Search for: All records

Abstract The Green River Formation of Wyoming, USA, is host to the world’s largest known lacustrine sodium carbonate deposits, which accumulated in a closed basin during the early Eocene greenhouse. Alkaline brines are hypothesized to have been delivered to ancient Gosiute Lake by the Aspen paleoriver that flowed from the Colorado Mineral Belt. To precisely trace fluvial provenance in the resulting deposits, we conducted X-ray fluorescence analyses and petrographic studies across a suite of well-dated sandstone marker beds of the Wilkins Peak Member of the Green River Formation. Principal component analysis reveals strong correlation among elemental abundances, grain composition, and sedimentary lithofacies. To isolate a detrital signal, elements least affected by authigenic minerals, weathering, and other processes were included in a principal component analysis, the results of which are consistent with petrographic sandstone modes and detrital zircon chronofacies of the basin. Sandstone marker beds formed during eccentricity-paced lacustrine lowstands and record the migration of fluvial distributary channel networks from multiple catchments around a migrating depocenter, including two major paleorivers. The depositional topography of these convergent fluvial fans would have inversely defined bathymetric lows during subsequent phases of lacustrine inundation, locations where trona could accumulate below a thermocline. Provenance mapping verifies fluvial connectivity to the Aspen paleoriver and to sources of alkalinity in the Colorado Mineral Belt across Wilkins Peak Member deposition, and shows that the greatest volumes of sediment were delivered from the Aspen paleoriver during deposition of marker beds A, B, D, and I, each of which were deposited coincident with prominent “hyperthermal” isotopic excursions documented in oceanic cores. 

Abstract Modern and ancient lacustrine carbonate build‐ups provide uniquely sensitive sedimentary and geochemical records for understanding the interaction between tectonics, past climates, and local and regional scale basin hydrology. Large (metre to decametre), well‐developed carbonate mounds in the Green River Formation have long been recognized along the margins of an Eocene lake, known as Lake Gosiute. However, their mode of origin and significance with respect to palaeohydrology remain controversial. Here, new sedimentological, Sr isotope data and structural evidence show that significant spring discharge led to the formation of a decametre size complex of shoreline carbonate mounds in the upper Wilkins Peak Member of the Green River Formation at Little Mesa and adjacent areas in the Bridger Basin, Wyoming, USA. Sedimentological evidence indicates that spring discharge was predominantly subaqueous but was, at times, also subaerial, which produced tufa cascades and micro‐rimstone dam structures. The⁸⁷Sr/⁸⁶Sr ratios measured from these subaerial spring deposits are less radiogenic (⁸⁷Sr/⁸⁶Sr = 0.71040 to 0.71101) than contemporaneous palaeolake carbonates (⁸⁷Sr/⁸⁶Sr = 0.71195 to 0.71561) because their parent groundwaters likely interacted with less‐radiogenic Palaeozoic carbonate. Calcite‐cemented sandstone cones and spires (⁸⁷Sr/⁸⁶Sr = 0.71037 to 0.71057) in the Wasatch Formation directly below the spring deposits suggest that groundwaters derived from Palaeozoic carbonates preferentially flowed along thrust faults. These results imply that high spring discharge coincided with lake high stands of the upper Wilkins Peak Member, suggesting that recharge at the north‐west margin of the Bridger Basin contributed to Lake Gosiute’s water budget and lowered the salinity of an underfilled, evaporative lake basin. The findings of this study provide criteria for the recognition of groundwater discharge in palaeolake systems which may lead to the discovery of palaeospring systems in other ancient lake deposits. 

Halite deposits have long been utilized for interrogating past climate conditions. Microthermometry on halite fluid inclusions has been used to determine ancient water temperatures. One notable obstacle in performing microthermometric measurements, however, is the lack of a vapor bubble in the single-phase liquid inclusions at room temperature. (Pseudo-) isochoric cooling of the inclusions to high negative pressures, far below the homogenization temperature, has commonly been needed to provoke spontaneous vapor bubble nucleation in the liquid. High internal tensile stress in soft host minerals like halite, however, may induce plastic deformation of the inclusion walls, resulting in a wide scatter of measured homogenization temperatures. Nucleation-assisted (NA) microthermometry, in contrast, employs single ultra-short laser pulses provided by a femtosecond laser to stimulate vapor bubble nucleation in metastable liquid inclusions slightly below the expected homogenization temperature. This technique allows for repeated vapor bubble nucleation in selected fluid inclusions without affecting the volumetric properties of the inclusions, and yields highly precise and accurate homogenization temperatures. In this study, we apply, for the first time, NA microthermometry to fluid inclusions in halite and we evaluatethe precision and accuracy of this thermometer utilizing (i) synthetic halite crystals precipitated under controlled laboratory conditions, (ii) modern natural halite that precipitated in the 1980s in the Dead Sea, and (iii) Late Pleistocene halite samples from a sediment core from Death Valley, CA. Our results demonstrate an unprecedented accuracy and precision of the method that provides a new opportunity to reconstruct reliable quantitative temperature records from evaporite archives. 

