skip to main content
US FlagAn official website of the United States government
dot gov icon
Official websites use .gov
A .gov website belongs to an official government organization in the United States.
https lock icon
Secure .gov websites use HTTPS
A lock ( lock ) or https:// means you've safely connected to the .gov website. Share sensitive information only on official, secure websites.

Explore Research Products in the PAR
It may take a few hours for recently added research products to appear in PAR search results.


  • NSF Public Access
  • Search Results
  • Evaluation of a Porous Membrane as a Mass-Transfer Efficient Structure for the Adsorption of Per- and Polyfluoroalkyl Substances from Drinking Water
Title: Evaluation of a Porous Membrane as a Mass-Transfer Efficient Structure for the Adsorption of Per- and Polyfluoroalkyl Substances from Drinking Water
With drinking water regulations forthcoming for per- and polyfluoroalkyl substances (PFAS), the need for cost-effective treatment technologies has become urgent. Adsorption is a key process for removing or concentrating PFAS from water; however, conventional adsorbents operated in packed beds suffer from mass transfer limitations. The objective of this study was to assess the mass transfer performance of a porous polyamide adsorptive membrane for removing PFAS from drinking water under varying conditions. We conducted batch equilibrium and dynamic adsorption experiments for perfluorooctanesulfonic acid, perfluorooctanoic acid, perfluorobutanesulfonic acid, and undecafluoro-2-methyl-3-oxahexanoic acid (i.e., GenX). We assessed various operating and water quality parameters, including flow rate (pore velocity), pH, ionic strength (IS), and presence of dissolved organic carbon. Outcomes revealed that the porous adsorptive membrane was a mass transfer-efficient platform capable of achieving dynamic capacities similar to equilibrium capacities at fast interstitial velocities. The adsorption mechanism of PFAS to the membrane was a mixture of electrostatic and hydrophobic interactions, with pH and IS controlling which interaction was dominant. The adsorption capacity of the membrane was limited by its surface area, but its site density was approximately five times higher than that of granular activated carbon. With advances in molecular engineering to increase the capacity, porous adsorptive membranes are well suited as alternative adsorbent platforms for removing PFAS from drinking water.  more » « less
Award ID(s):
1847466
PAR ID:
10550425
Author(s) / Creator(s):
; ; ; ; ; ;
Publisher / Repository:
ACS
Date Published:
Journal Name:
ACS ES&T Engineering
Volume:
4
Issue:
5
ISSN:
2690-0645
Page Range / eLocation ID:
995 to 1006
Format(s):
Medium: X
Sponsoring Org:
National Science Foundation
More Like this
  1. ; ; ; ; ; (, Journal of Separation Science)
    The ubiquitous presence and persistence of per‐ and polyfluoroalkyl substances (PFAS) in the environment have raised concerns in the scientific community. Current research efforts are prioritizing effective PFAS remediation through novel sorbents with orthogonal interaction mechanisms. Recognized sorption mechanisms between PFAS and sorbents include hydrophobic, electrostatic, and fluorine‐fluorine interaction. The interplay of these mechanisms contributes significantly to improved sorption capacity and selectivity in PFAS separations. In this study, a primary/secondary amine‐functionalized polystyrene‐divinylbenzene (Sepra‐WAX) polymer was modified to create a fluorinated WAX resin (Sepra‐WAX‐KelF‐PEI). The synthesis intermediate (Sepra‐WAX‐KelF) was also tested to assess the improvement of the final product (Sepra‐WAX‐KelF‐PEI). The adsorption capacity of Sepra‐WAX, Sepra‐WAX‐KelF, and Sepra‐WAX‐KelF‐PEI, and their interactions with PFAS were evaluated. The effect of pH, ionic strength, and organic solvents on PFAS sorption in aqueous solution was also investigated. The sorbents showed varied adsorption capacities for perfluorooctanoic acid, perfluoropentanoic acid, perfluoro‐n‐decanoic acid, and hexafluoropropylene oxide dimer acid, with the average extraction capacity of the four analytes being Sepra‐WAX‐KelF‐PEI (523 mg/g) > Sepra‐WAX (353 mg/g) > Sepra‐WAX‐KelF (220 mg/g). Sepra‐WAX‐KelF‐PEI provided the highest adsorption capacity for all analytes tested, proving that the combination of electrostatic and hydrophobic/fluorophilic interactions is crucial for the effective preconcentration of PFAS and its future applications for PFAS remediation from aqueous solutions. 
    more » « less
  2. ; ; ; ; ; ; (, SSRN Electronic Journal)
    “Concentrate-and-degrade” is an effective strategy to promote mass transfer and degradation of pollutants in photocatalytic systems, yet suitable and cost-effective photocatalysts are required to practice the new concept. In this study, we doped a post-transition metal of Indium (In) on a novel composite adsorptive photocatalyst, activated carbon-supported titanate nanotubes (TNTs@AC), to effectively degrade perfluorooctanoic acid (PFOA). In/TNTs@AC exhibited both excellent PFOA adsorption (>99% in 30 min) and photodegradation (>99% in 4 h) under optimal conditions (25 °C, pH 7, 1 atm, 1 g/L catalyst, 0.1 mg/L PFOA, 254 nm). The heterojunction structure of the composite facilitated a cooperative adsorption mode of PFOA, i.e., binding of the carboxylic head group of PFOA to the metal oxide and attachment of the hydrophobic tail to AC. The resulting side-on adsorption mode facilitates the electron (e‒) transfer from the carboxylic head to the photogenerated hole (h+), which was the major oxidant verified by scavenger tests. Furthermore, the presence of In enables direct electron transfer and facilitates the subsequent stepwise defluorination. Finally, In/TNTs@AC was amenable to repeated uses in four consecutive adsorption-photodegradation runs. The findings showed that adsorptive photocatalysts can be prepared by hybridization of carbon and photoactive semiconductors and the enabled “concentrate-and-degrade” strategy is promising for the removal and degradation of trace levels of PFOA from polluted waters. 
