An official website of the United States government
Surface wrinkling provides an approach to fabricate micron and sub-micron-level biomaterial topographies that can mimic features of the dynamic, in vivo cell environment and guide cell adhesion, alignment, and differentiation. Most wrinkling research to date has used planar, two-dimensional (2D) substrates, and wrinkling work on three-dimensional (3D) structures has been limited. To enable wrinkle formation on architecturally complex, biomimetic 3D structures, here, we report a simple, low-cost experimental wrinkling approach that combines natural silk fibroin films with a recently developed advanced manufacturing technique for programming strain in complex 3D shape–memory polymer (SMP) scaffolds. By systematically investigating the influence of SMP programmed strain magnitude, silk film thickness, and aqueous media on wrinkle morphology and stability, we reveal how to generate and tune silk wrinkles on the micron and sub-micron scale. We find that increasing SMP programmed strain magnitude increases wavelength and decreases amplitudes of silk wrinkled topographies, while increasing silk film thickness increases wavelength and amplitude. Silk wrinkles persist after 24 h in cell culture medium. Wrinkled topographies demonstrate high cell viability and attachment. These findings suggest the potential for fabricating biomimetic cellular microenvironments that can advance understanding and control of cell–material interactions in engineering tissue constructs.
more »
« less
Bacterial Response to Shape‐Memory Actuated Silk Wrinkled Surface Topographies as a Strategy for Biofilm Prevention
Abstract Bacterial biofilms on the surfaces of indwelling biomedical devices can cause long‐term infection and patient morbidity and mortality. Wrinkled surface topographies have previously demonstrated promising antifouling properties. Here we report a bioinspired strategy in which the actuation of silk fibroin produces tunable, wrinkled surface topographies on 2D shape memory polymer (SMP) substrates and investigate the influence of these topographies on biofilm formation. To mimic biofilm‐associated infections related to the geometries of indwelling medical devices, silk wrinkles are produced on complex, 3D SMP architectures, and biofilm formation is evaluated. Using common biofilm‐causing agents, smaller silk wrinkle wavelengths and amplitudes are found to significantly reduce biofilm formation, resulting in primarily isolated, single‐cell bacteria on the 2D wrinkled surfaces. These single‐cell bacteria are nearly completely eradicated by treatment with antibiotics, which are ineffective against control surfaces. Antibiotics are also physically incorporated into the 2D wrinkled surfaces, which resulted in a further significant reduction in bacterial adhesion. Lastly, silk wrinkled topographies are successfully applied on 3D architectures, and the wrinkled surfaces display a significant reduction in biofilm coverage compared to controls. The findings demonstrate the potential for biopolymer wrinkles on biomaterials to be used as antifouling surfaces for biofilm prevention.
more »
« less
- Award ID(s):
- 2022421
- PAR ID:
- 10554232
- Publisher / Repository:
- Wiley Blackwell (John Wiley & Sons)
- Date Published:
- Journal Name:
- Advanced Materials Interfaces
- Volume:
- 12
- Issue:
- 6
- ISSN:
- 2196-7350
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
ABSTRACT Peripheral nerve injuries (PNIs) resulting in myelin breakdown and axonal degeneration at both the proximal and distal nerve stumps are major clinical concerns that can induce functional loss and diminished quality of life. In biomaterials science, considerable attention has been given to artificial nerve guidance conduits (NGCs), since the engineered tubular structures have the potential to supply a supportive nerve microenvironment to longitudinally align the regenerating axons for bridging the injured nerve sites. Although NGCs may become promising alternatives to nerve autografts, the fabrication approaches available to incorporate directional cues for dictating neuronal behavior and nerve reconnection have been limited to conventional micro/nano‐fabrication techniques that are complex and time‐consuming due to manual processing steps. Thus, our goal here was to develop a simple manufacturing approach for introducing topographical cues onto NGCs. To achieve this goal, we used an established mechanically actuated silk wrinkling approach to create topographically functionalized surfaces as a potential NGC material platform for guided directional alignment of neurons. We 3D‐printed thermo‐responsive shape‐memory polymer (SMP)‐based NGCs that can produce silk fibroin (SF)‐wrinkled topographies on the micro and nano‐meter length scale. Since SF is a commonly used biomaterial surface coating with excellent neuro‐compatibility, we studied the ability to develop NGCs that can autonomously actuate silk wrinkles upon heat‐induced contraction of the SMP and evaluated the effects of the topographically functionalized construct on neuronal behavior. Using an immortalized dorsal root ganglion neuronal cell line, we found that the silk‐wrinkled conduits displayed high neuronal viability and adhesion compared to uncoated conduits and tissue‐culture polystyrene controls. We also found that the wrinkled conduits enabled the neurons to elongate and align parallel to the direction of the wrinkled topography. Longer neurite extension was also observed on the wrinkled conduits compared to their respective controls. These findings demonstrate the potential for functional wrinkled protein coatings to provide directional cues in the fabrication of artificial NGCs for peripheral nerve repair.more » « less