Lacustrine halite deposits have long been utilized for interrogating past climate conditions. In particular, microthermometry performed on fluid inclusions in halite crystals has been used to interpret lake water temperatures from ancient deposits. One notable obstacle in performing microthermometry in halite fluid inclusions is the lack of a vapour bubble in the single-phase liquid brine. Isochoric cooling of the inclusions to high negative pressures far below the homogenization temperature has commonly been used to provoke spontaneous vapor bubble nucleation in the metastable liquid. In a host minerals like halite, however, internal tensile stress may result in plastic deformation of the inclusion walls and typically a wide scatter of measured homogenization temperatures. Nucleation-assisted microthermometry, in contrast, employs single ultra-short laser pulses provided by a femtosecond laser to stimulate vapour bubble nucleation in metastable single-phase liquid inclusions slightly below the expected homogenization temperature. This technique allows for repeated vapour bubble nucleation in fluid inclusions without damaging the inclusion walls, yielding highly precise and accurate paleotemperatures from halite fluid inclusions. Moreover, the highly selective nature of nucleation-assisted microthermometry allows for a higher degree of quality control compared to the previous standard method. In this study, we tested the precision and accuracy of nucleation-assisted microthermometry for use in paleoclimate reconstruction utilizing modern halites precipitated in the laboratory under controlled and monitored conditions, Pleistocene halite samples from Death Valley, and varved halites precipitated in the 1980s in the Dead Sea. 

Chemical sediments from the Early Eocene Green River Formation can be used for assessing hydroclimate and basin evolution during their deposition. The Wilkins Peak Member (WPM) of the Green River Formation contains a relatively continuous record of perennial closed-basin saline lake deposition in the Bridger Basin, southwest Wyoming, from approximately 51.6 to 49.8 Ma. The volumes and paragenesis of authigenic chemical sediments in the WPM are intrinsically related to the chemical evolution of basin brines. The geographic distribution of those chemical sediments across the Bridger Basin relates to the syn- and post-depositional tectonic history of the basin. In this study, we integrated thermodynamic modeling of chemical evolution of lake brines with chemostratigraphic and lithostratigraphic interpretations of the basin-center Solvay S-34-1 core to evaluate physical and chemical changes to and within ancient Lake Gosiute during the Early Eocene. Fine-scale X-ray fluorescence (XRF) scanning along the length of the core provides a high-resolution chemical stratigraphy of the WPM. Thermodynamic modeling of the evaporation of hypothetical inflow waters and lake brines yield predicted sequences of evaporite minerals, allowing estimation of the salinities and evaporated volumes of water required to reach saturation with respect to observed mineral deposits from the basin. The spatial distributions of bedded evaporites allow us to investigate tectonic changes to the basin during and after the deposition of the WPM. Here, we integrate these data to interpret changes in lake-level, salinity, and hydroclimate of ancient Lake Gosiute during the Early Eocene. 

Lacustrine strata are often among the highest-resolution terrestrial paleoclimate archives available. The manner in which climate signals are registered into lacustrine deposits varies, however, as a function of complex sedimentologic and diagenetic processes. The retrieval of reliable records of climatic forcing therefore requires a means of evaluating the potential influence of changing sedimentary transfer functions. Here, we use high-resolution X-ray fluorescence core scanning of the Wilkins Peak Member of the Green River Formation to characterize the long-term evolution of transfer functions in an ancient lacustrine record. Our analysis identifies a shift in the frequency distribution of Milankovitch-band variance between the lower and middle Wilkins Peak Member across a range of temporally calibrated elemental intensity records. Spectral analysis of the lower Wilkins Peak Member shows strong short eccentricity, obliquity, precession, and sub-Milankovitch−scale variability, while the middle Wilkins Peak Member shows strong eccentricity variability and reduced power at higher frequencies. This transition coincides with a dramatic decline in the number and volume of evaporite beds. We attribute this shift to a change in the Wilkins Peak Member depositional transfer function caused by evolving basin morphology, which directly influenced the preservation of bedded evaporite as the paleolake developed from a deeper, meromictic lake to a shallower, holomictic lake. The loss of bedded evaporite, combined with secondary evaporite growth, results in reduced obliquity- and precession-band power and enhanced eccentricity-band power in the stratigraphic record. These results underscore the need for careful integration of basin and depositional system history with cyclostratigraphic interpretation of the dominant astronomical signals preserved in the stratigraphic archive. 