    more » « less
  3. ; ; ; (, RSC Advances)
    Per- and polyfluoroalkyl substances (PFAS) have been extensively utilized in practical applications that include surfactants, lubricants, and firefighting foams due to their thermal stability and chemical inertness. Recent studies have revealed that PFAS were detected in groundwater and even drinking water systems which can cause severe environmental and health issues. While adsorbents with a large specific surface area have demonstrated effective removal of PFAS from water, their capability in desorbing the retained PFAS has been often neglected despite its critical role in regeneration for reuse. Further, they have demonstrated a relatively lower adsorption capacity for PFAS with a short fluoroalkyl chain length. To overcome these limitations, electric field-aided adsorption has been explored. In this work, reversible adsorption and desorption of PFAS dissolved in water upon alternating voltage is reported. An inexpensive graphite adsorbent is fabricated by using a simple press resulting in a mesoporous structure with a BET surface area of 132.9 ± 10.0 m 2 g −1 . Electric field-aided adsorption and desorption experiments are conducted by using a custom-made cell consisting of two graphite electrodes placed in parallel in a polydimethylsiloxane container. Unlike the conventional sorption process, a graphite electrode exhibits a higher adsorption capacity for PFAS with a short fluoroalkyl chain (perfluoropentanoic acid, PFPA) in comparison to that with a long fluoroalkyl chain (perfluorooctanoic acid, PFOA). Upon alternating the voltage to a negative value, the retained PFPA or PFOA is released into the surrounding water. Finally, we engineered a device module mounted on a gravity-assisted apparatus to demonstrate electrosorption of PFAS and collection of high purity water. 
    more » « less
  4. ; ; ; (, Environmental Science: Nano)
    Based on tunable properties, engineered nanoparticles (NPs) hold significant promise for water treatment technologies. Motivated by concerns regarding toxicity and non-biodegradability of some nanoparticles, we explored engineered magnetite (Fe 3 O 4 ) nanoparticles with a biocompatible coating. These were prepared with a coating of rhamnolipid, a biosurfactant primarily obtained from Pseudomonas aeruginosa . By optimizing synthesis and phase transfer conditions, particles were observed to be monodispersed and stable in water under environmentally relevant pH and ionic strength values. These materials were evaluated for U( vi ) removal from water at varying dissolved inorganic carbon and pH conditions. The rhamnolipid-coated iron oxide nanoparticles (IONPs) showed high sorption capacities at pH 6 and pH 8 in both carbonate-free systems and systems in equilibrium with atmospheric CO 2 . Equilibrium sorption behavior was interpreted using surface complexation modeling (SCM). Two models (diffuse double layer and non-electrostatic) were evaluated for their ability to account for U( vi ) binding to the carboxyl groups of the rhamnolipid coating as a function of the pH, total U( vi ) loading, and dissolved inorganic carbon concentration. The diffuse double layer model provided the best simulation of the adsorption data and was sensitive to U( vi ) loadings as it accounted for the change in the surface charge associated with U( vi ) adsorption. 
    more » « less
  5. ; ; ; ; ; ; (, ACS Applied Polymer Materials)
    null (Ed.)
    Energy-efficient adsorptive CO2 capture requires both adsorbent materials with high CO2 capacity and structured adsorption contactors possessing fast mass transfer kinetics and low pressure drop. The state-of-the-art research primarily focuses on “hard” adsorbents such as mesoporous zeolites and metal–organic frameworks, which exhibit high CO2 capacities but are challenging to translate into structured contactors. Polymer of intrinsic microporosity 1 (PIM-1), a solution-processable microporous polymer, is a “softer” alternative that can be easily fabricated into structured adsorption contactors. In prior research, PIM-1 has been utilized as a “molecular basket” for poly(ethylene imine) (PEI). Despite nanoscale amine dispersion and excellent processability, PEI/PIM-1 composites possess an unstable micropore structure, which collapses at high PEI loadings (∼30%) and results in lower CO2 adsorption capacity than PEI-loaded hard oxides. Here, we applied a post-fabrication polymer stabilization method, vapor phase infiltration (VPI), to improve the CO2 capacity of the PEI/PIM-1 composite without sacrificing its processibility. PIM-1 is fabricated into structured adsorption contactors and then reinforced with amorphous aluminum oxyhydroxide (AlOx) nanostrands via VPI. The resulting AlOx/PIM-1 is a stable, hierarchically porous support, which can be loaded with 40% PEI without pore collapse. Owing to the combination of processibility, comparable CO2 capacity, and high amine efficiency, PEI/AlOx/PIM-1 composites are a promising alternative to PEI-loaded mesoporous oxides. 
    more » « less
  • Citation Formats
  • MLA
  • APA
  • Chicago
  • BibTeX
  • Save / Share this Record
  • Send to Email