An official website of the United States government
In order to improve the predictive abilities of weather and climate models, it is essential to understand the behaviour of wind stress at the ocean surface. Wind stress is contingent on small-scale interfacial dynamics typically not directly resolved in numerical models. Although skin friction contributes considerably to the total stress up to moderate wind speeds, it is notoriously challenging to measure and predict using physics-based approaches. This work proposes a supervised machine learning (ML) model that estimates the spatial distribution of the skin-friction drag over wind waves using solely wave elevation and wave age, which are relatively easy to acquire. The input–output pairs are high-resolution wave profiles and their corresponding surface viscous stresses collected from laboratory experiments. The ML model is built upon a convolutional neural network architecture that incorporates the Mish nonlinearity as its activation function. Results show that the model can accurately predict the overall distribution of viscous stresses; it captures the peak of viscous stress at/near the crest and its dramatic drop to almost null just past the crest in cases of intermittent airflow separation. The predicted area-aggregate skin friction is also in excellent agreement with the corresponding measurements. The proposed method offers a practical pathway for estimating both local and area-aggregate skin friction and can be easily integrated into existing numerical models for the study of air–sea interactions.
more »
« less
Two-phase flow simulations of surface waves in wind-forced conditions
The paper is devoted to two-phase flow simulations and investigates the ability of a diffusive interface Cahn–Hilliard volume-of-fluid model to capture the dynamics of the air–sea interface at geophysically relevant Reynolds numbers. It employs a hybrid filtered/averaging improved detached eddy simulation method to model turbulence and utilizes a continuum model to account for surface tension if the diffuse interface is under-resolved by the grid. A numerical wind-wave tank is introduced, and results obtained for two known wind-wave conditions are analyzed in comparison to experimental data at matched Reynolds numbers. The focus of the comparison is on both time-averaged and wave-coherent quantities, and includes pressure, velocity as well as modeled and resolved Reynolds stresses. In general, numerical predictions agree well with the experimental measurements and reproduce many wave-dependent flow features. Reynolds stresses near the water surface are found to be especially important in modulating the critical layer height. It is concluded that the diffusive interface approach proves to be a promising method for future studies of air–sea interface dynamics in geophysically relevant flows.
more »
« less
- Award ID(s):
- 2023626
- PAR ID:
- 10568490
- Publisher / Repository:
- Physics of Fluids
- Date Published:
- Journal Name:
- Physics of Fluids
- Volume:
- 35
- Issue:
- 7
- ISSN:
- 1070-6631
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
In recent years, the global transition towards green energy, driven by environmental concerns and increasing electricity demands, has remarkably reshaped the energy landscape. The transformative potential of marine wind energy is particularly critical in securing a sustainable energy future. To achieve this objective, it is essential to have an accurate understanding of wind dynamics and their interactions with ocean waves for the proper design and operation of offshore wind turbines (OWTs). The accuracy of met-ocean models depends critically on their ability to correctly capture sea-surface drag over the multiscale ocean surface—a quantity typically not directly resolved in numerical models and challenging to acquire using either field or laboratory measurements. Although skin friction drag contributes considerably to the total wind stress, especially at moderate wind speeds, it is notoriously challenging to predict using physics-based approaches. The current work introduces a novel approach based on a convolutional neural network (CNN) model to predict the spatial distributions of skin friction drag over wind-generated surface waves using wave profiles, local wave slopes, local wave phases, and the scaled wind speed. The CNN model is trained using a set of high-resolution laboratory measurements of air-side velocity fields and their respective surface viscous stresses obtained over a range of wind-wave conditions. The results demonstrate the capability of our model to accurately estimate both the instantaneous and area-aggregate viscous stresses for unseen wind-wave regimes. The proposed CNN-based wall-layer model offers a viable pathway for estimating the local and averaged skin friction drag in met-ocean simulations.more » « less
