Abstract Barium titanate (BTO) is a ferroelectric material used in capacitors because of its high bulk dielectric constant. However, the impact of the size of BTO on its dielectric constant is not yet fully understood and is highly contested. Here, we present an investigation into the dielectric constant of BTO nanoparticles with diameters ranging between 50 and 500 nm. BTO nanoparticles were incorporated into acrylonitrile butadiene styrene and injection molded into parallel plate capacitors, which were used to determine nanocomposite dielectric constants. The dielectric constants of BTO nanoparticles were obtained by combining experimental measurements with computational results from COMSOL simulations of ABS-matrix nanocomposites containing BTO. The dielectric constant of BTO was observed to be relatively constant at nanoparticle diameters as small as 200 nm but sharply declined at smaller nanoparticle sizes. These results will be useful in the development of improved energy storage and power conditioning systems utilizing BTO nanoparticles. Graphical abstract
more »
« less
Understanding surfaces and interfaces in nanocomposites of silicone and barium titanate through experiments and modeling
Barium titanate (BTO) is a ferroelectric perovskite used in electronics and energy storage systems because of its high dielectric constant. Decreasing the BTO particle size was shown to increase the dielectric constant of the perovskite, which is an intriguing but contested result. We investigated this result by fabricating silicone-matrix nanocomposite specimens containing BTO particles of decreasing diameter. Furthermore, density functional theory modeling was used to understand the interactions at the BTO particle surface. Combining results from experiments and modeling indicated that polymer type, particle surface interactions, and particle surface structure can influence the dielectric properties of polymer-matrix nanocomposites containing BTO.
- PAR ID:
- 10558436
- Publisher / Repository:
- Cambridge University Press (CUP)
- Date Published:
- Journal Name:
- MRS Communications
- Volume:
- 14
- Issue:
- 6
- ISSN:
- 2159-6867
- Format(s):
- Medium: X Size: p. 1319-1327
- Size(s):
- p. 1319-1327
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
BaTiO 3 (BTO) is considered the most commonly used ceramic material in multilayer ceramic capacitors due to its desirable dielectric properties. Considering that the miniaturization of electronic devices represents an expanding field of research, modification of BTO has been performed to increase dielectric constant and DC bias characteristic/sensitivity. This research presents the effect of N 2 and air atmospheres on morphological and dielectric properties of BTO nanoparticles modified with organometallic salt at sintering temperatures of [Formula: see text]C, [Formula: see text]C, [Formula: see text]C, and [Formula: see text]C. Measured dielectric constants were up to 35,000, with achieved very high values in both atmospheres. Field emission scanning electron microscopy (FESEM) was used for morphological characterization, revealing a porous structure in all the samples. The software image analysis of FESEM images showed a connection between particle and pore size distribution, as well as porosity. Based on the data from the image analysis, the prediction of dielectric properties in relation to morphology indicated that yttrium-based organometallic salt reduced oxygen vacancy generation in N 2 atmosphere. DC bias sensitivity measurements showed that samples with higher dielectric constant had more pronounced sensitivity to voltage change, but most of the samples were stable up to 100 V, making our modified BTO a promising candidate for capacitors.more » « less
-
Strain-sensitive Ba x Sr 1− x TiO 3 perovskite systems are widely used because of their superior nonlinear dielectric behaviors. In this research, new heterostructures including paraelectric Ba 0.5 Sr 0.5 TiO 3 (BSTO) and ferroelectric BaTiO 3 (BTO) materials were epitaxially fabricated on flexible muscovite substrate. Through simple bending, the application of mechanical force can regulate the dielectric constant of BSTO from −77 to 36% and the channel current of BTO-based ferroelectric field effect transistor by two orders. The detailed mechanism was studied through the exploration of phase transition and determination of band structure. In addition, the phase-field simulations were implemented to provide theoretical support. This research opens a new avenue for mechanically controllable components based on high-quality oxide heteroepitaxy.more » « less
-
more » « less
ABSTRACT A sol–gel polymerization method was developed to make polyimide (PI) silsesquioxane (SSQ) nanoparticles as functional, soft dielectric materials. The surface functionalization of the polymer chain backbone and chain ends of poly(trimellitic anhydride chloride‐
co ‐4,4′‐methylenedianiline),PMR‐15 resin , withpara ‐(chloromethyl)‐phenylethyltrimethoxy silane yielded a novel sol–gel reactive sites functionalized PMR‐silane precursor. Upon base‐catalyzed hydrolysis and condensation of the PMR‐silane precursor, spherical, raspberry‐like PMR‐SSQ nanoparticles were obtained in considerably good yield. Controlling the particle size distribution was attempted upon adjusting the molar ratio between the silane precursor and the base, as well as in the presence of a catalytic amount of silica sols. Particle composition, thermal stability, and morphology were confirmed from Fourier transform infrared, thermogravimetric analysis, and scanning electron microscopy analyses. Nanoparticles, visualized under transmission electron microscopy exhibit a nanoporous structure. The Brunauer–Emmett–Teller analysis confirmed that the average pore dimension is ranged from 2 to 5 nm. The dielectric constant of PMR‐SSQ nanoparticles was as low as 1.95, compared to dielectric constants of 3.05 and 3.13 for PMR‐15 and PMR‐silane, respectively. Thus, the base‐catalyzed sol–gel polymerization of alkoxysilylated PI offers a novel synthetic path to make functional nanoporous PI nanostructures that possess ultralow dielectric constants. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem.2013 ,57 , 562–571. -
Investigation of Piezoelectricity and Resistivity of Surface Modified Barium Titanate Nanocompositesnull (Ed.)Polymer-ceramic nanocomposite piezoelectric and dielectric films are of interest because of their possible application to advanced embedded energy storage devices for printed wired electrical boards. The incompatibility of the two constituent materials; hydrophilic ceramic filler, and hydrophobic epoxy limit the filler concentration, and thus, their piezoelectric properties. This work aims to understand the role of surfactant concentration in establishing meaningful interfacial layers between the epoxy and ceramic filler particles by observing particle surface morphology, piezoelectric strain coefficients, and resistivity spectra. A comprehensive study of nanocomposites, comprising non-treated and surface treated barium titanate (BTO), embedded within an epoxy matrix, was performed. The surface treatments were performed with two types of coupling agents: Ethanol and 3-glycidyloxypropyltrimethoxysilan. The observations of particle agglomeration, piezoelectric strain coefficients, and resistivity were compared, where the most ideal properties were found for concentrations of 0.02 and 0.025. This work demonstrates that the interfacial core-shell processing layer concentration influences the macroscopic properties of nanocomposites, and the opportunities for tuning interfacial layers for desirable characteristics of specific applications.more » « less
