An official website of the United States government
Clarifying the correlation between the chemical structure of mechanophores and their mechanical reactivity informs the design of mechanochemical systems. One specific correlation that has received much recent attention is that between stereoisomerism and mechanical reactivity. Here, we report previously unobserved differences in the mechanical reactivity of furan–maleimide Diels–Alder (DA) stereoisomers. We evaluated the internal competition between the mechanically triggered retro-DA reaction and the mechanochemical ring opening of gem -dichlorocyclopropane mechanophores in the pulsed sonication of polymer solutions. The relative extent of the two sonomechanochemical reactions in the same polymer shows that the endo DA isomer exhibits greater mechanical lability than its exo isomer. This result contrasts with recent measurements of the relative rates of scission in a similar system and points to potential enhanced sensitivity obtained through the use of internal competition as opposed to absolute rates in assessing mechanical reactivity in sonication studies.
more »
« less
This content will become publicly available on November 7, 2025
Stereochemical Shape Morphing in Diels‐Alder Polymer Networks
Abstract The intrinsic reversibility of dynamic covalent bonding, such as the furan‐maleimide Diels‐Alder (DA) cycloaddition reactions, enables reprocessable, self‐healing polymer materials that can be reconfigured via the mechanism of solid‐state plasticity. In this work, the temperature‐dependent exchange rates of stereochemically distinctendoandexoDA bonds are leveraged to achieve tunable, temperature‐ and stress‐activated shape morphing in Diels‐Alder polymer (DAP) networks. Through thermal annealing, ≈35% ofendoDA isomers are converted in neat DAP networks to the thermodynamically favoredexoform, achieving ≈97%exoafter complete annealing at 60 °C. This conversion results in a ≈1.7 fold increase in elastic modulus, from 1.7 to 3.0 MPa, and significantly alters the stress relaxation and shape recovery behavior. Spatially resolved annealing, is further showcased enabling the precise control of spatial distributions ofendoandexoDA bonds across planar geometries. The locally distinct concentrations ofendo/exoisomers, achieved by temperature‐induced conversion ofendoDA isomers to the thermodynamically stableexoDA isomers, gave rise to the spatial distributions of stress relaxation rates and elastic strain recovery mismatch to enable controlled stereochemical shape morphing. This approach provides a simplified, thermally driven method for shape morphing, with potential applications in soft robotics and flexible electronics.
more »
« less
- Award ID(s):
- 2406256
- PAR ID:
- 10554189
- Publisher / Repository:
- Wiley Blackwell (John Wiley & Sons)
- Date Published:
- Journal Name:
- Small
- ISSN:
- 1613-6810
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
Coupling molecules to a quantized radiation field inside an optical cavity has shown great promise in modifying chemical reactivity. It was recently proposed that strong light-matter interactions are able to differentiate endo/exo products of a Diels-Alder reaction at the transition state. Using the recently developed parameterized quantum electrodynamic \textit{ab initio} polariton chemistry approach along with time-dependent density functional theory, we theoretically confirm that the ground state selectivity of a Diels-Alder reaction can be fundamentally changed by strongly coupling to the cavity, generating preferential endo or exo isomers which are formed with equal probability for the same reaction outside the cavity. This provides an important and necessary benchmark with the high-level self-consistent QED coupled cluster approach. In addition, by computing the ground state difference density, we show that the cavity induces a redistribution of electron density from intramolecular $$\pi$$-bonding orbitals to intermolecular bonding orbitals, thus providing chemically relavent description of the cavity-induced changes to the ground state chemistry and thus changes to the molecular orbital theory inside the cavity. We extend this exploration to an arbitrary cavity polarization vector which leads to critical polarization angles that maximize the endo=/exo selectivity of the reaction. Finally, we decompose the energy contributions from the Hamiltonian and provide discussion relating to the dominent dipole self-energy effects on the ground state.more » « less
-
null (Ed.)A one pot synthesis is applied to control the chain structure and architecture of multiply dynamic polymers, enabling fine tuning of materials properties by choice of polymer chain length or crosslink density. Macromolecules containing both non-covalent linkers based on quadruple hydrogen-bonded 2-(((6-(3-(6-methyl-4-oxo-1,4-dihydropyrimidin-2-yl)ureido)hexyl)carbamoyl)oxy)ethyl methacrylate (UPyMA), and thermoresponsive dynamic covalent furan–maleimide based Diels–Alder linkers are explored. The primary polymer's architecture was controlled by reversible addition-fragmentation chain transfer (RAFT) polymerization, with the dynamic non-covalent (UPyMA) and dynamic covalent furfuryl methacrylate (FMA) units incorporated into the same backbone. The materials are crosslinked, taking advantage of the “click” chemistry properties of the furan–maleimide reaction. The polymer materials showed stimulus-responsive thermomechanical properties with a decrosslinking temperature increasing with the polymer's primary chain length and crosslink density. The polymers had good thermally promoted self-healing properties due to the dynamic covalent Diels–Alder bonds. Besides, the materials had excellent stress relaxation characteristics induced by the exchange of the hydrogen bonds in UPyMA units.more » « less
-
Integration of multiple types of dynamic linkages into one polymer network is challenging and not well understood especially in the design and fabrication of dynamic polymer nanocomposites (DPNs). In this contribution, we present facile methods for synthesizing flexible, healable, conductive, and recyclable thermoresponsive DPNs using three dynamic chemistries playing distinct roles. Dynamic hydrogen bonds account for material flexibility and recycling character. Thiol-Michael exchange accounts for thermoresponsive properties. Diels–Alder reaction leads to covalent bonding between polymer matrix and nanocomposite. Overall, the presence of multiple types of orthogonal dynamic bonds provided a solution to the trade-off between enhanced mechanical performance and material elongation in DPNs. Efficient reinforcement was achieved using <1 wt % multiwalled carbon nanotubes as nanocomposite. Resulting DPNs showed excellent healability with over 3 MPa increase in stress compared to unreinforced materials. Due to multiple responsive dynamic linkages, >90% stress–relaxation was observed with self-healing achieved within 1 h of healing time. Increased mechanical strength, electrical conductivity, and reprocessability were achieved all while maintaining material flexibility and extensibility, hence highlighting the strong promise of these DPNs in the rapidly growing fields of flexible compliant electrodes and strain sensors.more » « less
-
Recent progress on stretchable, tough dual-dynamic polymer single networks (SN) and interpenetrated networks (IPN) has broadened the potential applications of dynamic polymers. However, the impact of macromolecular structure on the material mechanics remains poorly understood. Here, rapidly exchanging hydrogen bonds and thermoresponsive Diels–Alder bonds were included into molecularly engineered interpenetrated network materials. RAFT polymerization was used to make well-defined polymers with control over macromolecular architecture. The IPN materials were assessed by gel permeation chromatography, differential scanning calorimetry, tensile testing and rheology. The mechanical properties of these IPN materials can be tuned by varying the crosslinker content and chain length. All materials are elastic and have dynamic behavior at both ambient temperature and elevated temperature (90 °C), owing to the presence of the dual dynamic noncovalent and covalent bonds. 100% self-healing recovery was achieved and a maximum stress level of up to 6 MPa was obtained. The data suggested the material's healing properties are inversely proportional to the content of the crosslinker or the degree of polymerization at both room and elevated temperature. The thermoresponsive crosslinker restricted deformation to some extent in an ambient environment but gave excellent malleability upon heating. The underlying mechanism was explored by the computational simulations. Furthermore, a single network material with the same crosslinker content and degree of polymerization as the IPN was made. The SN was substantially weaker than the comparable IPN material.more » « less
