An official website of the United States government
Control of an articulated spine is important for humanoids' dynamic and balanced motion. Although there have been many spinal structures for humanoids, their actuation is still limited due to the usage of geared motors for joints. This paper introduces position control of a distributed electromechanical spine in a vertical plane. The spine dynamics model is approximated as an open chain. Gravitational and spring torques are compensated for the control. Moreover, torque-to-current conversion for the actuator is developed. Experimental results show the implemented control of the electromechanical spine for undulatory motions.
more »
« less
Modeling and Control of a Bioinspired, Distributed Electromechanical Actuator System Emulating a Biological Spine
The robotic spine has a lot of potential for snake-like, quadruped, and humanoid robots, as it can improve their mobility, flexibility, and overall function. A common approach to developing an articulated spine uses geared motors to imitate vertebrae. Instead of using geared motors that rotate 360 degree, a bioinspired gearless electromechanical actuator was proposed and developed as an alternative, specifically for humanoid spine applications. The actuator trades off angular flexibility for torque, while the geared motor trades off speed for torque. This article compares the proposed actuator and conventional geared motors regarding torque, acceleration, and copper loss for a vertebra's angular flexibility. When its angular flexibility is lower than 14∘, the proposed actuator achieves higher torque capability without gears than with conventional motors. Lower angular flexibility, which means smaller airgaps, allows the proposed actuator to produce a much stronger torque for the same input power. The actuator's nonlinear electrical and mechanical dynamics models are developed and used for position control of a six-module distributed spine. In addition, two different position-control architectures are developed: an outer loop proportional-integral (PI) position controller with an inner loop PI current controller and an outer loop PI position controller with an inner loop PI torque controller.
more »
« less
- Award ID(s):
- 1943791
- PAR ID:
- 10569328
- Publisher / Repository:
- IEEE/ASME Transactions on Mechatronics
- Date Published:
- Journal Name:
- IEEE/ASME Transactions on Mechatronics
- ISSN:
- 1083-4435
- Page Range / eLocation ID:
- 1 to 13
- Subject(s) / Keyword(s):
- Actuators , Motors , Torque , Robots , Coils , Stress , Gears
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
This article addresses the quadrotors’ safety-critical landing control problem with external uncertainties and collision avoidance. A geometrically robust hierarchical control strategy is proposed for an underactuated quadrotor, which consists of a slow outer loop controlling the position and a fast inner loop regulating the attitude. First, an estimation error quantified (EEQ) observer is developed to identify and compensate for the target’s linear acceleration and the translational disturbances, whose estimation error has a nonnegative upper bound. Furthermore, an outer-loop controller is designed by embedding the EEQ observer and control barrier functions (CBFs), in which the negative effects of external uncertainties, collision avoidance, and input saturation are thoroughly considered and effectively attenuated. For the inner-loop subsystem, a geometric controller with a robust integral of the sign of the error (RISE) control structure is developed to achieve disturbances rejection and asymptotic attitude tracking. Based on Lyapunov techniques and the theory of cascade systems, it is rigorously proven that the closed-loop system is uniformly ultimately bounded. Finally, the effectiveness of the proposed control strategy is demonstrated through numerical simulations and hardware experiments.more » « less
-
Abstract Accurate control of a humanoid robot's global position (i.e., its three-dimensional (3D) position in the world) is critical to the reliable execution of high-risk tasks such as avoiding collision with pedestrians in a crowded environment. This paper introduces a time-based nonlinear control approach that achieves accurate global-position tracking (GPT) for multi-domain bipedal walking. Deriving a tracking controller for bipedal robots is challenging due to the highly complex robot dynamics that are time-varying and hybrid, especially for multi-domain walking that involves multiple phases/domains of full actuation, over actuation, and underactuation. To tackle this challenge, we introduce a continuous-phase GPT control law for multi-domain walking, which provably ensures the exponential convergence of the entire error state within the full and over actuation domains and that of the directly regulated error state within the underactuation domain. We then construct sufficient multiple-Lyapunov stability conditions for the hybrid multi-domain tracking error system under the proposed GPT control law. We illustrate the proposed controller design through both three-domain walking with all motors activated and two-domain gait with inactive ankle motors. Simulations of a ROBOTIS OP3 bipedal humanoid robot demonstrate the satisfactory accuracy and convergence rate of the proposed control approach under two different cases of multi-domain walking as well as various walking speed and desired paths.more » « less
-
In this paper, an integral sliding mode current controller (SMC) is proposed for mutually coupled switched reluctance motors (MCSRM) using asymmetric bridge converters aiming to achieve constant switching frequency and lower sampling rate. A generalized state-space model is built and then the design of a sliding mode controller along with the stability analysis of the closed-loop system are presented. The effectiveness of SMC is verified using simulation studies with a three-phase, sinusoidal excitation 12/8 MCSRM over a wide speed range. Compared to the hysteresis current control, the proposed SMC-based design approach demonstrates a comparable response in terms of currents ripples, the root-mean-square error of current and torque while achieving a constant switching frequency and lower sampling rate.more » « less
-
In this paper, an integral sliding mode current controller (SMC) is proposed for mutually coupled switched reluctance motors (MCSRM) using asymmetric bridge converters aiming to achieve constant switching frequency and lower sampling rate. A generalized state-space model is built and then the design of a sliding mode controller along with the stability analysis of the closed-loop system are presented. The effectiveness of SMC is verified using simulation studies with a three-phase, sinusoidal excitation 12/8 MCSRM over a wide speed range. Compared to the hysteresis current control, the proposed SMC based design approach demonstrates a comparable response in terms of currents ripples, the root-mean-square error of current and torque while achieving a constant switching frequency and lower sampling rate.more » « less
- Free Publicly Accessible Full Text
-
Accepted Manuscript1.0
- Journal Article:
- https://doi.org/10.1109/TMECH.2024.3409696
