skip to main content

Attention:

The NSF Public Access Repository (PAR) system and access will be unavailable from 11:00 PM ET on Thursday, February 13 until 2:00 AM ET on Friday, February 14 due to maintenance. We apologize for the inconvenience.


This content will become publicly available on October 15, 2025

Title: Investigation of experimental parameters in the electric field and mechanical vibration integrated AFM-based nanopatterning on PEDOT
Atomic force microscope (AFM)-based nanomanufacturing offers an affordable and easily deployable method for fabricating high-resolution nanopatterns. This study employs a comprehensive design of experiment (DOE) approach to investigate the effects of various parameters, such as voltage, speed, and vibration axis, on the width and depth of lithography patterns using electrical field and vibration-assisted lithography on PEDOT: PSS films. The DOE explores the effect of voltage and speed on the process of electrical field and vibration-assisted AFM-based nanopatterning in two vibration trajectories: a circular trajectory employing X and Y axis vibration and a reciprocating trajectory employing Y axis vibration. The results indicate that using circular XY-vibration with a low stiffness contact probe and optimized speed and voltage factors results in higher depth and width of the lithography patterns compared to Y-vibration alone at the same parameters as expected. In both cases, pattern width was dominantly controlled by the voltage. Regarding depth, in XY-vibration, the speed of the tip is the most significant factor, while for Y-vibration, voltage plays the most significant role. It is noteworthy that there is a minimum threshold of speed that can produce a pattern; for example, the high-speed level that produced patterns in the circular trajectory (XY-vibration) did not produce patterns in reciprocating motion (Y-vibration). In conclusion, the study demonstrates the significant impact of voltage, speed, and axis on the width and depth of the lithography patterns. These findings can be instrumental in developing and understanding AFM-based high-resolution nanofabrication techniques.  more » « less
Award ID(s):
2006127
PAR ID:
10548856
Author(s) / Creator(s):
; ; ;
Publisher / Repository:
Elsevier
Date Published:
Journal Name:
Manufacturing Letters
Volume:
41
Issue:
S
ISSN:
2213-8463
Page Range / eLocation ID:
546 to 557
Subject(s) / Keyword(s):
Atomic force microscope Nanomanufacturing Nanopatterning Lithography Electric field Vibration
Format(s):
Medium: X
Sponsoring Org:
National Science Foundation
More Like this
  1. The vibration-assisted atomic force microscope (AFM)-based nanomachining offers a promising opportunity for low-cost nanofabrication with high tunability. However, critical challenges reside in advancing the throughput and the quality assurance of the process due to extensive offline experimental investigations and characterizations, which in turn hinders the wide industry applications of current AFM-based nanomachining process. Hence, it is necessary to create an in-process monitoring for the nanomachining to allow real-time inspection and process characterizations. This paper reports a sensor-based analytic approach to allow real-time estimations of the AFM-based nanomachining process. The temporal-spectral features of collected acoustic emission (AE) sensor signals are applied to predict the depth morphology of nanomachined trenches under different machining conditions. The experimental case study suggests that the most significant frequency domain information from AE sensor can accurately predict (R-squared value around 92%) the nanomachined depth profile. It, therefore, breaks the current limitation of characterization tools at the nanoscale precision level, and opens up an opportunity to allow real-time estimation for quality inspection of vibration-assisted AFM-based nanofabrication process. 
    more » « less
  2. Abstract Atomic force microscope (AFM)-based nanolithography is a cost-effective nanopatterning technique that can fabricate nanostructures with arbitrary shapes. However, existing AFM-based nanopatterning approaches have limitations in the patterning resolution and efficiency. Minimum feature size and machining performance in the mechanical force-induced nanofabrication process are limited by the radius and sharpness of the AFM tip. Electric-field-assisted atomic force microscope (E-AFM) nanolithography can fabricate nanopatterns with features smaller than the tip radius, but it is very challenging to find the appropriate input parameter window. The tip bias range in E-AFM process is typically very small and varies for each AFM tip due to the variations in tip geometry, tip end diameter, and tip conductive coating thickness. This paper demonstrates a novel electric-field and mechanical vibration-assisted AFM-based nanofabrication approach, which enables high-resolution (sub-10 nm toward sub-5 nm) and high-efficiency nanopatterning processes. The integration of in-plane vibration with the electric field increases the patterning speed, broadens the selectable ranges of applied voltages, and reduces the minimum tip bias required for nanopatterning as compared with E-AFM process, which significantly increases the versatility and capability of AFM-based nanopatterning and effectively avoids the tip damage. 
    more » « less
  3. Abstract Electric-field-assisted atomic force microscope (E-AFM) nanolithography is a novel polymer-patterning technique that has diverse applications. E-AFM uses a biased AFM tip with conductive coatings to make patterns with little probe-sample interaction, which thereby avoids the tip wear that is a major issue for contact-mode AFM-based lithography, which usually requires a high probe-sample contact force to fabricate nanopatterns; however, the relatively large tip radius and large tip-sample separation limit its capacity to fabricate high-resolution nanopatterns. In this paper, we developed a contact mode E-AFM nanolithography approach to achieve high-resolution nanolithography of poly (methyl methacrylate) (PMMA) using a conductive AFM probe with a low stiffness (~0.16 N/m). The nanolithography process generates features by biasing the AFM probe across a thin polymer film on a metal substrate. A small constant force (0.5-1 nN) applied on the AFM tip helps engage the tip-film contact, which enhances nanomachining resolution. This E-AFM nanolithography approach enables high-resolution nanopatterning with feature width down to ~16 nm, which is less than one half of the nominal tip radius of the employed conductive AFM probes. 
    more » « less
  4. Lakhtakia, Akhlesh ; Bukkapatnam, Satish T. (Ed.)
    The atomic force microscope (AFM)-based nanomachining has the potential for highly customized nanofabrication due to its low cost and tunability. However, the low productivity and issues related to the quality assurance for AFM-based nanomachining impede it from large-scale production due to the extensive experimental study for turning process parameters with time-consuming offline characterizations. This work reports an analytic approach to capturing the AE spectral frequency responses from the nanopatterning process using vibration-assisted AFM-based nanomachining. The experimental case study suggests the presented approach allows characterizations of subtle variations on the AE frequency responses during the nanomachining processes (with overall 93% accuracy), which opens up the chance to explain the variations of the nano-dynamics using the senor-based monitoring approach for vibration-assisted AFM-based nanomachining. 
    more » « less
  5. Vibration-assisted atomic force microscopy (AFM)-based nanomachining is a promising method for the fabrication of nanostructures. During mechanical nanomachining, the geometry of the tooltip and workpiece interface is sensitive to variations in the depth of cut, the material grain size, and system vibrations; understanding the underlying uncertainties is essential to improve the process capability. This paper investigates process uncertainties and their impacts on the achieved surface geometries based on an experimental study of AFM-based nanomachining. The variations and biases of the achieved surface characteristics (compared to the theoretical geometries) are observed and identified as the torsional deflections on the AFM probe. A physical-based model combined with the Kriging method is reported to capture such uncertainties and estimate the surface finish based on different process parameters. 
    more » « less