skip to main content


Title: Using Electrical Resistance As a Diagnostic During Process-Structure-Property Investigation of CNT Forests
Abstract

Controlling the self-assembly of carbon nanotube (CNT) forests is important for tailoring their ensemble properties for specific applications. In this study, real-time electrical resistance measurements of in-situ CNT forest syntheses was established as a method to interrogate the evolution of CNT forest morphology. The method employs in-situ scanning electron microscopy (SEM) synthesis techniques to correlate observed morphological changes to electrical resistance. A finite-element simulation was used to simulate CNT forest synthesis and the evolution of electrical resistance in a configuration like that used experimentally. The simulation considers the contribution of CNT electrical resistance, CNT-CNT junction resistance, and CNT-electrode contact resistance. Simulation results indicate that an increased number of CNT-CNT junctions with time have a diminishing effect on increasing electrical conductance. Experimentally observed increases in electrical resistance are attributed to increasing CNT delamination from the electrical contacts.

 
more » « less
Award ID(s):
2026847
PAR ID:
10562947
Author(s) / Creator(s):
;
Publisher / Repository:
American Society of Mechanical Engineers
Date Published:
ISBN:
978-0-7918-8760-8
Format(s):
Medium: X
Location:
New Orleans, Louisiana, USA
Sponsoring Org:
National Science Foundation
More Like this
  1. The piezoresistance of carbon nanotube (CNT)-coated microfibers is examined using diametric compression. Diverse CNT forest morphologies were studied by changing the CNT length, diameter, and areal density via synthesis time and fiber surface treatment prior to CNT synthesis. Large-diameter (30–60 nm) and relatively low-density CNTs were synthesized on as-received glass fibers. Small-diameter (5–30 nm) and-high density CNTs were synthesized on glass fibers coated with 10 nm of alumina. The CNT length was controlled by adjusting synthesis time. Electromechanical compression was performed by measuring the electrical resistance in the axial direction during diametric compression. Gauge factors exceeding three were measured for small-diameter (<25 μm) coated fibers, corresponding to as much as 35% resistance change per micrometer of compression. The gauge factor for high-density, small-diameter CNT forests was generally greater than those for low-density, large-diameter forests. A finite element simulation shows that the piezoresistive response originates from both the contact resistance and intrinsic resistance of the forest itself. The change in contact and intrinsic resistance are balanced for relatively short CNT forests, while the response is dominated by CNT electrode contact resistance for taller CNT forests. These results are expected to guide the design of piezoresistive flow and tactile sensors.

     
    more » « less
  2. While the physical properties of carbon nanotubes (CNTs) are often superior to conventional engineering materials, their widespread adoption into many applications is limited by scaling the properties of individual CNTs to macroscale CNT assemblies known as CNT forests. The self-assembly mechanics of CNT forests that determine their morphology and ensemble properties remain poorly understood. Few experimental techniques exist to characterize and observe the growth and self-assembly processes in situ. Here we introduce the use of in-situ scanning electron microscope (SEM) synthesis based on chemical vapor deposition (CVD) processing. In this preliminary report, we share best practices for in-situ SEM CVD processing and initial CNT forest synthesis results. Image analysis techniques are developed to identify and track the movement of catalyst nanoparticles during synthesis conditions. Finally, a perspective is provided in which in-situ SEM observations represent one component of a larger system in which numerical simulation, machine learning, and digital control of experiments reduces the role of humans and human error in the exploration of CNT forest process-structure-property relationships. 
    more » « less
  3. Abstract

    Understanding and controlling the self-assembly of vertically oriented carbon nanotube (CNT) forests is essential for realizing their potential in myriad applications. The governing process–structure–property mechanisms are poorly understood, and the processing parameter space is far too vast to exhaustively explore experimentally. We overcome these limitations by using a physics-based simulation as a high-throughput virtual laboratory and image-based machine learning to relate CNT forest synthesis attributes to their mechanical performance. Using CNTNet, our image-based deep learning classifier module trained with synthetic imagery, combinations of CNT diameter, density, and population growth rate classes were labeled with an accuracy of >91%. The CNTNet regression module predicted CNT forest stiffness and buckling load properties with a lower root-mean-square error than that of a regression predictor based on CNT physical parameters. These results demonstrate that image-based machine learning trained using only simulated imagery can distinguish subtle CNT forest morphological features to predict physical material properties with high accuracy. CNTNet paves the way to incorporate scanning electron microscope imagery for high-throughput material discovery.

     
    more » « less
  4. The parameter space of CNT forest synthesis is vast and multidimensional, making experimental and/or numerical exploration of the synthesis prohibitive. We propose a more practical approach to explore the synthesis-process relationships of CNT forests using machine learning (ML) algorithms to infer the underlying complex physical processes. Currently, no such ML model linking CNT forest morphology to synthesis parameters has been demonstrated. In the current work, we use a physics-based numerical model to generate CNT forest morphology images with known synthesis parameters to train such a ML algorithm. The CNT forest synthesis variables of CNT diameter and CNT number densities are varied to generate a total of 12 distinct CNT forest classes. Images of the resultant CNT forests at different time steps during the growth and self-assembly process are then used as the training dataset. Based on the CNT forest structural morphology, multiple single and combined histogram-based texture descriptors are used as features to build a random forest (RF) classifier to predict class labels based on correlation of CNT forest physical attributes with the growth parameters. The machine learning model achieved an accuracy of up to 83.5% on predicting the synthesis conditions of CNT number density and diameter. These results are the first step towards rapidly characterizing CNT forest attributes using machine learning. Identifying the relevant process-structure interactions for the CNT forests using physics-based simulations and machine learning could rapidly advance the design, development, and adoption of CNT forest applications with varied morphologies and properties 
    more » « less
  5. Recent experiments have revealed the strain‐dependent phenomenon of electrical resistance for CNT‐polymer nanocomposites, but at present, no theory seems to exist to explain such observations. In this paper, a strain‐dependent homogenization scheme with considerations of volume change of the nanocomposite and strain‐dependent electron tunneling is developed to this end. The effective electrical conductivity and secant moduli of the nanocomposite are selected as the two homogenization parameters. The thermodynamic driving force and the corresponding evolution equation of the progressive degradation process of the interface are also derived. It is demonstrated that the predicted resistance change ratio and strain sensitivity factor of CNT‐polymer nanocomposites are in close agreement with the experimental results over a wide range of strain loading. With the addition of CNT nanofillers, both theory and experiments show a decrease of resistance change ratio and strain sensitivity factor. As the strain loading increases, the resistance change ratio first increases slightly and then increases rapidly. Among other novel features of the theory, it is also shown that CNT‐polymer nanocomposites can attain a very high strain sensitivity factor even at a low CNT loading. It is believed that this research can provide a practical guidance to the design of high‐sensitivity strain sensors.

     
    more » « less