An official website of the United States government
Abstract Mafic volcanic activity is dominated by effusive to mildly explosive eruptions. Plinian and ignimbrite-forming mafic eruptions, while rare, are also possible; however, the conditions that promote such explosivity are still being explored. Eruption style is determined by the ability of gas to escape as magma ascends, which tends to be easier in low-viscosity, mafic magmas. If magma permeability is sufficiently high to reduce bubble overpressure during ascent, volatiles may escape from the magma, inhibiting violent explosive activity. In contrast, if the permeability is sufficiently low to retain the gas phase within the magma during ascent, bubble overpressure may drive magma fragmentation. Rapid ascent may induce disequilibrium crystallization, increasing viscosity and affecting the bubble network with consequences for permeability, and hence, explosivity. To explore the conditions that promote strongly explosive mafic volcanism, we combine microlite textural analyses with synchrotron x-ray computed microtomography of 10 pyroclasts from the 12.6 ka mafic Curacautín Ignimbrite (Llaima Volcano, Chile). We quantify microlite crystal size distributions (CSD), microlite number densities, porosity, bubble interconnectivity, bubble number density, and geometrical properties of the porous media to investigate the role of magma degassing processes at mafic explosive eruptions. We use an analytical technique to estimate permeability and tortuosity by combing the Kozeny-Carman relationship, tortuosity factor, and pyroclast vesicle textures. The groundmass of our samples is composed of up to 44% plagioclase microlites, > 85% of which are < 10 µm in length. In addition, we identify two populations of vesicles in our samples: (1) a convoluted interconnected vesicle network produced by extensive coalescence of smaller vesicles (> 99% of pore volume), and (2) a population of very small and completely isolated vesicles (< 1% of porosity). Computed permeability ranges from 3.0 × 10−13to 6.3 × 10−12m2, which are lower than the similarly explosive mafic eruptions of Tarawera (1886; New Zealand) and Etna (112 BC; Italy). The combination of our CSDs, microlite number densities, and 3D vesicle textures evidence rapid ascent that induced high disequilibrium conditions, promoting rapid syn-eruptive crystallization of microlites within the shallow conduit. We interpret that microlite crystallization increased viscosity while simultaneously forcing bubbles to deform as they grew together, resulting in the permeable by highly tortuous network of vesicles. Using the bubble number densities for the isolated vesicles (0.1-3−3 × 104 bubbles per mm3), we obtain a minimum average decompression rate of 1.4 MPa/s. Despite the textural evidence that the Curacautín magma reached the percolation threshold, we propose that rapid ascent suppressed outgassing and increased bubble overpressures, leading to explosive fragmentation. Further, using the porosity and permeability of our samples, we estimated that a bubble overpressure > 5 MPa could have been sufficient to fragment the Curacautín magma. Other mafic explosive eruptions report similar disequilibrium conditions induced by rapid ascent rate, implying that syn-eruptive disequilibrium conditions may control the explosivity of mafic eruptions more generally.
more »
« less
Petrology of the explosive deposits from the April 2021 eruption of La Soufrière volcano, St Vincent: a time-series analysis of microlites
Abstract After more than three months of lava dome extrusion, La Soufrière (St Vincent) transitioned to a series of explosive eruptions in April 2021. Here we present a time-series petrologic analysis of the phenocryst and microlite populations during the firstc.48 h of explosivity to constrain ascent conditions and processes that drove changes in behaviour. Primary eruptive products were crystal-rich (45–50 vol%) basaltic andesites with similar phenocryst phase assemblages and compositions. The change in eruptive style is consistent with overpressurization as a consequence of second boiling from anhydrous microlite crystallization. The microlites display variation between the explosive phases, with two populations: (1) ‘inherited’ − normally zoned high-An plagioclase (>An70) + olivine (Fo62–79) + clinopyroxene + titanomagnetite, inferred to have crystallized at depths >15 km and high water pressures; (2) ‘juvenile’ − unzoned plagioclase (An45–65) + clinopyroxene + orthopyroxene + intermediate pyroxene (Wo12–38) + titanomagnetite, inferred to have crystallized upon ascent due to decompression and degassing. Scoria from the first explosions featured extensive groundmass crystallization and a significant ‘inherited’ microlite population. Later explosions had a more abundant ‘juvenile’ microlite population and lower crystallinity, consistent with more rapid ascent from depth, initiated by decompression following initial blasts and destruction of the lava dome.
