skip to main content
US FlagAn official website of the United States government
dot gov icon
Official websites use .gov
A .gov website belongs to an official government organization in the United States.
https lock icon
Secure .gov websites use HTTPS
A lock ( lock ) or https:// means you've safely connected to the .gov website. Share sensitive information only on official, secure websites.

Explore Research Products in the PAR
It may take a few hours for recently added research products to appear in PAR search results.


Title: Enhancing Uptake Capability of Green Carbon Black Recycled from Scrap Tires for Water Purification
This study reports on the highly simple fabrication of green carbon black (GCB) generated from scrap tires with acetic acid to improve the adsorption efficiency for water purification, which is thoroughly compared with conventional carbon black (CB) obtained from petrochemicals. Unlike traditional modification processes with strong acids or bases, the introduction of a relatively mild acid readily allowed for the effective modification of GCB to increase the uptake capability of metal ions and toxic organic dyes to serve as effective adsorbents. The morphological features and thermal decomposition patterns were examined by electron microscopy and thermogravimetric analysis (TGA). The surface functional groups were characterized by Fourier transform infrared spectroscopy (FTIR) and X-ray photoelectron spectroscopy (XPS). The structural information (ratio of D-defects/G band-graphitic domains) obtained by Raman spectroscopy clearly suggested the successful fabrication of GCB (ID/IG ratio of 0.74), which was distinctively different from typical CB (ID/IG ratio of 0.91). In the modified GCB, the specific surface area (SBET) gradually increased with the reduction of pore size as a function of acetic acid content (52.97 m2/g for CB, 86.64 m2/g for GCB, 102.10-119.50 m2/g for acid-treated GCB). The uptake capability of the modified GCB (312.5 mg/g) for metal ions and organic dyes was greater than that of the unmodified GCB (161.3 mg/g) and typical CB (181.8 mg/g), presumably due to the presence of adsorbed acid. Upon testing them as adsorbents in an aqueous solution, all these carbon materials followed the Langmuir isotherm over the Freundlich model. In addition, the removal rates of cationic species (>70% removal of Cu2+ and crystal violet in 30 min) were much faster and far greater than those of anionic metanil yellow (<40% removal in 3 h), given the strong electrostatic interactions. Thus, this work demonstrates the possibility of recycling waste tires in the powder form of GCB as a cost-effective and green adsorbent that can potentially substitute traditional CB, and the modification strategy provides a proof of concept for developing simple fabrication guidelines of other carbonaceous materials.  more » « less
Award ID(s):
2116612
PAR ID:
10561094
Author(s) / Creator(s):
; ; ; ; ;
Publisher / Repository:
MDPI
Date Published:
Journal Name:
Coatings
Volume:
14
Issue:
4
ISSN:
2079-6412
Page Range / eLocation ID:
389
Format(s):
Medium: X
Sponsoring Org:
National Science Foundation
More Like this
  1. (, Water science technology)
    Rauch, Wolfgang; null (Ed.)
    Water contamination by nitrogen and phosphorus ions has a direct consequence of eutrophication to the ecosystem. The objective of this study is to investigate the production of hydrochars by acetic acid or sodium hydroxide assisted hydrothermal carbonization (HTC), various activation methods, and the potential of hydrochar as an adsorbent to remove NH4+-N and PO43−-P from wastewater. The results showed that acetic acid or sodium hydroxide assisted HTC and activation with magnesium chloride or air could improve the surface properties of hydrochar. Acetic acid modification generated extensive oxygenated functional groups, while sodium hydroxide modification produced hydrochar with a high N/C ratio and surface aromaticity. Treating hydrochar with magnesium chloride could impregnate nano-magnesium particles on the hydrochar, thereby improving the ability to remove N and P. Air activation of hydrochar resulted in more oxygen containing functional groups. The NH4+-N and PO43−-P adsorption capacities of these hydrochars ranged from 92.6 to 122.4mg/g and 1.6 to 15.8mg/g, respectively. The adsorption capacity of hydrochars in swine wastewater is similar to the results of artificial wastewater. The results suggested that Mg-nanoparticle dispersion and oxygen-containing functional groups played a major role in adsorption than ion exchange and physisorption. 
    more » « less
  2. ; ; ; ; (, Water science technology)
    Rauch, W Liu (Ed.)
    Water contamination by nitrogen and phosphorus ions has a direct consequence of eutrophication to the ecosystem. The objective of this study is to investigate the production of hydrochars by acetic acid or sodium hydroxide assisted hydrothermal carbonization (HTC), various activation methods, and the potential of hydrochar as an adsorbent to remove NH4+-N and PO43--P from wastewater. The results showed that acetic acid or sodium hydroxide assisted HTC and activation with magnesium chloride or air could improve the surface properties of hydrochar. Acetic acid modification generated extensive oxygenated functional groups, while sodium hydroxide modification produced hydrochar with a high N/C ratio and surface aromaticity. Treating hydrochar with magnesium chloride could impregnate nano-magnesium particles on the hydrochar, thereby improving the ability to remove N and P. Air activation of hydrochar resulted in more oxygen containing functional groups. The NH4+-N and PO43--P adsorption capacities of these hydrochars ranged from 92.6 to 122.4mg/g and 1.6 to 15.8mg/g, respectively. The adsorption capacity of hydrochars in swine wastewater is similar to the results of artificial wastewater. The results suggested that Mg-nanoparticle dispersion and oxygen-containing functional groups played a major role in adsorption than ion exchange and physisorption. 
