Self-assembly of molecular multilayers via metal ion linkages has become an important strategy for interfacial engineering of metalloid and metal oxide (MOx) substrates, with applications in numerous areas, including energy harvesting, catalysis, and chemical sensing. An important aspect for the rational design of these multilayers is knowledge of the molecular structure–function relationships. For example, in a multilayer composed of different chromophores in each layer, the molecular orientation of each layer, both relative to the adjacent layers and the substrate, influences the efficiency of vectorial energy and electron transfer. Here, we describe an approach using UV–vis attenuated total reflection (ATR) spectroscopy to determine the mean dipole tilt angle of chromophores in each layer in a metal ion-linked trilayer self-assembled on indium-tin oxide. To our knowledge, this is the first report demonstrating the measurement of the orientation of three different chromophores in a single assembly. The ATR approach allows the adsorption of each layer to be monitored in real-time, and any changes in the orientation of an underlying layer arising from the adsorption of an overlying layer can be detected. We also performed transient absorption spectroscopy to monitor interlayer energy transfer dynamics in order to relate structure to function. We found that near unity efficiency, sub-nanosecond energy transfer between the third and second layer was primarily dictated by the distance between the chromophores. Thus, in this case, the orientation had minimal impact at such proximity.
more »
« less
Structural insights to metal ion linked multilayers on metal oxide surfaces via energy transfer and polarized ATR measurements
Metal ion linked multilayers offer a means of controlling interfacial energy and electron transfer for a range of applications including solar energy conversion, catalysis, sensing, and more. Despite the importance of structure to these interlayer transfer processes, little is known about the distance and orientation between the molecules/surface of these multilayer films. Here we gain structural insights into these assemblies using a combination of UV-Vis polarized visible attenuated total reflectance (p-ATR) and Förster Resonance Energy Transfer (FRET) measurements. The bilayer of interest is composed of a metal oxide surface, phosphonated anthracene molecule, Zn(II) linking ion, and a platinum porphyrin with one (P1), two (P2), or three (P3) phenylene spacers between the chromophoric core and the metal ion binding carboxylate group. As observed by both time-resolved emission and transient absorption, the FRET rate and efficiency decreases with an increasing number of phenylene spacers (P1 > P2 > P3). However, from p-ATR measurements we observe a change in orientation of porphyrins in the bilayer, which inhibits a uniform determination of the orientation factor (κ2) across the series. Instead, we narrow the scope of viable structures by determining the best agreement between experimental and calculated FRET efficiencies. Additionally, we provide evidence that suggests, for the first time, that the bilayer structure is similar on both planar and mesoporous substrates.
more »
« less
- Award ID(s):
- 2327754
- PAR ID:
- 10572085
- Publisher / Repository:
- Royal Chemical Society
- Date Published:
- Journal Name:
- Journal of Materials Chemistry A
- Volume:
- 12
- Issue:
- 42
- ISSN:
- 2050-7488
- Page Range / eLocation ID:
- 28882 to 28891
- Subject(s) / Keyword(s):
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
Structural ensemble modeling of FRET and electron transfer rates in surface-bound molecular bilayersNot AvailableThe assembly of multiple molecules on inorganic surfaces is of interest for applications including solar cells, catalysis, and sensing. These typically rely on intermolecular electron/energy transfer which, in addition to energetics, are dictated by the structure of the assembly. Here we introduce a software package with a user-friendly graphical user interface that calculates interlayer FRET and electron transfer rates for surface-bound molecular bilayers. The output illustrates the energy and electron transfer rates with respect to measurable structural parameters, as well as a vector depiction of the possible bilayer structures. We include a few use cases that demonstrate the effects of varying the metal linking ion and solvent on energy and electron transfer rates in metal ion linked bilayers. While our focus is primarily on metal ion linked systems, we show how, with minor input modification, this software can be applied to covalently linked dyads or other bilayer assemblies on surfaces.more » « less
-
Metal-ion-linked molecular multilayers on metal oxide surfaces are promising for applications ranging from solar energy conversion to sensing. Most of these applications rely on energy and electron transfer between layers/molecules which can be envisioned to occur via intra-assembly (IA; between metal-ion-linked molecules) and interlayer (IL; between separate layers of nonlinked molecules) processes. Here, we describe our effort to differentiate between IL and IA energy transfer using a bilayer composed of ZrO2, a phosphonated anthracene derivative (A), a zinc(II) linking ion, and a Pt(II)porphyrin (P). Both time-resolved emission and transient absorption measurements show no impact of diluting the anthracene layer with a spectroscopically inert spacer on the rate of 1A* to P and 3P* to A, singlet, and triplet energy transfer, respectively. These results indicate that energy transfer within the metal-ion-linked assembly (i.e., ZrO2-A–Zn-P) is more rapid than with an adjacent, nonlinked A molecule, even for a P derivative capable of laying down on the surface. These insights are an important step toward structural design principles maximizing the efficiency/rate of energy transfer in multilayer assemblies.more » « less
-
null (Ed.)Since its first confirmed case at the end of 2019, COVID-19 has become a global pandemic in three months with more than 1.4 million confirmed cases worldwide, as of early April 2020. Quantifying the changes of pollutant emissions due to COVID-19 and associated governmental control measures is crucial to understand its impacts on economy, air pollution, and society. We used the WRF-GC model and the tropospheric NO2 column observations retrieved by the TROPOMI instrument to derive the top-down NOx emission change estimation between the three periods: P1 (January 1st to January 22nd, 2020), P2 (January 23rd, Wuhan lockdown, to February 9th, 2020), and P3 (February 10th, back-to-work day, to March 12th, 2020). We found that NOx emissions in East China averaged during P2 decreased by 50% compared to those averaged during P1. The NOx emissions averaged during P3 increased by 26% compared to those during P2. Most provinces in East China gradually regained some of their NOx emissions after February 10, the official back-to-work day, but NOx emissions in most provinces have not yet to return to their previous levels in early January. NOx emissions in Wuhan, the first epicenter of COVID-19, had no sign of emission recovering by March 12. A few provinces, such as Zhejiang and Shanxi, have recovered fast, with their averaged NOx emissions during P3 almost back to pre-lockdown levels.more » « less
-
Abstract Understanding the fluorescence resonance energy transfer (FRET) of metal nanoparticles at the atomic level has long been a challenge due to the lack of accurate systems with definite distance and orientation of molecules. Here we present the realization of achieving FRET between two atomically precise copper nanoclusters through cocrystallization-induced spatial confinement. In this study, we demonstrate the establishment of FRET in a cocrystallized Cu8(p-MBT)8(PPh3)4@Cu10(p-MBT)10(PPh3)4system by exploiting the overlapping spectra between the excitation of the Cu10(p-MBT)10(PPh3)4cluster and the emission of the Cu8(p-MBT)8(PPh3)4cluster, combined with accurate control over the confined space between the two nanoclusters. Density functional theory is employed to provide deeper insights into the role of the distance and dipole orientations of molecules to illustrate the FRET procedure between two cluster molecules at the electronic structure level.more » « less
An official website of the United States government

