues like rotor faults. Existing fault detection and isolation (FDI) techniques usually focus on multirotor systems or fixed wing systems, rather than the hybrid VTOLs. Since VTOLs have both rotors and ailerons, a fault in a rotor may be masked by the (correctly working) ailerons, making it much more difficult to detect faults. However, this masking only works when ailersons are used (e.g., during cruising), leaving the takeoff and landing vulnerable to crashes. This paper presents an online rotor fault detection and isolation (FDI) method for VTOLs. The approach uses pose analysis and aileron command data to quickly and accurately identify the faulty rotor and to compute the severity of the fault. Our method works for hard-to-detect fault scenarios, such as small-severity faults that are masked during cruise flight but not during vertical motion. We evaluated our technique in a SITL PX4 simulation of a modified Deltaquad QuadPlane. The results show that our FDI technique can quickly detect and isolate faults in real time (within 1s-2.5s) and achieve high isolation success rate (91.67%) across six rotors, and that it can estimate the severity of faults to within 2%. When applying a simple recovery process post-isolation, the system consistently achieved safe landing.more » « less
-
null (Ed.)Radio frequency (RF) signal classification has significantly been used for detecting and identifying the features of unknown unmanned aerial vehicles (UAVs). This paper proposes a method using empirical mode decomposition (EMD) and ensemble empirical mode decomposition (EEMD) on extracting the communication channel characteristics of intruding UAVs. The decomposed intrinsic mode functions (IMFs) except noise components are selected for RF signal pattern recognition based on machine learning (ML). The classification results show that the denoising effects introduced by EMD and EEMD could both fit in improving the detection accuracy with different features of RF communication channel, especially on identifying time-varying RF signal sources.more » « less
An official website of the United States government