more »
« less
- Award ID(s):
- 2132566
- PAR ID:
- 10555815
- Publisher / Repository:
- DOI PREFIX: 10.1144
- Date Published:
- Journal Name:
- Geological Society, London, Special Publications
- Volume:
- 539
- Issue:
- 1
- ISSN:
- 0305-8719
- Format(s):
- Medium: X Size: p. 201-230
- Size(s):
- p. 201-230
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
We investigate whether decompression rates derived from three often-disparate petrologic techniques (microlites, bubbles, and melt embayments) can be reconciled or integrated for a more complete understanding of magma ascent in the conduit. We focus on the well-studied and -documented earliest Plinian eruptions (June 12, 1991) of Mount Pinatubo. Using a newly developed two-stage decompression-diffusion model, volatile profiles in quartz-hosted embayments reveal an initial stage of decompression nearly two orders of magnitude slower than final rates. In applying time-integrated models of microlite and bubble nucleation and growth, initial decompression rates from embayments are supported by microlite modeling results, whereas final rates are in close agreement with bubble number densities. This consistency and continuity between speedometers supports the sensitivity of different petrologic recorders to specific regions of the conduit system and highlights the fidelity of embayments as recorders of decompression throughout the entire conduit. Ascent timescales derived from Pinatubo embayments range from hours to days, coinciding with the visual onset of lava effusion leading to explosive activity.more » « less
-
Nucleation of H2O vapor bubbles in magma requires surpassing a chemical supersaturation threshold via decompression. The threshold is minimized in the presence of a nucleation substrate (heterogeneous nucleation, <50 MPa), and maximized when no nucleation substrate is present (homogeneous nucleation, >100 MPa). The existence of explosively erupted aphyric rhyolite magma staged from shallow (<100 MPa) depths represents an apparent paradox that hints at the presence of a cryptic nucleation substrate. In a pair of studies focusing on Glass Mountain eruptive units from Medicine Lake, California, we characterize titanomagnetite nanolites and ultrananolites in pumice, obsidian, and vesicular obsidian (Brachfeld et al., 2024,https://doi.org/10.1029/2023GC011336), calculate titanomagnetite crystal number densities, and compare titanomagnetite abundance with the physical properties of pumice to evaluate hypotheses on the timing of titanomagnetite crystallization. Titanomagnetite crystals with grain sizes of approximately 3–33 nm are identified in pumice samples from the thermal unblocking of low‐temperature thermoremanent magnetization. The titanomagnetite number densities for pumice are 10^18 to 10^20 m^−3, comparable to number densities in pumice and obsidian obtained from room temperature methods (Brachfeld et al., 2024,https://doi.org/10.1029/2023GC011336'>https://doi.org/10.1029/2023GC011336). This range exceeds reported bubble number densities (BND) within the pumice from the same eruptive units (average BND ∼4 × 10^14 m^−3). The similar abundances of nm‐scale titanomagnetite crystals in the effusive and explosive products of the same eruption, together with the lack of correlation between pumice permeability and titanomagnetite content, are consistent with titanomagnetite formation having preceded the bubble formation. Results suggest sub‐micron titanomagnetite crystals are responsible for heterogeneous bubble nucleation in this nominally aphyric rhyolite magma.more » « less
-
Bubble and crystal textures evolve during magma ascent, altering properties that control ascent such as permeability and viscosity. Eruption style results from feedbacks between ascent, bubble nucleation and growth, microlite crystallization, and gas loss, all processes recorded in pyroclasts. We show that pyroclasts of the mafic Curacautín ignimbrite of Llaima volcano, Chile, record a history of repeated autobrecciation, fusing, and crystallization. We identified pyroclasts with domains of heterogeneous vesicle textures in sharp contact with one another that are overprinted by extensive microlite crystallization. Broken crystals with long axes (l) >10 μm record fragmentation events during the eruption. A second population of unbroken microlites with l ≤10 μm overprint sutures between fused domains, suggesting the highly crystalline groundmass formed at shallow depths after autobrecciation and fusing. Nearly all pyroclasts contain plutonic and ancestral Llaima lithics as inclusions, implying that fusing occurs from a few kilometers depth to as shallow as the surface. We propose that Curacautín ignimbrite magma autobrecciated during ascent and proto-pyroclasts remained melt rich enough to fuse together. Lithics from the conduit margins were entrained into the proto-pyroclasts before fusing. Autobrecciation broke existing phenocrysts and microlites; rapid post-fusing crystallization then generated the highly crystalline groundmass. This proposed conduit process has implications for interpreting the products of mafic explosive eruptions.more » « less
-
Abstract The Quaternary Big Pine (BP) volcanic field in eastern California is notable for the occurrence of mantle xenoliths in several flows. This points to rapid ascent of basalt through the crust and precludes prolonged storage in a crustal reservoir. In this study, the hypothesis of phenocryst growth during ascent is tested for several basalts (13–7 wt% MgO) and shown to be viable. Phenocrysts of olivine and clinopyroxene frequently display diffusion‐limited growth textures, and clinopyroxene compositions are consistent with polybaric crystallization. When the most Mg‐rich olivine in each sample is paired with the whole‐rock composition, resulting(olivine‐melt) values (0.31–0.36) match those calculated from literature models (0.32–0.36). Application of a Mg‐ and a Ni‐based olivine‐melt thermometer from the literature, both calibrated on the same experimental data set, leads to two sets of temperatures that vary linearly with whole‐rock MgO wt%. Because the Ni thermometer is independent of water content, it provides the actual temperature at the onset of olivine crystallization (1247–1097°C), whereas the Mg thermometer gives the temperature under anhydrous conditions and thus allows ΔT(=TMg − TNi = depression of liquidus due to water) to be obtained. The average ΔTfor all samples is ~59°C, which is consistent with analyzed water contents of 1.5–3.0 wt% in olivine‐hosted melt inclusions from the literature. Because the application of olivine‐melt thermometry/hygrometry at the liquidus only requires microprobe analyses of olivine combined with whole‐rock compositions, it can be used to obtain large global data sets of the temperature and water contents of basalts from different tectonic settings.more » « less
