An official website of the United States government
Chatter, a self-excited vibration phenomenon, is a critical challenge in high-speed machining operations, affecting tool life, product surface quality, and overall process efficiency. While machine learning models trained on simulated data have shown promise in detecting chatter, their real-world applicability remains uncertain due to discrepancies between simulated and actual machining environments. The primary goal of this study is to bridge the gap between simulation-based machine learning models and real-world applications by developing and validating a Random Forest-based chatter detection system. This research focuses on improving manufacturing efficiency through reliable chatter detection by integrating Operational Modal Analysis (OMA), Receptance Coupling Substructure Analysis (RCSA), and Transfer Learning (TL). The study applies a Random Forest classification model trained on over 140,000 simulated machining datasets, incorporating techniques like Operational Modal Analysis (OMA), Receptance Coupling Substructure Analysis (RCSA), and Transfer Learning (TL) to adapt the model for real-world operational data. The model is validated against 1600 real-world machining datasets, achieving an accuracy of 86.1%, with strong precision and recall scores. The results demonstrate the model’s robustness and potential for practical implementation in industrial settings, highlighting challenges such as sensor noise and variability in machining conditions. This work advances the use of predictive analytics in machining processes, offering a data-driven solution to improve manufacturing efficiency through more reliable chatter detection.
more »
« less
Applicable and generalizable machine learning for intelligent welding in automotive manufacturing
Abstract This review paper examines the application and challenges of machine learning (ML) in intelligent welding processes within the automotive industry, focusing on resistance spot welding (RSW) and laser welding. RSW is predominant in body-in-white assembly, while laser welding is critical for electric vehicle battery packs due to its precision and compatibility with dissimilar materials. The paper categorizes ML applications into three key areas: sensing, in-process decision-making, and post-process optimization. It reviews supervised learning models for defect detection and weld quality prediction, unsupervised learning for feature extraction and data clustering, and emerging generalizable ML approaches like transfer learning and federated learning that enhance adaptability across different manufacturing conditions. Additionally, the paper highlights the limitations of current ML models, particularly regarding generalizability when moving from lab environments to real-world production, and discusses the importance of adaptive learning techniques to address dynamically changing conditions. Case studies like virtual sensing, defect detection in RSW, and optimization in laser welding illustrate practical applications. The paper concludes by identifying future research directions to improve ML adaptability and robustness in high-variability manufacturing environments, aiming to bridge the gap between experimental ML models and real-world implementation in automotive welding.
more »
« less
- Award ID(s):
- 2237242
- PAR ID:
- 10570551
- Publisher / Repository:
- Springer Science + Business Media
- Date Published:
- Journal Name:
- Welding in the World
- Volume:
- 69
- Issue:
- 5
- ISSN:
- 0043-2288
- Format(s):
- Medium: X Size: p. 1349-1384
- Size(s):
- p. 1349-1384
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
Abstract Machine learning (ML) models are used for in-situ monitoring in additive manufacturing (AM) for defect detection. However, sensitive information stored in ML models, such as part designs, is at risk of data leakage due to unauthorized access. To address this, differential privacy (DP) introduces noise into ML, outperforming cryptography, which is slow, and data anonymization, which does not guarantee privacy. While DP enhances privacy, it reduces the precision of defect detection. This paper proposes combining DP with Hyperdimensional Computing (HDC), a brain-inspired model that memorizes training sample information in a large hyperspace, to optimize real-time monitoring in AM while protecting privacy. Adding DP noise to the HDC model protects sensitive information without compromising defect detection accuracy. Our studies demonstrate the effectiveness of this approach in monitoring anomalies, such as overhangs, using high-speed melt pool data analysis. With a privacy budget set at 1, our model achieved an F-score of 94.30%, surpassing traditional models like ResNet50, DenseNet201, EfficientNet B2, and AlexNet, which have performance up to 66%. Thus, the intersection of DP and HDC promises accurate defect detection and protection of sensitive information in AM. The proposed method can also be extended to other AM processes, such as fused filament fabrication.more » « less
-
Abstract Resistance Spot Welding (RSW) is one of the largest automated manufacturing processes in industry, consequently making it also one of the most researched. While this ubiquity has led to advancements in the consistency of this process, RSW is innately uncertain due to the high degree of interplaying mechanics that occur during the process. Additionally, to ensure the quality of a completed weld empirically, expensive analysis tools are required to inspect the result. One solution to removing this monetary and temporal cost is in-line process monitoring. During the weld, various signals can be measured and evaluated to predict the weld quality in real-time. The most common signal to measure is the Dynamic Resistance (DR) due to its ease of sensor implementation and richness of information. Other common signals are the electrode force and displacement. These give a more inclusive look into the overall process, especially the mechanical aspects, but these are typically limited to lab settings due to the increased cost of deploying them at scale. One solution to realize the insight of these other process signals on the factory floor is to utilize Machine Learning techniques to create virtual sensors that convert extant sensing data to other domains. This would allow for more robust and interpretable signal processing without incurring additional costs or downtime.more » « less
-
Abstract Wire arc additive manufacturing (WAAM) has gained attention as a feasible process in large-scale metal additive manufacturing due to its high deposition rate, cost efficiency, and material diversity. However, WAAM induces a degree of uncertainty in the process stability and the part quality owing to its non-equilibrium thermal cycles and layer-by-layer stacking mechanism. Anomaly detection is therefore necessary for the quality monitoring of the parts. Most relevant studies have applied machine learning to derive data-driven models that detect defects through feature and pattern learning. However, acquiring sufficient data is time- and/or resource-intensive, which introduces a challenge to applying machine learning-based anomaly detection. This study proposes a multisource transfer learning method that generates anomaly detection models for balling defect detection, thus ensuring quality monitoring in WAAM. The proposed method uses convolutional neural network models to extract sufficient image features from multisource materials, then transfers and fine-tunes the models for anomaly detection in the target material. Stepwise learning is applied to extract image features sequentially from individual source materials, and composite learning is employed to assign the optimal frozen ratio for converging transferred and present features. Experiments were performed using a gas tungsten arc welding-based WAAM process to validate the classification accuracy of the models using low-carbon steel, stainless steel, and Inconel.more » « less
-
Laser beam powder bed fusion (LB-PBF) is a widely-used metal additive manufacturing process due to its high potential for fabrication flexibility and quality. Its process and performance optimization are key to improving product quality and promote further adoption of LB-PBF. In this article, the state-of-the-art machine learning (ML) applications for process and performance optimization in LB-PBF are reviewed. In these applications, ML is used to model the process-structure–property relationships in a data-driven way and optimize process parameters for high-quality fabrication. We review these applications in terms of their modeled relationships by ML (e.g., process—structure, process—property, or structure—property) and categorize the ML algorithms into interpretable ML, conventional ML, and deep ML according to interpretability and accuracy. This way may be particularly useful for practitioners as a comprehensive reference for selecting the ML algorithms according to the particular needs. It is observed that of the three types of ML above, conventional ML has been applied in process and performance optimization the most due to its balanced performance in terms of model accuracy and interpretability. To explore the power of ML in discovering new knowledge and insights, interpretation with additional steps is often needed for complex models arising from conventional ML and deep ML, such as model-agnostic methods or sensitivity analysis. In the future, enhancing the interpretability of ML, standardizing a systemic procedure for ML, and developing a collaborative platform to share data and findings will be critical to promote the integration of ML in LB-PBF applications on a large scale.more » « less
