Lifting line theory describes the cumulative effect of shed vorticity from finite span lifting surfaces. In this work, the theory is reformulated to improve the accuracy of the actuator line model (ALM). This model is a computational tool used to represent lifting surfaces, such as wind-turbine blades in computational fluid dynamics. In ALM, blade segments are represented by means of a Gaussian body force distribution with a prescribed kernel size. Prior analysis has shown that a representation of the blade using an optimal kernel width $\unicode[STIX]{x1D716}^{opt}$ of approximately one quarter of the chord size results in accurate predictions of the velocity field and loads along the blades. Also, simulations have shown that use of the optimal kernel size yields accurate representation of the tip-vortex size and the associated downwash resulting in accurate predictions of the tip losses. In this work, we address the issue of how to represent the effects of finite span wings and tip vortices when using Gaussian body forces with a kernel size larger than the optimal value. This question is relevant in the context of coarse-scale large-eddy simulations that cannot afford the fine resolutions required to resolve the optimal kernel size. For this purpose, we present a filtered lifting line theory for a Gaussian force distribution. Based on the streamwise component of the vorticity transport equation, we develop an analytical model for the induced velocity resulting from the spanwise changes in lift force for an arbitrary kernel scale. The results are used to derive a subfilter-scale velocity model that is used to correct the velocity along the blade when using kernel sizes larger than $\unicode[STIX]{x1D716}^{opt}$ . Tests are performed in large-eddy simulation of flow over fixed wings with constant and elliptic chord distributions using various kernel sizes. Results show that by using the proposed subfilter velocity model, kernel-size independent predictions of lift coefficient and total lift forces agree with those obtained with the optimal kernel size.
more »
« less
This content will become publicly available on July 18, 2025
Line tension and line entropy associated with the monolayer/trilayer boundary of smectic liquid crystal at the air-water interface
- Award ID(s):
- 1709985
- PAR ID:
- 10551097
- Publisher / Repository:
- American Physical Society
- Date Published:
- Journal Name:
- Physical Review E
- Volume:
- 110
- Issue:
- 1
- ISSN:
- 2470-0045; PLEEE8
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
more » « less
Abstract Broad absorption line quasars are actively accreting supermassive black holes that have strong outflows characterized by broad absorption lines in their rest-UV spectra. Variability in these absorption lines occurs over months to years depending on the source. WPVS 007, a low-redshift, low-luminosity narrow-line Seyfert 1 (NLS1) shows strong variability over shorter timescales, providing a unique opportunity to study the driving mechanism behind this variability that may mimic longer-scale variability in much more massive quasars. We present the first variability study using the spectral synthesis code
SimBAL , which provides velocity-resolved changes in physical conditions of the gas using constraints from multiple absorption lines. Overall, we find WPVS 007 to have a highly ionized outflow with a large mass-loss rate and kinetic luminosity. We determine the primary cause of the absorption-line variability in WPVS 007 to be a change in covering fraction of the continuum by the outflow. This study is the firstSimBAL analysis where multiple epochs of observation were fit simultaneously, demonstrating the ability ofSimBAL to use the time domain as an additional constraint in spectral models. -
more » « less
Abstract A compact source, G0.02467–0.0727, was detected in Atacama Large Millimeter/submillimeter Array 3 mm observations in continuum and very broad line emission. The continuum emission has a spectral index
α ≈ 3.3, suggesting that the emission is from dust. The line emission is detected in several transitions of CS, SO, and SO2and exhibits a line width FWHM ≈ 160 km s−1. The line profile appears Gaussian. The emission is weakly spatially resolved, coming from an area on the sky ≲1″ in diameter (≲104au at the distance of the Galactic center, GC). The centroid velocity isv LSR≈ 40–50 km s−1, which is consistent with a location in the GC. With multiple SO lines detected, and assuming local thermodynamic equilibrium (LTE) conditions, the gas temperature isT LTE= 13 K, which is colder than seen in typical GC clouds, though we cannot rule out low-density, subthermally excited, warmer gas. Despite the high velocity dispersion, no emission is observed from SiO, suggesting that there are no strong (≳10 km s−1) shocks in the molecular gas. There are no detections at other wavelengths, including X-ray, infrared, and radio. We consider several explanations for the millimeter ultra-broad-line object (MUBLO), including protostellar outflow, explosive outflow, a collapsing cloud, an evolved star, a stellar merger, a high-velocity compact cloud, an intermediate-mass black hole, and a background galaxy. Most of these conceptual models are either inconsistent with the data or do not fully explain them. The MUBLO is, at present, an observationally unique object. -
more » « less
Abstract We study a new geometric bootstrap percolation model,
line percolation , on thed ‐dimensional integer grid. In line percolation with infection parameter r , infection spreads from a subsetof initially infected lattice points as follows: if there exists an axis‐parallel line L withr or more infected lattice points on it, then every lattice point ofon L gets infected, and we repeat this until the infection can no longer spread. The elements of the setA are usually chosen independently, with some densityp , and the main question is to determine, the density at which percolation (infection of the entire grid) becomes likely. In this paper, we determine up to a multiplicative factor of and up to a multiplicative constant as for every fixed . We also determine the size of the minimal percolating sets in all dimensions and for all values of the infection parameter.
