skip to main content
US FlagAn official website of the United States government
dot gov icon
Official websites use .gov
A .gov website belongs to an official government organization in the United States.
https lock icon
Secure .gov websites use HTTPS
A lock ( lock ) or https:// means you've safely connected to the .gov website. Share sensitive information only on official, secure websites.

Explore Research Products in the PAR
It may take a few hours for recently added research products to appear in PAR search results.


Title: Understanding the Dichroic Effect of Silver Nanoparticles Synthesized by a Chemical Reduction Method
During our study of the synthesis of metal nanoparticles via chemical reduction methods, we found that some colloidal solutions of silver nanoparticles displayed dichroic effect. The dichroic effect is a phenomenon where a material displays two different colors in transmitted light and reflected light. In this study, dichroic silver nanoparticles were obtained via a simple chemical reduction method under ambient conditions. Ascorbic acid was used as the reducing agent and trisodium citrate was used as the stabilizing agent. A colloidal solution of synthesized silver nanoparticles showed an opaque gray color in reflected light and a translucent pink color in transmitted light. Another colloidal solution prepared in the presence of copper (II) sulphate displayed a new combination of dichroic colors: opaque blue and translucent green. To understand the formation of dichroic effect, Transmission electron microscopy (TEM) and UV-Vis spectroscopy were used to characterize and study the silver nanoparticles in these colloids. TEM study showed that silver nanoparticles with different sizes and shapes were present in the solutions that displayed dichroic effect. By comparing the morphology of dichroic silver nanoparticles with that of the silver nanoparticles that exhibited no dichroic effect, we concluded that both the sizes and the shapes of nanoparticles play important roles in the formation of dichroic effect. The small particles are responsible for the absorbance of light, which results in the color in transmitted light. While large particles account for the scattering of light and lead to the color in reflected light. Different combinations of nanoparticles with different sizes and shapes lead to different colors for the dichroic effects.  more » « less
Award ID(s):
2009765
PAR ID:
10565277
Author(s) / Creator(s):
; ; ;
Publisher / Repository:
SciEP
Date Published:
Journal Name:
Nanoscience and Nanotechnology Research
Volume:
8
Issue:
1
ISSN:
2372-4668
Page Range / eLocation ID:
1 to 5
Format(s):
Medium: X
Sponsoring Org:
National Science Foundation
More Like this
  1. ; ; ; ; (, Advanced Optical Materials)
    Abstract The biological chromophore xanthommatin (Xa) contributes to the yellow, red, and brown colors and hues in cephalopods and arthropods. In many cases, Xa is also present as part of or coupled to supramolecular nanostructures, whose function has yet to be fully explored. To investigate how such structural elements impact the perceived color of these natural chromophores, amorphous photonic assemblies containing Xa chemically coupled to 100 nm polystyrene nanoparticles (PS100‐XA) are fabricated, and blended with pure polystyrene (PS) nanoparticles of varying sizes. Structural colors are observed comprising these bidispersed colloidal assemblies that are tuned by the particle size of PS nanoparticles, the concentration of PS100‐XA, the local environment, and the method of assembly. In all cases, the addition of PS100‐XA regulates the color hue and contrast of the resultant assemblies by increasing light absorption while minimizing incoherent light scattering. Taken together, the results demonstrate how biochromes like Xa can enhance the color intensity and the diversity in colors present in common photonic assemblies. 
    more » « less
  2. ; ; (, The Journal of Physical Chemistry C)
    Producing silver nanoparticles (AgNPs) of homogenous shapes and sizes that are stable for oxidation remains challeng-ing. A fast and accessible synthesis is presented to tune the homogeneity of triangular plates (AgNPLs) using light. This study showed AgNPs of varying shapes (spheres, rounded triangles, and rods), sizes (10-20 nm, 40 nm, and 33 nm, re-spectively), and surface chemistry (citrate and PVP capping agents) undergo a light-induced conversion to 75-85% sharp AgNPLs with narrow-localized surface plasmon resonance (LSPR) band with λmax at 680 nm and an average edge length of 40 nm ± 5.6 nm as confirmed by UV-Vis spectroscopy and transmission electron microscopy (TEM) respectively. Fur-ther exploration into the mechanism confirmed that Ag+ ions, O2, and light are critical parameters for the light-induced transformation of AgNSs to AgNPLs. Under an inert atmosphere, shape transformation is inhibited, reinforcing the essen-tial role of O2 in the process. More remarkably, when AgNPs of any size or shape are coated with a hybrid lipid-coated membrane, the AgNPs had exceptional photostability, showing no change LSPR band, underscoring their resistance to photooxidation and shape transformation even in the presence of excess Ag+ ions, O2, and AgNSs. The results highlight the importance of light in tuning the homogeneity of AgNPs and the superior stabilizing effect of hybrid lipid membranes. 