-
Pore-resolved direct numerical simulations (DNS) are used to investigate the interactions between stream-water flow turbulence and groundwater flow through a porous sediment bed in the hyporheic zone. Two permeability Reynolds numbers (2.56 and 5.17), representative of aquatic systems and representing ratio of permeability to viscous length scales, were simulated to understand its influence on the momentum exchange at the sediment-water interface (SWI). A doubleaveraging methodology is used to compute the Reynolds stresses, form-induced stresses, and pressure fluctuations. It is observed that both shear layer and turbulent shear stress penetration increases with ReK. Reynolds and form-induced bed-normal stresses increase with ReK. The peak values of the form-induced stresses for the lower (2.56) and higher (5.17) ReK happen within the top layer of the sediment bed. The sum of turbulent and form-induced pressure fluctuations, analyzed at their respective zero-displacement planes, are statistically similar and can be well approximated by a t location-scale distribution fit providing with a model that could potentially be used to impose boundary conditions at the SWI in reach scale simulations.more » « less
-
There has been an increase in recognition of the important role that the boundary layer turbulent flow structure has on wake recovery and concomitant wind farm efficiency. Most research thus far has focused on onshore wind farms, in which the ground surface is static. With the expected growth of offshore wind farms, there is increased interest in turbulent flow structures above wavy, moving surfaces and their effects on offshore wind farms. In this study, experiments are performed to analyze the turbulent structure above the waves in the wake of a fixed-bottom model wind farm, with special emphasis on the conditional averaged Reynolds stresses, using a quadrant analysis. Phase-averaged profiles show a correlation between the Reynolds shear stresses and the curvature of the waves. Using a quadrant analysis, Reynolds stress dependence on the wave phase is observed in the phase-dependent vertical position of the turbulence events. This trend is primarily seen in quadrants 1 and 3 (correlated outward and inward interactions). Quantification of the correlation between the Reynolds shear stress events and the surface waves provides insight into the turbulent flow mechanisms that influence wake recovery throughout the wake region and should be taken into consideration in wind turbine operation and placement.more » « less
-
We employ numerically implicit subgrid-scale modeling provided by the well-known streamlined upwind/Petrov–Galerkin stabilization for the finite element discretization of advection–diffusion problems in a Large Eddy Simulation (LES) approach. Whereas its original purpose was to provide sufficient algorithmic dissipation for a stable and convergent numerical method, more recently, it has been utilized as a subgrid-scale (SGS) model to account for the effect of small scales, unresolvable by the discretization. The freestream Mach number is 2.5, and direct comparison with a DNS database from our research group, as well as with experiments from the literature of adiabatic supersonic spatially turbulent boundary layers, is performed. Turbulent inflow conditions are generated via our dynamic rescaling–recycling approach, recently extended to high-speed flows. Focus is given to the assessment of the resolved Reynolds stresses. In addition, flow visualization is performed to obtain a much better insight into the physics of the flow. A weak compressibility effect is observed on thermal turbulent structures based on two-point correlations (IC vs. supersonic). The Reynolds analogy (u′ vs. t′) approximately holds for the supersonic regime, but to a lesser extent than previously observed in incompressible (IC) turbulent boundary layers, where temperature was assumed as a passive scalar. A much longer power law behavior of the mean streamwise velocity is computed in the outer region when compared to the log law at Mach 2.5. Implicit LES has shown very good performance in Mach 2.5 adiabatic flat plates in terms of the mean flow (i.e., Cf and UVD+). iLES significantly overpredicts the peak values of u′, and consequently Reynolds shear stress peaks, in the buffer layer. However, excellent agreement between the turbulence intensities and Reynolds shear stresses is accomplished in the outer region by the present iLES with respect to the external DNS database at similar Reynolds numbers.more » « less
- Free Publicly Accessible Full Text
-
Accepted Manuscript1.0
- Journal Article:
- https://doi.org/10.1063/5.0156963
