Abstract Ambient fine particulate matter (PM2.5) is the world’s leading environmental health risk factor. Quantification is needed of regional contributions to changes in global PM2.5exposure. Here we interpret satellite-derived PM2.5estimates over 1998-2019 and find a reversal of previous growth in global PM2.5air pollution, which is quantitatively attributed to contributions from 13 regions. Global population-weighted (PW) PM2.5exposure, related to both pollution levels and population size, increased from 1998 (28.3 μg/m3) to a peak in 2011 (38.9 μg/m3) and decreased steadily afterwards (34.7 μg/m3in 2019). Post-2011 change was related to exposure reduction in China and slowed exposure growth in other regions (especially South Asia, the Middle East and Africa). The post-2011 exposure reduction contributes to stagnation of growth in global PM2.5-attributable mortality and increasing health benefits per µg/m3marginal reduction in exposure, implying increasing urgency and benefits of PM2.5mitigation with aging population and cleaner air.
more »
« less
First Results From a Calibrated Network of Low‐Cost PM 2.5 Monitors in Mombasa, Kenya Show Exceedance of Healthy Guidelines
Abstract The paucity of fine particulate matter (PM2.5) measurements limits estimates of air pollution mortality in Sub‐Saharan Africa. Well calibrated low‐cost sensors can provide reliable data especially where reference monitors are unavailable. We evaluate the performance of Clarity Node‐S PM monitors against a Tapered element oscillating microbalance (TEOM) 1400a and develop a calibration model in Mombasa, Kenya's second largest city. As‐reported Clarity Node‐S data from January 2023 through April 2023 was moderately correlated with the TEOM‐1400a measurements (R2 = 0.61) and exhibited a mean absolute error (MAE) of 7.03 μg m−3. Employing three calibration models, namely, multiple linear regression (MLR), Gaussian mixture regression and random forest (RF) decreased the MAE to 4.28, 3.93, and 4.40 μg m−3respectively. TheR2value improved to 0.63 for the MLR model but all other models registered a decrease (R2 = 0.44 and 0.60 respectively). Applying the correction factor to a five‐sensor network in Mombasa that was operated between July 2021 and July 2022 gave insights to the air quality in the city. The average daily concentrations of PM2.5within the city ranged from 12 to 18 μg m−3. The concentrations exceeded the WHO daily PM2.5limits more than 50% of the time, in particular at the sites nearby frequent industrial activity. Higher averages were observed during the dry and cold seasons and during early morning and evening periods of high activity. These results represent some of the first air quality monitoring measurements in Mombasa and highlight the need for more study.
more »
« less
- Award ID(s):
- 2020677
- PAR ID:
- 10566498
- Publisher / Repository:
- AGU
- Date Published:
- Journal Name:
- GeoHealth
- Volume:
- 8
- Issue:
- 9
- ISSN:
- 2471-1403
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
null (Ed.)Urban air pollution poses a major threat to human health. Understanding where and when urban air pollutant concentrations peak is essential for effective air quality management and sustainable urban development. To this end, we implement a mobile monitoring methodology to determine the spatiotemporal distribution of particulate matter (PM) and black carbon (BC) throughout Philadelphia, Pennsylvania and use hot spot analysis and heatmaps to determine times and locations where pollutant concentrations are highest. Over the course of 12 days between June 27 and July 29, 2019, we measured air pollution concentrations continuously across two 150 mile (241.4 km) long routes. Average daily mean concentrations were 11.55 ± 5.34 μg/m 3 (PM 1 ), 13.48 ± 5.59 μg/m 3 (PM 2.5 ), 16.13 ± 5.80 μg/m 3 (PM 10 ), and 1.56 ± 0.39 μg/m 3 (BC). We find that fine PM size fractions (PM 2.5 ) constitute approximately 84% of PM 10 and that BC comprises 11.6% of observed PM 2.5 . Air pollution hotspots across three size fractions of PM (PM 1 , PM 2.5 , and PM 10 ) and BC had similar distributions throughout Philadelphia, but were most prevalent in the North Delaware, River Wards, and North planning districts. A plurality of detected hotspots found throughout the data collection period (30.19%) occurred between the hours of 8:00 AM–9:00 AM.more » « less
-