-
ABSTRACT Bacteria form complex multicellular structures on solid surfaces known as biofilms, which allow them to survive in harsh environments. A hallmark characteristic of mature biofilms is the high-level antibiotic tolerance (up to 1,000 times) compared with that of planktonic cells. Here, we report our new findings that biofilm cells are not always more tolerant to antibiotics than planktonic cells in the same culture. Specifically, Escherichia coli RP437 exhibited a dynamic change in antibiotic susceptibility during its early-stage biofilm formation. This phenomenon was not strain specific. Upon initial attachment, surface-associated cells became more sensitive to antibiotics than planktonic cells. By controlling the cell adhesion and cluster size using patterned E. coli biofilms, cells involved in the interaction between cell clusters during microcolony formation were found to be more susceptible to ampicillin than cells within clusters, suggesting a role of cell-cell interactions in biofilm-associated antibiotic tolerance. After this stage, biofilm cells became less susceptible to ampicillin and ofloxacin than planktonic cells. However, when the cells were detached by sonication, both antibiotics were more effective in killing the detached biofilm cells than the planktonic cells. Collectively, these results indicate that biofilm formation involves active cellular activities in adaption to the attached life form and interactions between cell clusters to build the complex structure of a biofilm, which can render these cells more susceptible to antibiotics. These findings shed new light on bacterial antibiotic susceptibility during biofilm formation and can guide the design of better antifouling surfaces, e.g., those with micron-scale topographic structures to interrupt cell-cell interactions. IMPORTANCE Mature biofilms are known for their high-level tolerance to antibiotics; however, antibiotic susceptibility of sessile cells during early-stage biofilm formation is not well understood. In this study, we aim to fill this knowledge gap by following bacterial antibiotic susceptibility during early-stage biofilm formation. We found that the attached cells have a dynamic change in antibiotic susceptibility, and during certain phases, they can be more sensitive to antibiotics than planktonic counterparts in the same culture. Using surface chemistry-controlled patterned biofilm formation, cell-surface and cell-cell interactions were found to affect the antibiotic susceptibility of attached cells. Collectively, these findings provide new insights into biofilm physiology and reveal how adaptation to the attached life form may influence antibiotic susceptibility of bacterial cells.more » « less
-
Understanding protein adsorption behavior on rough and wrinkled surfaces is vital to applications including biosensors and flexible biomedical devices. Despite this, there is a dearth of study on protein interaction with regularly undulating surface topographies, particularly in regions of negative curvature. Here we report nanoscale adsorption behavior of immunoglobulin M (IgM) and immunoglobulin G (IgG) on wrinkled and crumpled surfaces via atomic force microscopy (AFM). Hydrophilic plasma treated poly(dimethylsiloxane) (PDMS) wrinkles with varying dimensions exhibit higher surface coverage of IgM on wrinkle peaks over valleys. Negative curvature in the valleys is determined to reduce protein surface coverage based both on an increase in geometric hindrance on concave surfaces, and reduced binding energy as calculated in coarse-grained molecular dynamics simulations. The smaller IgG molecule in contrast shows no observable effects on coverage from this degree of curvature. The same wrinkles with an overlayer of monolayer graphene show hydrophobic spreading and network formation, and inhomogeneous coverage across wrinkle peaks and valleys attributed to filament wetting and drying effects in the valleys. Additionally, adsorption onto uniaxial buckle delaminated graphene shows that when wrinkle features are on the length scale of the protein diameter, hydrophobic deformation and spreading do not occur and both IgM and IgG molecules retain their dimensions. These results demonstrate that undulating wrinkled surfaces characteristic of flexible substrates can have significant effects on protein surface distribution with potential implications for design of materials for biological applications.more » « less
-
Functionalized Self-Assembled Monolayers: Versatile Strategies to Combat Bacterial Biofilm FormationBacterial infections due to biofilms account for up to 80% of bacterial infections in humans. With the increased use of antibiotic treatments, indwelling medical devices, disinfectants, and longer hospital stays, antibiotic resistant infections are sharply increasing. Annual deaths are predicted to outpace cancer and diabetes combined by 2050. In the past two decades, both chemical and physical strategies have arisen to combat biofilm formation on surfaces. One such promising chemical strategy is the formation of a self-assembled monolayer (SAM), due to its small layer thickness, strong covalent bonds, typically facile synthesis, and versatility. With the goal of combating biofilm formation, the SAM could be used to tether an antibacterial agent such as a small-molecule antibiotic, nanoparticle, peptide, or polymer to the surface, and limit the agent’s release into its environment. This review focuses on the use of SAMs to inhibit biofilm formation, both on their own and by covalent grafting of a biocidal agent, with the potential to be used in indwelling medical devices. We conclude with our perspectives on ongoing challenges and future directions for this field.more » « less
