An official website of the United States government
The northwest-trending Altai Mountains of central Asia expose a complex network of thrust and strike-slip faults that are key features accommodating intracontinental crustal shortening related to the Cenozoic India-Asia collision. In this study, we investigated the Quaternary slip history of the Fuyun fault, a right-lateral strike-slip fault bounding the southwestern margin of the Altai Mountains, through geologic mapping, geomorphic surveying, and optically stimulated luminescence (OSL) geochronology. At the Kuoyibagaer site, the Fuyun fault displaces three generations of Pleistocene–Holocene fill-cut river terraces (i.e., T3, T2, and T1) containing landslide and debris-flow deposits. The right-lateral offsets are magnified by erosion of terrace risers, suggesting that river course migration has been faster than slip along the Fuyun fault. The highest Tp2 terrace was abandoned in the middle Pleistocene (150.4 ± 8.1 ka uppermost OSL age) and was displaced 145.5 +45.6/–12.1 m along the Fuyun fault, yielding a slip rate of 1.0 +0.4/–0.1 mm/yr since the middle Pleistocene. The lower Tp1 terrace was abandoned in the late Pleistocene and aggraded by landslides and debris flows in the latest Pleistocene–Holocene (36.7 ± 1.6 ka uppermost OSL age). Tp1 was displaced 67.5 +14.2/–6.1 m along the Fuyun fault, yielding a slip rate of 1.8 +0.5/–0.2 mm/yr since the late Pleistocene. Our preferred minimum slip rate of ~1 mm/yr suggests the Fuyun fault accommodates ~16% of the average geodetic velocity of ~6 mm/yr across the Altai Mountains. Integration of our new Fuyun slip rate with other published fault slip rates accounts for ~4.2 mm/yr of convergence across the Chinese Altai, or ~70% of the geodetic velocity field.
more »
« less
The protocataclasite dilemma: in situ 36 Cl and REE-Y lessons from an impure limestone fault scarp at Sparta, Greece
Abstract. Reconstructions of palaeoseismicity are useful for understanding and mitigating seismic hazard risks. We apply cosmogenic 36Cl exposure-age dating and measurements of rare-earth elements and yttrium (REE-Y) concentrations to the palaeoseismic history of the Sparta Fault, Greece. Bayesian-inference Markov chain Monte Carlo (MCMC) modelling of 36Cl concentrations along a 7.2 m long vertical profile on the Sparta Fault scarp at Anogia indicate an increase in the average slip rate of the scarp from 0.8–0.9 mm yr−1 6.5–7.7 kyr ago to 1.1–1.2 mm yr−1 up to the devastating 464 BCE earthquake. The average exhumation of the entire scarp up to the present day is 0.7–0.8 mm yr−1. Modelling does not indicate additional exhumation of the Sparta Fault after 464 BCE. The Sparta Fault scarp is composed of fault breccia, containing quartz and clay-lined pores, in addition to host-rock-derived clasts of calcite and microcrystalline calcite cement. The impurities control the distribution of REE-Y in the fault scarp surface and contribute spatial variation to 36Cl concentrations, which precludes the identification of individual earthquakes that have exhumed the Sparta Fault scarp from either of these data sets. REE-Y may illustrate processes that localize slip to a discrete fault plane in the Earth's near-surface, but their potential use in palaeoseismicity would benefit from further evaluation.
more »
« less
- Award ID(s):
- 2300559
- PAR ID:
- 10575398
- Publisher / Repository:
- European Geophysical Union
- Date Published:
- Journal Name:
- Solid Earth
- Volume:
- 15
- Issue:
- 11
- ISSN:
- 1869-9529
- Page Range / eLocation ID:
- 1343 to 1363
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
Abstract The fragmentation of continents results in microplates that rotate to accommodate the lateral propagation of bounding rifts. Yet, the relationships between microplate rotation rates, fault slip, and kinematics at propagating rift tips remain unknown. Here, we analyze new Global Navigation Satellite System (GNSS) data and structural geology data from the northern Western Branch of the East African Rift System that defines part of the boundary between the Nubian plate and the Victoria microplate. We resolve 0.0583 ± 0.0293°/Myr (6.48 ± 3.26 mm/yr) counterclockwise rotation of the Victoria microplate, consistent with previous studies, but with significant northwestward shift in the Euler pole relative to earlier work. Strain is largely localized on microplate‐bounding faults with 1.8–2.2 mm/yr slip rates, 7.2 × 10−8–1.28 × 10−7 y−1strain rates, NE‐directed extension, and oblique‐normal fault kinematics. Most GNSS velocities are consistent with block rigidity, but three sites in the NW region of the Victoria microplate indicate possible internal deformation.more » « less
-
