An official website of the United States government
Abstract Shear wave splitting (SWS) patterns at subduction zones are often interpreted by complex mantle flow above or below the slab. However, our recent previous work shows dipping anisotropic slabs can explain observed patterns in Japan. Here, we extend this analysis to the Alaska subduction zone, using 2,567 high‐quality teleseismic SWS measurements from 195 broadband stations. As was found in Japan, the observed SWS patterns in Alaska depend on earthquake backazimuth. The fast‐S polarization directions are either trench parallel or perpendicular in southeastern Alaska and form a prominent circular pattern in central Alaska. We found that a dipping anisotropic slab following the Slab 2.0 geometry, with 30% shear anisotropy, and exhibiting tilted transverse isotropy with a symmetry axis normal to the slab interface, predicts both the fast‐S polarizations and delay times (δt = 1.0–1.5 s). This suggests that intra‐slab anisotropy can be the primary control on SWS, without requiring complex mantle flow.
more »
« less
Prediction of Complex Observed Shear Wave Splitting Patterns at Ryukyu Subduction Zone Using a Strong Intra‐Slab Anisotropy Model
Abstract Complex shear wave splitting (SWS) patterns in subduction zones are often interpreted geodynamically as resulting from complex mantle flow; however, this may not always be necessary. We analyzed 7,093 high‐quality SWS measurements from teleseismic S waves recorded by Hi‐net stations across the Ryukyu arc in Japan. Our findings show a systematic rotation of the fast S polarization from trench‐parallel to trench‐perpendicular depending on the earthquake backazimuth. For the same earthquake, the measured splitting patterns also vary spatially across the southwest Japan. Using full‐wave seismic modeling, we showed that a dipping slab with ∼30% shear anisotropy of the tilted transverse isotropy (TTI) type, with a symmetry axis perpendicular to the slab interface, can predict the observed delay times and polarization rotation. Our results highlight the importance of considering dipping anisotropic slabs in interpreting SWS at subduction zones.
more »
« less
- Award ID(s):
- 2027150
- PAR ID:
- 10571288
- Publisher / Repository:
- DOI PREFIX: 10.1029
- Date Published:
- Journal Name:
- Geophysical Research Letters
- Volume:
- 52
- Issue:
- 3
- ISSN:
- 0094-8276
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
SUMMARY The Alaska–Aleutian subduction zone represents an ideal location to study dynamics within a mantle wedge. The subduction system spans several thousand kilometres, is characterized by a slab edge, and has ample seismicity. Additionally, the majority of islands along the arc house broad-band seismic instruments. We examine shear wave splitting of local-S phases originating along the length of the subduction zone. We have dense measurement spacing in two regions, the central Aleutians and beneath Alaska. Beneath Alaska, we observe a rotation in fast splitting directions near the edge of the subducting slab. Fast directions change from roughly trench perpendicular away from the slab edge to trench parallel near the boundary. This is indicative of toroidal flow around the edge of the subducting Alaska slab. In the central Aleutians, local-S splitting is primarily oriented parallel to, or oblique to, the strike of the trench. The local-S measurements, however, exhibit a depth dependence where deeper events show more consistently trench-parallel directions indicating prevalent trench-parallel mantle flow. Our local-S shear wave splitting results suggest trench-parallel orientation are likely present along much of the subduction zone excited by the slab edge, but that additional complexities exist along strike.more » « less
-
Abstract This study represents the first campaign‐style teleseismic shear wave splitting (SWS) investigation of central Myanmar, an area that is tectonically controlled by the oblique subduction of the Indian Plate underneath the Eurasian Plate. The resulting 678 well‐defined and 247 null SWS measurements obtained from recently deployed 71 broadband seismic stations show that the Indo‐Burma Ranges (IBR) possess mostly N‐S fast orientations that are parallel to the trend of the depth contours of the subducted slab. Relative to the global average of 1.0 s, extremely large splitting times with station‐averaged values ranging from 1.28 to 2.79 s and an area‐averaged value of 2.09 ± 0.55 s are observed in the IBR. In contrast, the Central Basin (CB) and the Shan Plateau (SP) are characterized by slightly larger than normal splitting times. The fast orientations observed in the CB are mostly NE‐SW in the northern part of the study area, N‐S in the central part, and NW‐SE in the southern part. The fast orientations change from nearly N‐S along the N‐S oriented Sagaing Fault, to NW‐SE in the central and eastern portions of the SP. These observations, together with SWS measurements using local S events, crustal anisotropy measurements using P‐to‐S receiver functions, and the estimated depth of the source of anisotropy using the spatial coherency of the splitting parameters, suggest the presence of a trench‐parallel sub‐slab flow system driven by slab rollback, a trench‐perpendicular corner flow, and a trench‐parallel flow possibly entering the mantle wedge through a slab window or gap.more » « less
-
Abstract Using numerical models, we compute the evolution of the mantle flow field and the crystal preferred orientation (CPO) of mineral aggregates in the mantle wedge of generic subduction systems from their nascent to mature stage and investigate shear wave splitting (SWS) through the forearc mantle wedge corner and overriding crust. Upon subduction initiation, the maximum depth of slab‐mantle decoupling (MDD) is relatively shallow (∼20 km depth), resulting in mantle flow and CPO development in the wedge corner. As subduction continues, the MDD deepens, the wedge corner cools and stagnates, and the olivine CPO becomes frozen‐in. In the cool wedge corner, antigorite can form if water is available. In non‐deforming mantle, antigorite CPO develops relative to the host olivine CPO through topotactic growth. We calculate splitting parameters of synthetic local S waves based on the model‐predicted A‐ and B‐type olivine CPOs and topotactically grown antigorite CPO that replaces A‐type olivine CPO in the wedge corner. The fast direction is trench‐normal for A‐type olivine and antigorite CPOs and trench‐parallel for B‐type. When the delay times are long enough (>0.1 s), we find them positively correlated with the thickness of the mantle wedge corner. In NE Japan, where the results of detailed analyses on the spatial variation of the SWS parameters are available, such correlation is not observationally reported. However, the addition of an anisotropic overriding crust provides delay times (∼0.1 s) and trench‐normal fast directions that are consistent with the local SWS observations.more » « less
-
SUMMARY Increasing evidence from seismic methods shows that anisotropy within subduction zones should consist of multiple layers. To test this, we calculate and model shear wave splitting across the Alaska-Aleutians Subduction Zone (AASZ), where previous studies have argued for separate layers of anisotropy in the subslab, slab and mantle wedge. We present an updated teleseismic splitting catalogue along the span of the AASZ, which has many broad-band seismometers recently upgraded to three components. Splitting observations are sparse in the Western Aleutians, and fast directions are oriented generally trench parallel. There are significantly more splitting measurements further east along the AASZ. We identify six regions in the Central and Eastern Aleutians, Alaskan Peninsula and Cook Inlet with a high density of splits suitable for multilayered anisotropy analyses. These regions were tested for multilayer anisotropy, and for five of the six regions we favour multiple layers over a single layer of anisotropy. We find that the optimal setup for our models is one with a dipping middle layer oriented parallel to palaeospreading. A prominent feature of our modelling is that fast directions above and below the dipping layer are generally oriented parallel to the strike of the slab. Additionally, we lay out a framework for robust and statistically reliable multilayer shear wave splitting modelling.more » « less
