An official website of the United States government
Abstract Nepheline syenites from the ∼1.2 Ga Ilímaussaq Complex of southern Greenland are examined to assess the utility of anisotropy of magnetic susceptibility (AMS) fabrics as proxies for silicate petrofabrics. Mineral lamination is a relatively common structural feature in cumulate rocks, including in the Ilímaussaq intrusion, but there is little consensus on the process (or processes) responsible for its formation. The Ilímaussaq AMS data are combined with rock magnetic experiments and electron backscatter diffraction (EBSD) measurements to characterize the magnetic mineralogy and compare the magnetic fabrics obtained to the silicate petrofabric. The data show that Na-amphibole (arfvedsonite) is most likely the dominant control on the AMS fabrics in the coarse-grained nepheline syenites (referred to as kakortokites), and that the AMS fabric is inverse relative to the observed silicate fabric. The EBSD data for a kakortokite sample suggests that the petrofabric is defined by arfvedsonite and is wholly planar, with evidence of only weak cross-lineation of c axes. The fine-grained nepheline syenites (lujavrites), two of which have a well-developed lamination carried by Na-pyroxene (aegirine), appear to have composite AMS fabrics that are considered to be a consequence of a mixed aegirine (normal) and arfvedsonite (inverse) response. The combined datasets shed light on the mechanisms of fabric acquisition in both lithologies. In the kakortokites, the AMS fabrics and silicate crystallographic preferred orientations, as well as the lack of observed microstructural evidence for subsolidus intra-crystal deformation, support models invoking gravitationally controlled crystal mats in the development of the macro-rhythmic layering of these rocks. In the lujavrites, the strong planar fabrics revealed by both the AMS and EBSD datasets, with some evidence of subsolidus deformation, point to fabric formation and perhaps even aegirine crystallization at the postcumulus stage. The combination of EBSD and AMS fabric datasets is a powerful means of deciphering the processes responsible for mineral alignment in igneous cumulates.
more »
« less
Towards an integrated texture toolkit, 1: unveiling the complex relationship between crystal shape and fabric in EBSD data
Rock textures observed via thin section are skewed from their true 3D nature. This is due to various cut effects—artifacts introduced due to the lower dimensional nature of the thin section relative to the rock. These cut effects can be corrected, and several methods have been developed to invert crystal shape and crystal size, but with each process performed separately and sequentially. With the ongoing adoption of electron backscatter diffraction (EBSD) by petrologists, an additional data stream has now become available: the 3D orientation of 2D grain sections. For EBSD analysis, no stereological corrections are typically applied for interpreting the data. This study tests whether this orientational information is skewed due to a fabric cut effect. We test this by numerically generating synthetic crystal datasets representative of several crystal shapes and population sizes. We find that EBSD orientational data has a fabric cut effect since crystals oriented with long axes perpendicular to the thin section are more likely to be sampled compared to those with long axes oriented parallel to it. This effect must be accounted for to interpret the true 3D fabric accurately. Towards this end, we develop two new tools for working with EBSD-derived fabric: (1) a simple first-order test for determining if a measured fabric exceeds that of the fabric cut effect, and (2) a method of inverting cut fabrics that provides robust error estimations. We demonstrate the applicability and accuracy of these methods using a range of synthetic examples and a natural sample. With these newly developed tools, there is clear potential for a new textural toolkit framework, to further our ability to correct for the various cut effects while also providing accurate uncertainty estimates.
