An official website of the United States government
Abstract Much confusion exists on whether force‐ or energy‐based descriptions of cohesive‐particle interactions are more appropriate. We hypothesize a force‐based description is appropriate when enduring‐contacts dominate and an energy‐based description when contacts are brief in nature. Specifically, momentum is transferred through force‐chains when enduring‐contacts dominate and particles need to overcome a cohesive force to induce relative motion, whereas particles experiencing brief contacts transfer momentum through collisions and must overcome cohesion‐enhanced energy losses to avoid agglomeration. This hypothesis is tested via an attempt to collapse the dimensionless, dependent variable characterizing a given system against two dimensionless numbers: A generalized bond number, BoG–ratio of maximum cohesive force to the force driving flow, and a new Agglomerate number, Ag–ratio of critical cohesive energy to the granular energy. A gamut of experimental and simulation systems (fluidized bed, hopper, etc.), and cohesion sources (van der Waals, humidity, etc.), are considered. For enduring‐contact systems, collapse occurs with BoGbut not Ag, and vice versa for brief‐contact systems, thereby providing support for the hypothesis. An apparent discrepancy with past work is resolved, and new insight into Geldart's classification is gleaned.
more »
« less
This content will become publicly available on February 25, 2026
The Roles of Size, Packing, and Cohesion in the Emergence of Force Chains in Granular Packings
Abstract This study investigates computationally the impact of particle size disparity and cohesion on force chain formation in granular media. The granular media considered in this study are bi-disperse systems under uniaxial compression, consisting of spherical, frictionless particles that interact through a modified Hookean model. Force chains in granular media are characterized as networks of particles that meet specific criteria for particle stress and inter-particle forces. The computational setup decouples the effects of particle packing on force chain formations, ensuring an independent assessment of particle size distribution and cohesion on force chain formation. The decoupling is achieved by characterizing particle packing through the radial density function, which enables the identification of systems with both regular and irregular packing. The fraction of particles in the force chains network is used to quantify the presence of the force chains. The findings show that particle size disparity promotes force chain formation in granular media with nearly-regular packing (i.e., an almost-ordered system). However, as particle size disparities grow, it promotes irregular packing (i.e., a disordered systems), leading to fewer force chains carrying larger loads than in ordered systems. Further, it is observed that the increased cohesion in granular systems leads to fewer force chains irrespective of particle size or packing.
more »
« less
- PAR ID:
- 10575299
- Publisher / Repository:
- ASME
- Date Published:
- Journal Name:
- Journal of Applied Mechanics
- ISSN:
- 0021-8936
- Page Range / eLocation ID:
- 1 to 10
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
Acoustic levitation in air provides a containerless, gravity-free platform for investigating driven many-particle systems with nonconservative interactions and underdamped dynamics. In prior work the interactions among levitated particles were limited to attractive forces from scattered sound and repulsion from hydrodynamic microstreaming. We report on experiments in which contact cohesion provides a third type of interaction. When particle size and separation are both much smaller than the sound wavelength, this interplay of three interactions results in forces that are attractive over several particle diameters, become repulsive at close approach, and are again attractive at contact. In the presence of sound-induced athermal fluctuations that generate particle collisions, the interplay of these three forces enables the formation of particle chains with anisotropic interactions that depend on chain size and shape due to multibody effects. With the control of the kinetic pathways and the strength of the contact cohesion, different patterns can be assembled, from triangular lattices to labyrinthine patterns of chains to lacelike networks of interconnected rings. These results shed light on the multibody character of acoustic interactions and can be utilized to direct the self-assembly of particles. Published by the American Physical Society2025more » « less
-
We investigate the submerged collapse of weakly polydisperse, loosely packed cohesive granular columns, as a function of aspect ratio and cohesive force strength, via grain-resolving direct numerical simulations. The cohesive forces act to prevent the detachment of individual particles from the main body of the collapsing column, reduce its front velocity, and yield a shorter and thicker final deposit. All of these effects can be captured accurately across a broad range of parameters by piecewise power-law relationships. The cohesive forces reduce significantly the amount of available potential energy released by the particles. For shallow columns, the particle and fluid kinetic energy decreases for stronger cohesion. For tall columns, on the other hand, moderate cohesive forces increase the maximum particle kinetic energy, since they accelerate the initial free-fall of the upper column section. Only for larger cohesive forces does the peak kinetic energy of the particles decrease. Computational particle tracking indicates that the cohesive forces reduce the mixing of particles within the collapsing column, and it identifies the regions of origin of those particles that travel the farthest. The simulations demonstrate that cohesion promotes aggregation and the formation of aggregates. Furthermore, they provide complete information on the temporally and spatially evolving network of cohesive and direct contact force bonds. While the normal contact forces are aligned primarily in the vertical direction, the cohesive bonds adjust their preferred spatial orientation throughout the collapse. They result in a net macroscopic stress that counteracts deformation and slows the spreading of the advancing particle front.more » « less
-
Abstract Frictional sliding along grain boundaries in brittle shear zones can result in the fragmentation of individual grains, which ultimately can impact slip dynamics. During deformation at small scales, stick–slip motion can occur between grains when existing force chains break due to grain rearrangement or failure, resulting in frictional sliding of granular material. The rearrangement of the grains leads to dilation of the granular package, reducing the shear stress and subsequently leading to slip. Here, we conduct physical experiments employing HydroOrbs, an elasto-plastic material, to investigate grain comminution in granular media under simple shear conditions. Our findings demonstrate that the degree of grain comminution is dependent on both the normal force and the size of the grains. Using the experimental setup, we benchmark Discrete Element Method (DEM) numerical models, which are capable of simulating the movement, rotation, and fracturing of elasto-plastic grains subjected to simple shear. The DEM models successfully replicate both grain comminution patterns and horizontal force fluctuations observed in our physical experiments. They show that increasing normal forces correlate with higher horizontal forces and more fractured grains. The ability of our DEM models to accurately reproduce experimental results opens up new avenues for investigating various parameter spaces that may not be accessible through traditional laboratory experiments, for example, in assessing how internal friction or cohesion affect deformation in granular systems.more » « less
-
Abstract Static granular packings play a central role in numerous industrial applications and natural settings. In these situations, fluid or fine particle flow through a bed of static particles is heavily influenced by the narrowest passage connecting the pores of the packing, commonly referred to as pore throats, or constrictions. Existing studies predominantly assume monodisperse rigid particles, but this is an oversimplification of the problem. In this work, we illustrate the connection between pore throat size, polydispersity, and particle deformation in a packed bed of spherical particles. Simple analytical expressions are provided to link these properties of the packing, followed by examples from Discrete Element Method (DEM) simulations of fine particle percolation demonstrating the impact of polydispersity and particle deformation. Our intent is to emphasize the substantial impact of polydispersity and particle deformation on constriction size, underscoring the importance of accounting for these effects in particle transport in granular packings.more » « less
