More Like this

1. Lithium Diffusion Mechanism through Solid–Electrolyte Interphase in Rechargeable Lithium Batteries

   https://doi.org/10.1021/acs.jpcc.9b00436  

   Ramasubramanian, Ajaykrishna; Yurkiv, Vitaliy; Foroozan, Tara; Ragone, Marco; Shahbazian-Yassar, Reza; Mashayek, Farzad (April 2019, The Journal of Physical Chemistry C)
2. Lithium diffusion in lithium tantalate as measured by confocal Raman spectroscopy

   https://doi.org/10.1007/s10853-022-07105-y  

   Ivy, Jacob M.; Brennecka, Geoff L. (April 2022, Journal of Materials Science)
3. Monolignol lithium cation basicity estimates and lithium adduct ion optimized geometries

   https://doi.org/10.1016/j.ijms.2019.05.008  

   Dean, Kimberly R.; Lynn, Bert C. (August 2019, International Journal of Mass Spectrometry)
4. Role of Lithium Iodide Addition to Lithium Thiophosphate: Implications beyond Conductivity

   https://doi.org/10.1021/acs.chemmater.9b05286  

   Singh, Nikhilendra; Horwath, James P.; Bonnick, Patrick; Suto, Koji; Stach, Eric A.; Matsunaga, Tomoya; Muldoon, John; Arthur, Timothy S. (September 2020, Chemistry of Materials)

   null (Ed.)
5. Ultra‐Thin Lithium Silicide Interlayer for Solid‐State Lithium‐Metal Batteries

   https://doi.org/10.1002/adma.202210835  

   Sung, Jaekyung; Kim, So Yeon; Harutyunyan, Avetik; Amirmaleki, Maedeh; Lee, Yoonkwang; Son, Yeonguk; Li, Ju (April 2023, Advanced Materials)

   Abstract All‐solid‐state batteries with metallic lithium (Li_BCC) anode and solid electrolyte (SE) are under active development. However, an unstable SE/Li_BCCinterface due to electrochemical and mechanical instabilities hinders their operation. Herein, an ultra‐thin nanoporous mixed ionic and electronic conductor (MIEC) interlayer (≈3.25 µm), which regulates Li_BCCdeposition and stripping, serving as a 3D scaffold for Li⁰ad‐atom formation, Li_BCCnucleation, and long‐range transport of ions and electrons at SE/Li_BCCinterface is demonstrated. Consisting of lithium silicide and carbon nanotubes, the MIEC interlayer is thermodynamically stable against Li_BCCand highly lithiophilic. Moreover, its nanopores (<100 nm) confine the deposited Li_BCCto the size regime where Li_BCCexhibits “smaller is much softer” size‐dependent plasticity governed by diffusive deformation mechanisms. The Li_BCCthus remains soft enough not to mechanically penetrate SE in contact. Upon further plating, Li_BCCgrows in between the current collector and the MIEC interlayer, not directly contacting the SE. As a result, a full‐cell having Li_3.75Si‐CNT/Li_BCCfoil as an anode and LiNi_0.8Co_0.1Mn_0.1O₂as a cathode displays a high specific capacity of 207.8 mAh g⁻¹, 92.0% initial Coulombic efficiency, 88.9% capacity retention after 200 cycles (Coulombic efficiency reaches 99.9% after tens of cycles), and excellent rate capability (76% at 5 C). 

   more » « less