An official website of the United States government
Halite deposits have long been utilized for interrogating past climate conditions. Microthermometry on halite fluid inclusions has been used to determine ancient water temperatures. One notable obstacle in performing microthermometric measurements, however, is the lack of a vapor bubble in the single-phase liquid inclusions at room temperature. (Pseudo-) isochoric cooling of the inclusions to high negative pressures, far below the homogenization temperature, has commonly been needed to provoke spontaneous vapor bubble nucleation in the liquid. High internal tensile stress in soft host minerals like halite, however, may induce plastic deformation of the inclusion walls, resulting in a wide scatter of measured homogenization temperatures. Nucleation-assisted (NA) microthermometry, in contrast, employs single ultra-short laser pulses provided by a femtosecond laser to stimulate vapor bubble nucleation in metastable liquid inclusions slightly below the expected homogenization temperature. This technique allows for repeated vapor bubble nucleation in selected fluid inclusions without affecting the volumetric properties of the inclusions, and yields highly precise and accurate homogenization temperatures. In this study, we apply, for the first time, NA microthermometry to fluid inclusions in halite and we evaluatethe precision and accuracy of this thermometer utilizing (i) synthetic halite crystals precipitated under controlled laboratory conditions, (ii) modern natural halite that precipitated in the 1980s in the Dead Sea, and (iii) Late Pleistocene halite samples from a sediment core from Death Valley, CA. Our results demonstrate an unprecedented accuracy and precision of the method that provides a new opportunity to reconstruct reliable quantitative temperature records from evaporite archives.
more »
« less
NUCLEATION-ASSISTED MICROTHERMOMETRY IN HALITE FLUID INCLUSIONS: A NOVEL METHOD FOR OBTAINING PRECISE AND ACCURATE PALEOTEMPERATURES FROM LAKE EVAPORITES
Lacustrine halite deposits have long been utilized for interrogating past climate conditions. In particular, microthermometry performed on fluid inclusions in halite crystals has been used to interpret lake water temperatures from ancient deposits. One notable obstacle in performing microthermometry in halite fluid inclusions is the lack of a vapour bubble in the single-phase liquid brine. Isochoric cooling of the inclusions to high negative pressures far below the homogenization temperature has commonly been used to provoke spontaneous vapor bubble nucleation in the metastable liquid. In a host minerals like halite, however, internal tensile stress may result in plastic deformation of the inclusion walls and typically a wide scatter of measured homogenization temperatures. Nucleation-assisted microthermometry, in contrast, employs single ultra-short laser pulses provided by a femtosecond laser to stimulate vapour bubble nucleation in metastable single-phase liquid inclusions slightly below the expected homogenization temperature. This technique allows for repeated vapour bubble nucleation in fluid inclusions without damaging the inclusion walls, yielding highly precise and accurate paleotemperatures from halite fluid inclusions. Moreover, the highly selective nature of nucleation-assisted microthermometry allows for a higher degree of quality control compared to the previous standard method. In this study, we tested the precision and accuracy of nucleation-assisted microthermometry for use in paleoclimate reconstruction utilizing modern halites precipitated in the laboratory under controlled and monitored conditions, Pleistocene halite samples from Death Valley, and varved halites precipitated in the 1980s in the Dead Sea.
more »
« less
- Award ID(s):
- 1812741
- PAR ID:
- 10554270
- Publisher / Repository:
- Geological Society of America
- Date Published:
- Volume:
- 55
- Issue:
- 6
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
Femtosecond lasers, fired in short pulses, can induce bubble cavitation in single-phase liquid fluid inclusions at temperatures near the inclusion homogenization temperature. By coupling femtosecond laser-induced cavitation with microthermometry, paleotemperatures can be extracted from fluid inclusions in primary halite crystals. This technique minimizes plastic deformation of halite by not subjecting samples to extreme temperatures during vapor bubble nucleation. The resultant homogenization temperatures are precise and reproducible. We applied this technique to Eocene Green River Formation primary bottom-growth halites from the Piceance Creek Basin in Colorado. Samples from the basin-center Savage 24-1 core yield average bottom water temperatures of 27.0 ± 1.3 ºC and 20.1 ± 1.2 ºC for the Upper and Lower Salt intervals, respectively. Average bottom water temperatures from modern perennial hypersaline lakes have been shown to reflect the local mean annual air temperature. Therefore, homogenization temperatures from primary bottom-growth halite fluid inclusions are a proxy for mean annual air temperature. These results agree with regional Early Eocene mean annual air temperature estimate ranges from other mineralogical and biochemical proxies, bolstering the reliability of temperature estimates obtained using this technique. Additionally, the highly selective nature of laser induced cavitation microthermometry allows for a higher degree of quality control compared to standard microthermometry, yielding more reproducible and precise results.more » « less
-
