More Like this

1. Porous Organic Cages-Stabilized Carbon Molecular Sieve for Efficient Gas Separation

   Sharif, Usman; Kowey, Isha; Rownaghi, Ali (November 2023, 2023 AIChE Annual Meeting)

   Here we present results of gas selectivity and diffusion of different gases (C2H6, C2H4, C3H8, C3H6, H2, N2, CO2, and CH4) in porous organic cages (POCs) incorporated into fluorinated copolyimides polymers (FCPs). The FCPs were synthesized by the thermal and chemical imidization reaction of fluorinated dianhydrides, nonfluorinated dianhydride, and nonfluorinated diamine. Asymmetric hollow fiber membranes formed by the dry-jet/wet-quench spinning process. Once fresh FCP fibers were synthesized, they were crosslinked with POCs, vacuum dried at 90 °C. We investigated the uptake, gas selectivity and diffusion of different gases (C3H8, C3H6, CO2, and H2) over synthesized POC-mixed matrixed membranes (POC-MMM) at 25 °C and pressures up to 1 bar. At 1 bar and 25 °C, C3H8, C3H6 adsorption capacities reached 2.77 and 2.65 mmol/g over POC-MMM, respectively, while CO2, CH4, CO, N2 and H2 adsorption capacities of 1.48, 0.84, 0.33, 0.11, and 0.068 mmol/g, respectively. Furthermore, stable CMS membrane was formed by pyrolysis of POC-MMMs under an inert argon atmosphere at 1 atm. To test the gas transport properties of CMS-derived POC/MMM, a lab-scale hollow fiber module with two-five fibers was constructed. The results of longer-term operation of synthesized CMS membrane that was continuously operated for 264 h (10 days) with an equimolar binary H2/CO2, CH4/CO2 and C3H6/C3H8 feed at 25°C and 1 bar feed pressure. The modification yielded promising results in the reduction of physical aging of CMS membranes. 

   more » « less
2. Teaching Old Polymers New Tricks: Improved Synthesis and Anomalous Crystallinity for a Lost Semi‐Fluorinated Polyaryl Ether via Interfacial Polymerization of Hexafluoroacetone Hydrate and Diphenyl Ether

   https://doi.org/10.1002/marc.202200737  

   Muñoz, Gustavo; Chamberlain, Kari M.; Athukorale, Sumudu; Ma, Guorong; Gu, Xiaodan; Pittman, Jr., Charles U.; Smith, Jr., Dennis W. (October 2022, Macromolecular Rapid Communications)

   Abstract A practical and direct electrophilic polymerization of hexafluoroacetone hydrate with diphenyl ether toward the preparation of semi‐fluorinated polyaryl ethers (PAE) is reported. Electrophilic aromatic substitution (EAS) polymerization under interfacial conditions with phase transfer catalyst (Aliquat 336) proceeds in trifluoromethanesulfonic anhydride by generation of trifluoromethanesulfonic acid and the protonated hexafluoroacetone (HFA) in situ affording 1,1,1,3,3,3‐hexafluoroisopropylidene (6F) PAE with high regioselectivity (4,4’‐DPE) and high molecular weight (≈60 kDa). Although first reported in a 1966 US Patent by DuPont using harsh conditions, improved synthetic methods or modern characterization has not been disclosed until now. Despite the presence of the 6F group, known to impart disordered morphology, this simple semi‐fluorinated PAE exhibits anomalous crystallinity with polymorphic melting points (T_m) ranging from 230–309 °C, high solubility in common organic solvents, a glass transition (T_g) of 163 °C, and thermo‐oxidative stability above 500 °C. Tough optically clear films prepared from solution give transmittance higher than 90% throughout the visible region. Synthesis, mechanistic aspects, and characterization including surface and dielectric properties are discussed. 

   more » « less
3. Carbon Molecular Sieve-derived POC/Mixed-Matrix Membranes for Gas Separation

   kowey, Isha; Rownaghi, Ali (May 2023, North American Membrane Society 2023)