    more » « less
  3. ; ; ; ; (, Nanomaterials)
    Anionic carboxylated cellulose nanofibers (CNF) are effective media to remove cationic contaminants from water. In this study, sustainable cationic CNF-based adsorbents capable of removing anionic contaminants were demonstrated using a simple approach. Specifically, the zero-waste nitro-oxidization process was used to produce carboxylated CNF (NOCNF), which was subsequently converted into a cationic scaffold by crosslinking with aluminum ions. The system, termed Al-CNF, is found to be effective for the removal of fluoride ions from water. Using the Langmuir isotherm model, the fluoride adsorption study indicates that Al-CNF has a maximum adsorption capacity of 43.3 mg/g, which is significantly higher than that of alumina-based adsorbents such as activated alumina (16.3 mg/g). The selectivity of fluoride adsorption in the presence of other anionic species (nitrate or sulfate) by Al-CNF at different pH values was also evaluated. The results indicate that Al-CNF can maintain a relatively high selectivity towards the adsorption of fluoride. Finally, the sequential applicability of using spent Al-CNF after the fluoride adsorption to further remove cationic contaminant such as Basic Red 2 dye was demonstrated. The low cost and relatively high adsorption capacity of Al-CNF make it suitable for practical applications in fluoride removal from water. 
    more » « less
  4. ; ; ; ; (, RSC Advances)
    null (Ed.)
    Heavy metal ions are highly toxic and widely spread as environmental pollutants. This work reports the development of two novel chelating adsorbents, based on the chemical modifications of graphene oxide and zirconium phosphate by functionalization with melamine-based chelating ligands for the effective and selective extraction of Hg( ii ) and Pb( ii ) from contaminated water sources. The first adsorbent melamine, thiourea-partially reduced graphene oxide (MT-PRGO) combines the heavier donor atom sulfur with the amine and triazine nitrogen's functional groups attached to the partially reduced GO nanosheets to effectively capture Hg( ii ) ions from water. The MT-PRGO adsorbent shows high efficiency for the extraction of Hg( ii ) with a capacity of 651 mg g −1 and very fast kinetics resulting in a 100% removal of Hg( ii ) from 500 ppb and 50 ppm concentrations in 15 second and 30 min, respectively. The second adsorbent, melamine zirconium phosphate (M-ZrP), is designed to combine the amine and triazine nitrogen's functional groups of melamine with the hydroxyl active sites of zirconium phosphate to effectively capture Pb( ii ) ions from water. The M-ZrP adsorbent shows exceptionally high adsorption affinity for Pb( ii ) with a capacity of 681 mg g −1 and 1000 mg g −1 using an adsorbent dose of 1 g L −1 and 2 g L −1 , respectively. The high adsorption capacity is also coupled with fast kinetics where the equilibrium time required for the 100% removal of Pb( ii ) from 1 ppm, 100 ppm and 1000 ppm concentrations is 40 seconds, 5 min and 30 min, respectively using an adsorbent dose of 1 g L −1 . In a mixture of six heavy metal ions at a concentration of 10 ppm, the removal efficiency is 100% for Pb( ii ), 99% for Hg( ii ), Cd( ii ) and Zn( ii ), 94% for Cu( ii ), and 90% for Ni( ii ) while at a higher concentration of 250 ppm the removal efficiency for Pb( ii ) is 95% compared to 23% for Hg( ii ) and less than 10% for the other ions. Because of the fast adsorption kinetics, high removal capacity, excellent regeneration, stability and reusability, the MT-PRGO and M-ZrP are proposed as top performing remediation adsorbents for the solid phase extraction of Hg( ii ) and Pb( ii ), respectively from contaminated water. 
    more » « less
  5. ; ; ; ; ; ; ; ; ; ; et al (, Processes)
    Slag and Al/Mg oxide modified Douglas fir biochar (AMOB) were compared for their phosphate adsorbing abilities for use individually or in combination for simulated agriculture run-off remediation in wetlands. Aqueous batch and column sorption experiments were performed for both low-cost materials. AMOB was prepared in bulk using a novel green method. Material analyses included XRD, elemental analysis, SEM, EDX, and BET. Biochar and slag have different phosphate removal mechanisms. In short residence times (≤2 h), adsorption phenomena dominate for both adsorbents. Surface area likely plays a role in adsorption performance; slag was measured to be 4.1 m2/g while biochar’s surface area was 364.1 m2/g. In longer residence times (>2 h), the slow leaching of metals (Ca, Al, and Mg) from slag continue to remove phosphate through the precipitation of metal phosphates. In 24 h, slag removed more free phosphate from the solution than AMOB. Preliminary fixed bed column adsorption of slag or AMOB alone and in tandem was performed adopting a scaled-up model that can be used to remediate agricultural runoff with high phosphate content. Additionally, a desorption study was performed to analyze the efficiency of material regeneration. While AMOB does not release any adsorbed phosphates, slag slowly releases 5.7% adsorbed phosphate over seven days. 
    more » « less
  • Citation Formats
  • MLA
  • APA
  • Chicago
  • BibTeX
  • Save / Share this Record
  • Send to Email