    more » « less
  3. ; (, Applied Optics)
    This work applies digital holography to image stationary micro-particles in color. The approach involves a Michelson interferometer to mix reference light with the weak intensity light backscattered from a distribution of particles. To enable color images, three wavelengths are used, 430, 532, and 633 nm, as primary light sources. Three separate backscattered holograms are recorded simultaneously, one for each wavelength, which are resolved without spectral cross talk using a three-CMOS prism sensor. Fresnel diffraction theory is used to render monochrome images from each hologram. The images are then combined via additive color mixing with red, green, and blue as the primary colors. The result is a color image similar in appearance to that obtained with a conventional microscope in white-light epi-illumination mode. A variety of colored polyethylene micro-spheres and nonspherical dust particles demonstrate the feasibility of the approach and illustrate the effect of simple speckle-noise suppression and white balance methods. Finally, a chromaticity analysis is applied that is capable of differentiating particles of different colors in a quantitative and objective manner. 
    more » « less
  4. ; ; ; ; ; ; ; (, The Journal of Physical Chemistry B)
    We employ photothermally driven self-assembly of colloidal particles to design microscopic structures with programmable size and tunable order. The experimental system is based on a binary mixture of “plasmonic heater” gold nanoparticles and “assembly building block” microparticles. Photothermal heating of the gold nanoparticles under visible light causes a natural convection flow that efficiently assembles the microscale building block particles (diameter 1–10 μm) into a monolayer. We identify the onset of active Brownian motion of colloidal particles under this convective flow by varying the conditions of light intensity, gold nanoparticle concentration, and sample height. We realize a crowded assembly of microparticles around the center of illumination and show that the size of the particle crowd can be programmed using patterned light illumination. In a binary mixture of gold nanoparticles and polystyrene microparticles, we demonstrate the formation of rapid and large-scale crystalline monolayers, covering an area of 0.88 mm2 within 10 min. We find that the structural order of the assembly can be tuned by varying the surface charge of the nanoparticles and the size of the microparticles, giving rise to the formation of different phases–colloidal crystals, crowds, and gels. Using Monte Carlo simulations, we explain how the phases emerge from the interplay between hydrodynamic and electrostatic interactions, as well as the assembly kinetics. Our study demonstrates the promise of self-assembly with programmable shapes and structural order under nonequilibrium conditions using an accessible setup comprising only binary mixtures and LED light. 
    more » « less
  5. ; ; ; ; (, Advanced Functional Materials)
    Abstract The nucleation and growth of nanoparticles are critical processes determining the size, shape, and properties of resulting nanoparticles. However, understanding the complex mechanisms guiding the formation and growth of colloidal multielement alloy nanoparticles remains incomplete due to the involvement of multiple elements with different properties. This study investigates in situ colloidal synthesis of multielement alloys using transmission electron microscopy (TEM) in a liquid cell. Two different pathways for nanoparticle formation in a solution containing Au, Pt, Ir, Cu, and Ni elements, resulting in two distinct sets of particles are observed. One set exhibits high Au and Cu content, ranging from 10 to 30 nm, while the other set is multi‐elemental, with Pt, Cu, Ir, and Ni, all less than 4 nm. The findings suggest that, besides element miscibility, metal ion characteristics, particularly reduction rates, and valence numbers, significantly impact particle composition during early formation stages. Density functional theory (DFT) simulations confirm differences in nanoparticle composition and surface properties collectively influence the unique growth behaviors in each nanoparticle set. This study illuminates mechanisms underlying the formation and growth of multielement nanoparticles by emphasizing factors responsible for chemical separation and effects of interplay between composition, surface energies, and element miscibility on final nanoparticles size and structure. 
    more » « less
  • Citation Formats
  • MLA
  • APA
  • Chicago
  • BibTeX
  • Save / Share this Record
  • Send to Email