The Owl Lake Fault is an active, 19 to 25-km-long, left-lateral strike-slip fault that divaricates NE from the Garlock Fault toward Death Valley in eastern California and transfers regional strain to the fault systems in Death Valley. As an active fault, the Owl Lake Fault is a poorly understood link between the extension of Death Valley and other active faults within Mojave Desert. In addition to the larger tectonic framework, improved understanding of the Owl Lake Fault as a seismogenic structure has direct implication for the assessment of the earthquake hazard in Eastern California. A significant limitation on the understanding of the Owl Lake Fault's role is the wide range of estimates previously reported for its slip rate. These range from 0.5 to 7.8 mm/yr, which implies the Owl Lake Fault may accommodate nearly all of the present-day slip on the Garlock Fault. The project aims to constrain the slip rate and understand kinematics of the Owl Lake Fault. For this project, I have used recent airborne LiDAR data (approximately 4.6 points/m2) to map the fault and precisely measure horizontally offset landforms along the Owl Lake Fault. Subsequent to LiDAR mapping, field work facilitated the ground-truth verification of initial mapping as well as more precise measurements of small fault offsets using kinematic GPS and low-altitude photogrammetry. The detailed, local microtopography permits assessing the smallest offsets (75-100 cm) which are interpreted as reflecting the last coseismic offset. Initial efforts at refining the slip rate use scarp degradation models to infer the ages of alluvial fans and stream terraces that are offset by faulting. The final step for this project involves estimating slip rate, magnitude, and recurrence interval. Neotectonic investigations allowed to constrain the slip rate of the Owl Lake Fault as 1.1 - 1.4 mm/yr. The Owl Lake Fault can produce earthquake with the magnitude M=7.2 with the 1030 -- 1430-yr recurrence interval. This study demonstrates that the Owl Lake Fault is part of the same hazard consideration as the central Garlock Fault in eastern California.more » « less
-
Abstract The potential for future earthquakes on faults is often inferred from inversions of geodetically derived surface velocities for locking on faults using kinematic models such as block models. This can be challenging in complex deforming zones with many closely spaced faults or where deformation is not readily described with block motions. Furthermore, surface strain rates are more directly related to coupling on faults than surface velocities. We present a methodology for estimating slip deficit rate directly from strain rate and apply it to New Zealand for the purpose of incorporating geodetic data in the 2022 revision of the New Zealand National Seismic Hazard Model. The strain rate inversions imply slightly higher slip deficit rates than the preferred geologic slip rates on sections of the major strike‐slip systems including the Alpine Fault, the Marlborough Fault System and the northern part of the North Island Fault System. Slip deficit rates are significantly lower than even the lowest geologic estimates on some strike‐slip faults in the southern North Island Fault System near Wellington. Over the entire plate boundary, geodetic slip deficit rates are systematically higher than geologic slip rates for faults slipping less than one mm/yr but lower on average for faults with slip rates between about 5 and 25 mm/yr. We show that 70%–80% of the total strain rate field can be attributed to elastic strain due to fault coupling. The remaining 20%–30% shows systematic spatial patterns of strain rate style that is often consistent with local geologic style of faulting.more » « less
-
Deformation experiments on hematite characterize its slip‐rate dependent frictional properties and deformation mechanisms. These data inform interpretations of slip behavior from exhumed hematite‐coated faults and present‐day deformation at depth. We used a rotary‐shear apparatus to conduct single‐velocity and velocity‐step experiments on polycrystalline specular hematite rock (∼17 μm average plate thickness) at slip rates of 0.85 μm/s to 320 mm/s, displacements of primarily 1–3 cm and up to 45 cm, and normal stresses of 5 and 8.5 MPa. The average coefficient of friction is 0.70; velocity‐step experiments indicate velocity‐strengthening to velocity‐neutral behavior at rates <1 mm/s. Scanning electron microscopy showed experimentally generated faults develop in a semi‐continuous, thin layer of red hematite gouge. Angular gouge particles have an average diameter of ∼0.7 μm, and grain size reduction during slip yields a factor of 10–100 increase in surface area. Hematite is amenable to (U‐Th)/He thermochronometry, which can quantify fault‐related thermal and mechanical processes. Comparison of hematite (U‐Th)/He dates from the undeformed material and experimentally produced gouge indicates He loss occurs during comminution at slow deformation rates without an associated temperature rise required for diffusive loss. Our results imply that, in natural fault rocks, deformation localizes within coarse‐grained hematite by stable sliding, and that hematite (U‐Th)/He dates acquired from ultracataclasite or highly comminuted gouge reflect minor He loss unrelated to thermal processes. Consequently, the magnitude of temperature rise and associated thermal resetting in hematite‐bearing fault rocks based on (U‐Th)/He thermochronometry may be overestimated if only diffusive loss of He is considered.more » « less
- Free Publicly Accessible Full Text
-
Accepted Manuscript1.0
- Journal Article:
- https://doi.org/10.5194/se-15-1343-2024