We present DiadFit—an open-source Python3 tool for efficient processing of Raman spectroscopy data collected from fluid inclusions, melt inclusions and silicate melts. DiadFit is optimized to fit the characteristic peaks from CO2 fluids (Fermi diads, hot bands, 13C), gas species such as SO2, N2, solid precipitates (e.g. carbonates), and Ne emission lines with easily tweakable background positions and peak shapes. DiadFit's peak fitting functions are used as part of a number of workflows optimized for quantification of CO2 in melt inclusion vapour bubbles and fluid inclusions. DiadFit can also convert between temperature, pressure and density using various CO2 and CO2-H2O equations of state (EOS), allowing calculation of fluid inclusion pressures (and depths in the crust), conversion of homogenization temperatures from microthermometry to CO2 density, and propagation of uncertainties associated with EOS calculations using Monte Carlo methods. There are also functions to quantify the area ratio of the silicate vs. H2O region of spectra collected on silicate glasses to determine H2O contents in glasses and melt inclusions. Documentation and worked examples are available (https://bit.ly/DiadFitRTD, https://bit.ly/DiadFitYouTube).more » « less
-
Rare earth element (REE) deposits are found in association with carbonatite and alkaline systems, where metasomatism plays a significant role in the late-stage transport and enrichment of REE [1]. Fluorite is a common gangue mineral in these mineral deposits and can incorporate varying REE concentrations by substitutions of REE3+ for Ca2+. Fluorite-hosted fluid inclusions contain significant REE concentrations [2], providing a potential record of the hydrothermal ore-forming fluids. The fluorite-fluid REE partitioning mechanisms, however, are largely unknown. To date, only one study [3] measured the partitioning of REE between fluorite and aqueous fluid at 60 °C. Here, we evaluate these REE partitioning mechanisms by combining laboratory experiments with characteristics of natural fluid inclusions that provide a range of salinities and homogenization temperatures relevant to natural systems. Batch-type experiments will be conducted between 100 and 250 °C in Teflon-lined reactors, in which millimeter-sized natural fluorite crystals (Cooke’s Peak, New Mexico) will be reacted with fluids of varying initial REE concentration, pH, and salinity. Kinetic experiments were carried out at 150 °C to test for attainment of a steady state between the fluorite crystals and the aqueous solutions. The reacted fluorite crystals will be studied using SEM, CL and EMPA. Major cations and anions in the quenched fluids will be analyzed using IC and ICP-OES; REE will be determined using solution ICP-MS. These results will permit deriving REE fluorite-fluid partition coefficients. Fluid inclusions in hydrothermal fluorite veins from the fluorite-bastnäsite REE deposits in the Gallinas Mountains in New Mexico are studied to constrain temperatures, salinities, and REE concentrations of hydrothermal ore-forming fluids in alkaline systems. Fluid inclusion assemblages were identified in growth zones and will be further studied using microthermometry. Previous studies found maximum temperatures of 400 °C in sulfate-rich NaCl-KCl brines [4]. The goal will be to link partition coefficients derived from the experiments to the REE partitioning behavior found in the natural fluorite. [1] Gysi et al. (2016), Econ. Geol. 111, 1241-1276; [2] Vasyukova and Williams-Jones (2018) Chem. Geol. 483, 385-396; [3] van Hinsberg et al. (2010), Geology 38, 847-850; [4] Williams-Jones et al. (2000), Econ. Geol. 95, 327-341.more » « less
-
Lacustrine evaporites have potential to document ancient terrestrial climates, including temperatures and their seasonal variations, and atmospheric pCO2. The sodium carbonate mineral nahcolite (NaHCO3) in the early Eocene Parachute Creek Member, Green River Formation, Piceance subbasin, indicates elevated pCO2 concentrations (> 680 ppm) in the water column and in the atmosphere if in contact with brine. These data support a causal connection between elevated atmospheric pCO2 and global warmth during the early Eocene Climatic Optimum. Trona (Na2CO3⋅NaHCO3⋅2H2O), not nahcolite, is the dominant sodium carbonate mineral in the coeval Wilkins Peak Member in the Bridger subbasin, which may be explained by interbasin variations in (1) brine chemistry, (2) temperature, and (3) pCO2. These interpretations are based on equilibrium thermodynamics and simulations that evaporate lake water, but they ignore seasonal changes in water column temperature and pCO2. Winter cooling, rather than evaporative concentration, best explains the fine-scale alternations of nahcolite, halite (NaCl), and nahcolite + halite in the Parachute Creek Member. Simulated evaporation of alkaline source waters from the paleo Aspen River at temperatures between 15⁰ and 27⁰ C and pCO2 at or below 1200 ppm produces the observed mineral sequence in the Wilkins Peak Member: gaylussite (Na2CO3⋅CaCO3⋅5H2O) at temperatures < 27⁰ C and pirssonite (Na2CO3⋅CaCO3⋅2H2O) > 27⁰ C (both now replaced by shortite Na2CO3·2CaCO3), then northupite (Na3Mg(CO3)2Cl), trona, and halite. The challenge of determining paleo-lake temperatures in the Bridger and Piceance subbasins using microthermometry has now been solved using femtosecond lasers that promote nucleation of vapor bubbles in brine inclusions without deforming the halite host crystal. This method shows general agreement with thermodynamic-based calculations and will be used to document mean annual temperatures in the Greater Green River Basin.more » « less
- Free Publicly Accessible Full Text
-
Accepted Manuscript1.0
- Conference Paper:
- https://doi.org/10.1130/abs/2023AM-395666