more »
« less
- Award ID(s):
- 2112035
- PAR ID:
- 10566819
- Publisher / Repository:
- Springer-Verlag
- Date Published:
- Journal Name:
- Contributions to Mineralogy and Petrology
- Volume:
- 179
- Issue:
- 4
- ISSN:
- 0010-7999
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
We present an orientation system for thin sections used for microanalysis, applicable to both billets and cores. The orientation system enables spatially referenced observations and consists of three parts. First, we establish a reference corner that is the uppermost corner of the sample on the thin section, in its original geographic orientation in the field or laboratory setting. This corner is tied to a right-hand coordinate system, in which all reference axes point downward. A geographic direction-based, rather than uppermost corner-based, convention for a reference corner can be substituted for projects that utilize sub-horizontally oriented thin sections. The reference corner - combined with orientation metadata - define a unique position of the thin section in geographic space. Second, we propose a system of small saw cuts (notches) that minimizes the number of notches required on the sample, to distinguish both the reference corner and the orientation of the thin section relative to fabric (e.g., foliation/lineation), if present. The utility of a notching standard is that it provides an inherent doublecheck on thin section orientation and facilitates sharing between users. Third, we develop a grid system in order to locate features of interest on the thin section, relative to the reference corner. Any of these systems – referencing, notching, and gridding – can be used independently. These systems are specifically designed to work with digital data systems, which are currently being developed, allowing researchers to share microstructural data with each other and facilitating new types of big data science in the field of structural geology.more » « less
-
Abstract Mafic rocks are volumetrically and rheologically significant components of the mid‐to lower continental crust, yet tools to study their fabrics have not been well developed. We examine amphibolites exhumed from mid‐to lower crustal levels in a gneiss dome (Entia dome, central Australia) that display various strengths of mineral lineation and foliation associated with different deformation geometries. Combining petrofabric analysis (electron backscatter diffraction, EBSD) with magnetic fabric analysis (Anisotropy of magnetic susceptibility (AMS), we quantify relationships between AMS‐derived fabrics and crystallographic‐preferred alignment of fabric‐defining amphiboles. We combine single‐crystal AMS data with EBSD data to model amphibole textures and their expected magnetic anisotropy. We formulate a new EBSD‐derived petrofabric index,CAindex, and correlate it with the calculated AMS shape parameterU.CAindexvalues can then be estimated for natural samples using measuredUvalues, leveraging both rapid but texturally low‐resolution AMS and texturally‐resolved but time‐ and analytically‐onerous petrofabric analyses to interpret petrofabrics from magnetic fabric data. In the Entia dome, we identify amphibole c‐fibers (L‐tectonite) in the high‐strain core of the dome, which reflect constrictional strains. In contrast, a‐fibers (S‐tectonites) are dominant near the dome margins and indicate flattening strains. Fabrics measured in different structural subdomains agree well with 2D and 3D numerical models of finite strain distribution in domal structures. Combining textural modeling, AMS measurements, and EBSD analyses allows investigation of previously unexploited records of ductile deformation and flow in amphibole‐bearing rocks. These results can be applied to a wide range of field‐based studies of tectonic and magnetic processes.more » « less
-
Abstract Spontaneous electric polarization of solid ferroelectrics follows aligning directions of crystallographic axes. Domains of differently oriented polarization are separated by domain walls (DWs), which are predominantly flat and run along directions dictated by the bulk translational order and the sample surfaces. Here we explore DWs in a ferroelectric nematic (NF) liquid crystal, which is a fluid with polar long-range orientational order but no crystallographic axes nor facets. We demonstrate that DWs in the absence of bulk and surface aligning axes are shaped as conic sections. The conics bisect the angle between two neighboring polarization fields to avoid electric charges. The remarkable bisecting properties of conic sections, known for millennia, play a central role as intrinsic features of liquid ferroelectrics. The findings could be helpful in designing patterns of electric polarization and space charge.more » « less
-
Precambrian rocks in the Black Hills record multiple tectonic processes, including suturing of the Wyoming and Superior cratons from ca. 1.740-1.715 Ga. To date, studies focused on this suturing event have primarily focused on prograde metamorphism and structures that record shortening between the cratonic blocks. However, a strike-slip shear zone subparallel to the shortening structures, named the Dakota Tectonic Zone (DTZ), has also been documented but is poorly understood. We examined intracrystalline deformation and associated microstructures in oriented thin sections of the Little Elk Granite (2.560 Ga mylonitized augen gneiss) within the mapped domain of the DTZ to further document how the strike-slip deformation fits into the Precambrian structural evolution of the Black Hills. At the outcrop scale, the Little Elk Granite contains two types of fabrics. Fabric type 1 is an augen gneiss fabric characterized by alignment of ~1-5 cm K-feldspar crystals that is interpreted to have formed during emplacement of the Little Elk Granite. Fabric type 2 cross-cuts the augen gneiss fabric and is characterized by comminution of the large K-feldspar grains within mylonitic shear zones. Whereas the type 1 fabric is folded throughout the field area, the type 2 shear fabric is consistently oriented at ~150/70°SW and contains a down-dip stretching lineation. Oriented thin sections cut perpendicular to foliation and parallel to lineation contain broken feldspar crystals that in some cases also exhibit undulose extinction. Domains between paired fragments of broken feldspar crystals are filled in with equant polycrystalline quartz aggregates and are regularly oriented at a high angle (>45°) to the shear foliation. Quartz-rich domains in the type 2 fabric generally display undulose extinction and dynamic recrystallization textures. Kinematic indicators from asymmetric strain shadows associated with feldspar porphyroclasts and asymmetrically folded micas yield dominantly top-to-the-left sense of motion, but top-to-the-right shear sense is also common (46%). The sum of microstructural data from the Little Elk Granite suggests that the DTZ is an upper greenschist facies (~300-450°C) left-lateral pure shear dominated transpression zone that likely formed late in the suturing of the Wyoming and Superior cratons.more » « less
- Free Publicly Accessible Full Text
-
Accepted Manuscript1.0
- Journal Article:
- https://doi.org/10.1007/s00410-024-02128-x