   Membrane-based separations offer the potential for the lowest energy demand requirements of all separation options. Among all nanoporous membranes, the carbon molecular sieves (CMS), metal-organic frameworks (MOFs), and mixed-matrix membranes (MMMs) with angstrom level molecular discrimination properties makes them appealing for separating a wide spectrum of gas-pairs. Here we present results of gas selectivity and diffusion of different gases (C2H6, C2H4, C3H8, C3H6, H2, N2, CO2, and CH4) in porous organic cages (POCs) incorporated into fluorinated copolyimides polymers (FCPs). The FCPs were synthesized by the iridization reaction of fluorinated dianhydrides, nonfluorinated dianhydride, and nonfluorinated diamine. Asymmetric hollow fiber membranes formed by the dry-jet/wet-quench spinning process. Once fresh FCP fibers were synthesized, they were crosslinked with POCs, vacuum dried at 90 °C. We investigated the uptake, gas selectivity and diffusion of different gases (C2H6, C2H4, C3H8, C3H6, H2, N2, CO2, and CH4) over synthesized POC-mixed matrixed membranes (POC-MMM) at 25 °C and pressures up to 1 bar. At 1 bar and 25 °C, C2H6, C2H4, C3H8, C3H6 adsorption capacities reached to 42.61, 2.56, 2.77 and 2.65 mmol/g over POC-MMM, respectively, while CO2, CH4, CO, N2 and H2 adsorption capacities of 1.48, 0.84, 0.33, 0.11, and 0.068 mmol/g, respectively. Furthermore, stable CMS membrane were formed by pyrolysis of POC-MMMs under an inert argon atmosphere at 1 atm. To test the gas transport properties of CMS-derived POC/MMM, a lab-scale hollow fiber module with two-five fibers was constructed. The results of longer-term operation of synthesized CMS membrane that was continuously operated for 264 h (10 days) with an equimolar binary H2/CO2, CH4/CO2 and C3H6/C3H8 feed at 25°C and 1 bar feed pressure. The modification yielded promising results in the reduction of physical aging of CMS membranes. 

   more » « less
4. Thermal air oxidation changes surface and adsorptive properties of black carbon (char/biochar)

   Feng Xiao, Alemayehu H. (January 2018, Science of the total environment)

   In this study, we systematically investigated the effects of thermal air oxidation on the properties of biomass-derived BC made at carbonization temperatures (HTTs) of 300–700 ˚C. BC produced by including air in the carbonization step was found to have a low surface area and underdeveloped pore structure. Substantial changes of BC were observed after post-pyrolysis thermal air oxidation (PPAO). Well-carbonized BC samples made anoxically at relatively high HTTs (600 and 700 ˚C) showed, after PPAO, significant increases in N2 BET surface area (SA) (up to 700 times), porosity (< 60 Å) (up to 95 times), and adsorptivity (up to 120 times) of neutral organic species including two triazine herbicides and one natural estrogen. Partially carbonized BC made at a lower HTT (300 or 400 ˚C) showed moderate increases in these properties after PPAO, but a large increase in the intensity of Fourier transform infrared spectroscopy bands corresponding to various oxygen-containing functional groups. Well-carbonized BC samples, on the other hand, were deficient in surface oxygen functionality even after the PPAO treatment. Adsorption of the test organic compounds on BC generally trended with BET SA when it was less than 300 m2/g, but BET SA was poorly predictive of adsorption when it was greater than 300 m2/g. Overall, our results suggest that thermal reactions between molecular oxygen and BC 1) increase surface oxygen functionality more effectively for low-HTT than for high-HTT BC samples; 2) increase SA and porosity (< 60 Å) especially for high-HTT BC samples; and 3) create new adsorption sites and/or relieve steric restriction of organic molecules to micropores, thereby enhancing the adsorptivity of BC. These results will prove useful not only for understanding the fate of environmental BC but also in devising strategies for improving the practical performance of the engineered form of BC (i.e., biochar). 

   more » « less
5. Remediation of Aqueous Phosphate Agricultural Runoff Using Slag and Al/Mg Modified Biochar

   https://doi.org/10.3390/pr10081561  

   Crisler, Glenn B.; Hernandez, Cintly Guzman; Orr, Andre; Davis, Roger; Schauwecker, Timothy; Johnson, J. Casey; Sparks, Darrell; Brown, Ashli; Wilding, Kelcie; Navarathna, Chanaka; et al (August 2022, Processes)

   Slag and Al/Mg oxide modified Douglas fir biochar (AMOB) were compared for their phosphate adsorbing abilities for use individually or in combination for simulated agriculture run-off remediation in wetlands. Aqueous batch and column sorption experiments were performed for both low-cost materials. AMOB was prepared in bulk using a novel green method. Material analyses included XRD, elemental analysis, SEM, EDX, and BET. Biochar and slag have different phosphate removal mechanisms. In short residence times (≤2 h), adsorption phenomena dominate for both adsorbents. Surface area likely plays a role in adsorption performance; slag was measured to be 4.1 m2/g while biochar’s surface area was 364.1 m2/g. In longer residence times (>2 h), the slow leaching of metals (Ca, Al, and Mg) from slag continue to remove phosphate through the precipitation of metal phosphates. In 24 h, slag removed more free phosphate from the solution than AMOB. Preliminary fixed bed column adsorption of slag or AMOB alone and in tandem was performed adopting a scaled-up model that can be used to remediate agricultural runoff with high phosphate content. Additionally, a desorption study was performed to analyze the efficiency of material regeneration. While AMOB does not release any adsorbed phosphates, slag slowly releases 5.7% adsorbed phosphate over seven days. 

   more » « less