An official website of the United States government
Characterization of paste flow is important in ensuring rheological control during printing. The interaction between the rheological characteristics and processing parameters are better studied through a combination of experimental and simulation tools. For fresh pastes and concrete, discrete element method (DEM)-based simulations are appropriate to provide insights into the particle scale processes occurring during extrusion-based printing, and to relate them to the macro-scale response of the entire system. In this paper, we model the extrusion process of a plain ordinary Portland cement (OPC) paste using DEM, and outline the methodology adopted to evaluate the linkage between particle scale processes and extrusion process. An analytical model for a frictional plastic material undergoing ram extrusion is also used in conjunction with the DEM model to arrive at the yield stresses and shaping stresses that enable efficient extrusion process, as a function of the material microstructure.
more »
« less
Effect of material extrusion additive manufacturing process parameters on cross-sectional geometry, fracture behavior, and mechanical properties for polycarbonate
Material extrusion additive manufacturing of polycarbonate, including tensile properties, cross-sectional microscopy, and fracture surfaces for single road width boxes printed with different print speeds, layer times, and extrusion temperatures.
more »
« less
- Award ID(s):
- 1914651
- PAR ID:
- 10552503
- Publisher / Repository:
- Materials Data Facility
- Date Published:
- Subject(s) / Keyword(s):
- experiment polymers microscopy
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
Abstract Cementitious binders amenable to extrusion‐based 3D printing are formulated by tailoring the fresh microstructure through the use of fine limestone powder or a combination of limestone powder and microsilica or metakaolin. Mixtures are proportioned with and without a superplasticizer to enable different particle packings at similar printability levels. A simple microstructural parameter, which implicitly accounts for the solid volume and inverse square dependence of particle size on yield stress can be used to select preliminary material combinations for printable binders. The influence of composition/microstructure on the response of pastes to extension or squeezing are also brought out. Extrusion rheology is used in conjunction with a phenomenological model to better understand the properties of significance in extrusion‐based printing of cementitious materials. The extrusion yield stress and die wall slip shear stress extracted from the model enables an understanding of their relationships with the fresh paste microstructure, which are crucial in selecting binders, extrusion geometry, and processing parameters for 3D printing.more » « less
-
Abstract BackgroundInhomogeneous patterns of chromatin-chromatin contacts within 10–100-kb-sized regions of the genome are a generic feature of chromatin spatial organization. These features, termed topologically associating domains (TADs), have led to the loop extrusion factor (LEF) model. Currently, our ability to model TADs relies on the observation that in vertebrates TAD boundaries are correlated with DNA sequences that bind CTCF, which therefore is inferred to block loop extrusion. However, although TADs feature prominently in their Hi-C maps, non-vertebrate eukaryotes either do not express CTCF or show few TAD boundaries that correlate with CTCF sites. In all of these organisms, the counterparts of CTCF remain unknown, frustrating comparisons between Hi-C data and simulations. ResultsTo extend the LEF model across the tree of life, here, we propose theconserved-current loop extrusion (CCLE) modelthat interprets loop-extruding cohesin as a nearly conserved probability current. From cohesin ChIP-seq data alone, we derive a position-dependent loop extrusion rate, allowing for a modified paradigm for loop extrusion, that goes beyond solely localized barriers to also include loop extrusion rates that vary continuously. We show that CCLE accurately predicts the TAD-scale Hi-C maps of interphaseSchizosaccharomyces pombe, as well as those of meiotic and mitoticSaccharomyces cerevisiae, demonstrating its utility in organisms lacking CTCF. ConclusionsThe success of CCLE in yeasts suggests that loop extrusion by cohesin is indeed the primary mechanism underlying TADs in these systems. CCLE allows us to obtain loop extrusion parameters such as the LEF density and processivity, which compare well to independent estimates.more » « less
-
The present work mainly investigated the effect of extrusion temperatures on the microstructure and mechanical properties of Mg-1.3Zn-0.5Ca (wt.%) alloys. The alloys were subjected to extrusion at 300 °C, 350 °C, and 400 °C with an extrusion ratio of 9.37. The results demonstrated that both the average size and volume fraction of dynamic recrystallized (DRXed) grains increased with increasing extrusion temperature (DRXed fractions of 0.43, 0.61, and 0.97 for 300 °C, 350 °C, and 400 °C, respectively). Moreover, the as-extruded alloys exhibited a typical basal fiber texture. The alloy extruded at 300 °C had a microstructure composed of fine DRXed grains of ~1.54 µm and strongly textured elongated unDRXed grains. It also had an ultimate tensile strength (UTS) of 355 MPa, tensile yield strength (TYS) of 284 MPa, and an elongation (EL) of 5.7%. In contrast, after extrusion at 400 °C, the microstructure was almost completely DRXed with a greatly weakened texture, resulting in an improved EL of 15.1% and UTS of 274 MPa, TYS of 220 MPa. At the intermediate temperature of 350 °C, the alloy had a UTS of 298 MPa, TYS of 234 MPa, and EL of 12.8%.more » « less
-
Robotic Materials are materials that have sensing, computation and, possibly actuation, distributed throughout the bulk of the material. In such a material, we envision semiconducting polymer based sensing, actuation, and information processing for on-board decision making to be designed, in tandem, with the smart product that will be implemented with the smart material. Prior work in printing polymer semiconductors for sensing and cognition have focused on highly energetic inkjet printing. Alternatively, we are developing liquid polymer extrusion processes to work hand-in-hand with existing solid polymer extrusion processes (such as Fused Deposition Manufacturing - FDM) to simultaneously deposit sensing, computation, actuation and structure. We demonstrate the successful extrusion printing of conductors and capacitors to impedance-match a new, higher-performance organic transistor design that solves the cascading problem of the device previously reported and is more amenable to liquid extrusion printing. Consequently, these printed devices are integrated into a sheet material that is folded into a 3-D, six-legged walking machine with attached electric motor.more » « less