Introduction:Traditional methods to estimate exposure to PM2.5(particulate matter with less than 2.5 µm in diameter) have typically relied on limited regulatory monitors and do not consider human mobility and travel. However, the limited spatial coverage of regulatory monitors and the lack of consideration of mobility limit the ability to capture actual air pollution exposure. Methods:This study aims to improve traditional exposure assessment methods for PM2.5by incorporating the measurements from a low-cost sensor network (PurpleAir) and regulatory monitors, an automated machine learning modeling framework, and big human mobility data. We develop a monthly-aggregated hourly land use regression (LUR) model based on automated machine learning (AutoML) and assess the model performance across eight metropolitan areas within the US. Results:Our results show that integrating low-cost sensor with regulatory monitor measurements generally improves the AutoML-LUR model accuracy and produces higher spatial variation in PM2.5concentration maps compared to using regulatory monitor measurements alone. Feature importance analysis shows factors highly correlated with PM2.5concentrations, including satellite aerosol optical depth, meteorological variables, vegetation, and land use. In addition, we incorporate human mobility data on exposure estimates regarding where people visit to identify spatiotemporal hotspots of places with higher risks of exposure, emphasizing the need to consider both visitor numbers and PM2.5concentrations when developing exposure reduction strategies. Discussion:This research provides important insights for further public health studies on air pollution by comprehensively assessing the performance of AutoML-LUR models and incorporating human mobility into considering human exposure to air pollution.more » « less
-
Abstract Recently, due to accelerations in urban and industrial development, the health impact of air pollution has become a topic of key concern. Of the various forms of air pollution, fine atmospheric particulate matter (PM2.5; particles less than 2.5 micrometers in diameter) appears to pose the greatest risk to human health. While even moderate levels of PM2.5can be detrimental to health, spikes in PM2.5to atypically high levels are even more dangerous. These spikes are believed to be associated with regionally specific meteorological factors. To quantify these associations, we develop a Bayesian spatiotemporal quantile regression model to estimate the spatially varying effects of meteorological variables purported to be related to PM2.5levels. By adopting a quantile regression model, we are able to examine the entire distribution of PM2.5levels; for example, we are able to identify which meteorological drivers are related to abnormally high PM2.5levels. Our approach uses penalized splines to model the spatially varying meteorological effects and to account for spatiotemporal dependence. The performance of the methodology is evaluated through extensive numerical studies. We apply our modeling techniques to 5 years of daily PM2.5data collected throughout the eastern United States to reveal the effects of various meteorological drivers.more » « less
-
To tackle the severe fine particle (PM2.5) pollution in China, the government has implemented stringent control policies mainly on power plants, industry, and transportation since 2005, but estimates of the effectiveness of the policy and the temporal trends in health impacts are subject to large uncertainties. By adopting an integrated approach that combines chemical transport simulation, ambient/household exposure evaluation, and health-impact assessment, we find that the integrated population-weighted exposure to PM2.5(IPWE) decreased by 47% (95% confidence interval, 37–55%) from 2005 [180 (146–219) μg/m3] to 2015 [96 (83–111) μg/m3]. Unexpectedly, 90% (86–93%) of such reduction is attributed to reduced household solid-fuel use, primarily resulting from rapid urbanization and improved incomes rather than specific control policies. The IPWE due to household fuels for both cooking and heating decreased, but the impact of cooking is significantly larger. The reduced household-related IPWE is estimated to avoid 0.40 (0.25–0.57) million premature deaths annually, accounting for 33% of the PM2.5-induced mortality in 2015. The IPWE would be further reduced by 63% (57–68%) if the remaining household solid fuels were replaced by clean fuels, which would avoid an additional 0.51 (0.40–0.64) million premature deaths. Such a transition to clean fuels, especially for heating, requires technology innovation and policy support to overcome the barriers of high cost of distribution systems, as is recently being attempted in the Beijing–Tianjin–Hebei area. We suggest that household-fuel use be more highly prioritized in national control policies, considering its effects on PM2.5exposures.more » « less
An official website of the United States government