Lacustrine chemical sediments of the Wilkins Peak Member, Eocene Green River Formation potentially preserve paleoclimate information relating to the conditions of their formation and preservation within the lake basin during the Early Eocene Climatic Optimum. The Green River Formation comprises the world’s largest sodium-carbonate evaporite deposit in the form of trona (Na2CO3⋅NaHCO3⋅2H2O) in the Bridger sub-basin and nahcolite (NaHCO3) in the neighboring Piceance Creek basin. Modern analogues suggest that these minerals necessitate the existence of an alkaline source water. Detrital provenance geochronometers suggest that the most likely source for volcanic waters to the Greater Green River Basin is the Colorado Mineral Belt, connected to the basin via the Aspen paleo-river. We tested the hypothesis that magmatic waters from the Colorado Mineral Belt could have supplied the Greater Green River Basin with the alkalinity needed to precipitate sodium-carbonate evaporites that are preserved in the Wilkins Peak Member by numerically simulating the evaporation of modern soda spring waters from northwestern Colorado at various temperature and atmospheric pCO2 conditions. We compare the resulting simulated evaporite sequences of the modern soda spring waters to the mineralogy preserved within the Wilkins Peak Member. Simulated evaporation of Steamboat Springs water produces the closest match to core observations and mineralogy. These simulations provide constraints on the salinities at which various minerals precipitated in the Wilkins Peak Member as well as insights into the regional temperature (>15ºC for gaylussite and trona; >27º for pirssonite and trona) and pCO2 conditions (<1200ppm for gaylussite and trona) during the EECO. 

Femtosecond lasers, fired in short pulses, can induce bubble cavitation in single-phase liquid fluid inclusions at temperatures near the inclusion homogenization temperature. By coupling femtosecond laser-induced cavitation with microthermometry, paleotemperatures can be extracted from fluid inclusions in primary halite crystals. This technique minimizes plastic deformation of halite by not subjecting samples to extreme temperatures during vapor bubble nucleation. The resultant homogenization temperatures are precise and reproducible. We applied this technique to Eocene Green River Formation primary bottom-growth halites from the Piceance Creek Basin in Colorado. Samples from the basin-center Savage 24-1 core yield average bottom water temperatures of 27.0 ± 1.3 ºC and 20.1 ± 1.2 ºC for the Upper and Lower Salt intervals, respectively. Average bottom water temperatures from modern perennial hypersaline lakes have been shown to reflect the local mean annual air temperature. Therefore, homogenization temperatures from primary bottom-growth halite fluid inclusions are a proxy for mean annual air temperature. These results agree with regional Early Eocene mean annual air temperature estimate ranges from other mineralogical and biochemical proxies, bolstering the reliability of temperature estimates obtained using this technique. Additionally, the highly selective nature of laser induced cavitation microthermometry allows for a higher degree of quality control compared to standard microthermometry, yielding more reproducible and precise results. 

Mineralogy, petrographic textures, and sedimentary structures from the world’s largest trona deposit, the Wilkins Peak Member (WPM) of the early Eocene Green River Formation (GRF), Bridger subbasin, Wyoming, provide key data about depositional conditions and paleoenvironments. The 250 m-long WPM interval in the Solvay S-34-1 drill core analyzed in this study contains a detailed record of sedimentation in the Bridger subbasin at the deepest area of a hydrologically-closed basin during peak Cenozoic atmospheric CO2 concentrations. Large accumulations of trona (Na3(HCO3)(CO3)·2H2O), shortite (Na2Ca2(CO3)3), northupite (Na3Mg (CO3)2Cl), and halite (NaCl; now replaced by trona), occur in the lower half of the WPM. Modern saline lake environments such as Lake Magadi, Kenya, and the Dead Sea, Israel-Jordan, are useful analogues for interpreting paleolake conditions associated with evaporite deposition in the Solvay S-34-1 core. Solvay saline lake deposits are organized into meter-scale shallowing-upward successions, beginning with (1) oil shale overlain by (2) trona, in places interbedded with oil shale, followed by (3) peloidal dolomite grainstone and/or silty dolomitic mudstone, and (4) massive mudstone with disruption features or desiccation cracks, and/or siliciclastic sandstone with ripple cross-stratification. Based on observations of modern hypersaline lake environments, WPM evaporite deposition at the basin depocenter is interpreted to be controlled by inflow water composition and volume, evaporative concentration, and seasonally-driven lake temperature fluctuations, resulting in recurrent patterns in evaporite mineralogies and textures.