This content will become publicly available on July 10, 2025
- Award ID(s):
- 2041470
- PAR ID:
- 10563302
- Publisher / Repository:
- IEEE
- Date Published:
- ISBN:
- 979-8-3503-8265-5
- Page Range / eLocation ID:
- 1121 to 1126
- Format(s):
- Medium: X
- Location:
- Toronto, ON, Canada
- Sponsoring Org:
- National Science Foundation
More Like this
-
Abstract A major challenge for graphene applications is the lack of mass production technology for large‐scale and high‐quality graphene growth and transfer. Here, a roll‐to‐roll (R2R) dry transfer process for large‐scale graphene grown by chemical vapor deposition is reported. The process is fast, controllable, and environmentally benign. It avoids chemical contamination and allows the reuse of graphene growth substrates. By controlling tension and speed of the R2R dry transfer process, the electrical sheet resistance is achieved as 9.5 kΩ sq−1, the lowest ever reported among R2R dry transferred graphene samples. The R2R dry transferred samples are used to fabricate graphene‐based field‐effect transistors (GFETs) on polymer. It is demonstrated that these flexible GFETs feature a near‐zero doping level and a gate leakage current one to two orders of magnitude lower than those fabricated using wet‐chemical etched graphene samples. The scalability and uniformity of the R2R dry transferred graphene is further demonstrated by successfully transferring a 3 × 3 in2sample and measuring its field‐effect mobility with 36 millimeter‐scaled GFETs evenly spaced on the sample. The field‐effect mobility of the R2R dry transferred graphene is determined to be 205 ± 36 cm2 V−1.
-
Abstract The widespread utilization of metamaterials, despite their immense transformative potential, faces challenges regarding scalability in mass production. To address these limitations, an additive method that leverages liquid inks and selective wetting to produce scalable and cost‐effective metamaterials is presented. UV‐based imprinting lithography is utilized to fabricate surface energy‐modulated patterns, enabling precise solution patterning. This approach, unlike conventional UV‐based imprinting lithography, not only accurately produces the negative replica of the stamp topography during UV‐induced crosslinking but also transfers a hydrophobic layer onto the raised surfaces of the imprinted hydrophilic layer, resulting in 3D shapes with spatially modulated surface energy. In the second process step, a functional ink is dragged over the patterned substrate where it dewets to fill the hydrophilic recesses. This innovative process enables high‐speed metamaterial production, with ink deposition speeds up to 12 m min−1. The method accommodates a wide range of inks, including metals, dielectrics, and semiconductors, providing meticulous control over vertical structures such as pattern thickness and hetero‐multilayer formation. Additionally, it offers flexibility in creating metamaterials on free‐standing ultra‐thin sheets, introducing desirable attributes like foldability and disposability. The effectiveness of this approach is validated through the fabrication and characterization of metallic metamaterials.