An official website of the United States government
By-design access to laser wavelength, especially with integrated photonics, is critical to advance quantum sensors, such as optical clocks and quantum-information systems, and open opportunities in optical communication. Semiconductor-laser gain provides exemplary efficiency and integration but merely in developed wavelength bands. Alternatively, nonlinear optics requires control of phase matching, but the principle of nonlinear conversion of a pump laser to a designed wavelength is extensible. We report on laser-wavelength access by versatile customization of optical-parametric oscillation (OPO) with a photonic-crystal ring resonator (PhCR). Leveraging the exquisite control of laser propagation provided by a photonic crystal in a traveling-wave ring resonator, we enable OPO generation across a wavelength range of 1234–2093 nm with a 1550-nm pump and 1016–1110 nm with a 1064-nm pump. Moreover, our platform offers pump-to-sideband conversion efficiency of > 10 % and negligible additive optical-frequency noise across the output range. From laser design to simulation of nonlinear dynamics, we use a Lugiato–Lefever framework that predicts the system characteristics, including bidirectional OPO generation in the PhCR and conversion efficiency in agreement with our observations. Our experiments introduce broadband lasers by design with PhCR OPOs, providing critical functionalities in integrated photonics.
more »
« less
Nanopatterned parametric oscillators for laser conversion beyond an octave
Many uses of lasers place the highest importance on access to specific wavelength bands. For example, mobilizing optical-atomic clocks for a leap in sensing requires compact lasers at frequencies spread across the visible and near-infrared. Integrated photonics enables high-performance, scalable laser platforms. However, customizing laser-gain media to support wholly new bands is challenging and often prohibitively mismatched in scalability to early quantum-based sensing and information systems. Here, we demonstrate a tantalum pentoxide microresonator optical-parametric oscillator (OPO) that converts a pump laser to an output wave within a frequency span exceeding an octave. We control phase matching for oscillation by nanopatterning the microresonator to open a photonic-crystal bandgap on the mode of the pump laser. The photonic crystal splits only the pump mode and preserves the broader mode structure of the resonator, thus affording a single parameter to control output waves across the octave span using a nearly fixed frequency pump laser. We also demonstrate tuning the oscillator in free-spectral-range steps, more finely with temperature, and minimal additive frequency noise of the laser-conversion process. Our work shows that nanophotonic structures offer control of laser conversion in microresonators, bridging phase-matching of nonlinear optics and application requirements for laser designs.
more »
« less
- Award ID(s):
- 2016244
- PAR ID:
- 10574225
- Publisher / Repository:
- Optical Society of America
- Date Published:
- Journal Name:
- Optica
- Volume:
- 12
- Issue:
- 3
- ISSN:
- 2334-2536
- Format(s):
- Medium: X Size: Article No. 337
- Size(s):
- Article No. 337
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
Microresonator frequency combs and their design versatility have revolutionized research areas from data communication to exoplanet searches. While microcombs in the 1550 nm band are well documented, there is interest in using microcombs in other bands. Here, we demonstrate the formation and spectral control of normal-dispersion dark soliton microcombs at 1064 nm. We generate 200 GHz repetition rate microcombs by inducing a photonic bandgap of the microresonator mode for the pump laser with a photonic crystal. We perform the experiments with normal-dispersion microresonators made from Ta2O5 and explore unique soliton pulse shapes and operating behaviors. By adjusting the resonator dispersion through its nanostructured geometry, we demonstrate control over the spectral bandwidth of these combs, and we employ numerical modeling to understand their existence range. Our results highlight how photonic design enables microcomb spectra tailoring across wide wavelength ranges, offering potential in bioimaging, spectroscopy, and photonic-atomic quantum technologies.more » « less
-
Kerr-microresonator frequency combs in integrated photonics waveguides are promising technologies for next-generation positioning, navigation, and timing applications, with advantages that include platforms that are mass-producible and CMOS-compatible and spectra that are phase-coherent and octave-spanning. Fundamental thermal noise in the resonator material typically limits the timing and frequency stability of a microcomb. The small optical mode volume of the microresonators exaggerates this effect, as it both increases the magnitude and shortens the timescale of thermodynamic fluctuations. In this work, we investigate thermal instability in silicon nitride microring resonators as well as techniques for reducing their effects on the microcomb light. We characterize the time-dependent thermal response in silicon nitride microring resonators through experimental measurements and finite element method simulations. Through fast control of the pump laser frequency, we reduce thermal recoil due to heating. Finally, we demonstrate the utility of a coupled microresonator system with tunable mode interactions to increase the stability of a soliton against thermal shifts.more » « less
-
Abstract The generation of ultra-low-noise microwave and mmWave in miniaturized, chip-based platforms can transform communication, radar and sensing systems1–3. Optical frequency division that leverages optical references and optical frequency combs has emerged as a powerful technique to generate microwaves with superior spectral purity than any other approaches4–7. Here we demonstrate a miniaturized optical frequency division system that can potentially transfer the approach to a complementary metal-oxide-semiconductor-compatible integrated photonic platform. Phase stability is provided by a large mode volume, planar-waveguide-based optical reference coil cavity8,9and is divided down from optical to mmWave frequency by using soliton microcombs generated in a waveguide-coupled microresonator10–12. Besides achieving record-low phase noise for integrated photonic mmWave oscillators, these devices can be heterogeneously integrated with semiconductor lasers, amplifiers and photodiodes, holding the potential of large-volume, low-cost manufacturing for fundamental and mass-market applications13.more » « less
-
null (Ed.)By suppressing the conversion-back-conversion cycles typical of optical parametric processes through novel phase-matching schemes, octave-spanning frequency conversion and highly efficient parametric amplification can be achieved. Several recent developments will be reviewed.more » « less
