skip to main content
US FlagAn official website of the United States government
dot gov icon
Official websites use .gov
A .gov website belongs to an official government organization in the United States.
https lock icon
Secure .gov websites use HTTPS
A lock ( lock ) or https:// means you've safely connected to the .gov website. Share sensitive information only on official, secure websites.

Explore Research Products in the PAR
It may take a few hours for recently added research products to appear in PAR search results.


Title: An Analytical Framework for Risk Evaluation and Design of Infiltration Basins for Managed Aquifer Recharge
Abstract Managed Aquifer Recharge (MAR) plays an important role in improving and supplementing groundwater storage. Many natural factors, ranging from climatic conditions to soil characteristics, can impact the efficiency of an infiltration basin. Other factors, such as engineered variables, will also influence the basin performance and the risks associated with groundwater contamination. The latter depends on the interplay between the hydraulic characteristics of the system and the soil and solute properties. The design of infiltration basins has been performed so far with the main objective of mitigating the tendency of the basin to reduce the infiltration rate with time due to clogging of the basin's bottom. Less attention has been paid to the risk of groundwater contamination by the infiltrating water. To understand the complex interplay between natural and engineering parameters on MAR efficiency and the contamination risk, we propose a risk‐oriented analytical framework. The framework allows to investigate the interplay between soil parameters, engineering design and climatic factors on the efficiency of an infiltration basin. Our framework relies on novel analytical solutions that relates the geometrical and hydrological features of the infiltration basin to its efficiency and groundwater contamination risk. The solutions incorporates the randomness associated with inflows (precipitation) and soil properties. We explore the trade‐off between efficiency and the risk of contamination and delineate a design procedure that balances these two opposing needs. Although the framework relies on simplifying assumptions, it provides a computationally efficient manner to obtain physical insights and relate model input parameters to decision making.  more » « less
Award ID(s):
1654009
PAR ID:
10576493
Author(s) / Creator(s):
 ;  ;  
Publisher / Repository:
DOI PREFIX: 10.1029
Date Published:
Journal Name:
Water Resources Research
Volume:
61
Issue:
1
ISSN:
0043-1397
Format(s):
Medium: X
Sponsoring Org:
National Science Foundation
More Like this
  1. ; ; ; (, Water)
    null (Ed.)
    Frequent droughts, seasonal precipitation, and growing agricultural water demand in the Yakima River Basin (YRB), located in Washington State, increase the challenges of optimizing water provision for agricultural producers. Increasing water storage through managed aquifer recharge (MAR) can potentially relief water stress from single and multi-year droughts. In this study, we developed an aggregated water resources management tool using a System Dynamics (SD) framework for the YRB and evaluated the MAR implementation strategy and the effectiveness of MAR in alleviating drought impacts on irrigation reliability. The SD model allocates available water resources to meet instream target flows, hydropower demands, and irrigation demand, based on system operation rules, irrigation scheduling, water rights, and MAR adoption. Our findings suggest that the adopted infiltration area for MAR is one of the main factors that determines the amount of water withdrawn and infiltrated to the groundwater system. The implementation time frame is also critical in accumulating MAR entitlements for single-year and multi-year droughts mitigation. In addition, adoption behaviors drive a positive feedback that MAR effectiveness on drought mitigation will encourage more MAR adoptions in the long run. MAR serves as a promising option for water storage management and a long-term strategy for MAR implementation can improve system resilience to unexpected droughts. 
    more » « less
  2. ; ; ; ; (, Water Resources Research)
    Abstract Managed aquifer recharge (MAR) can provide long‐term storage of excess surface water for later use. While decades of research have focused on the physical processes of MAR and identifying suitable MAR locations, very little research has been done on how to consider competing factors and tradeoffs in siting MAR facilities. This study proposes the use of a simulation‐optimization (SO) framework to map out a cost‐effectiveness frontier for MAR by combining an evolutionary algorithm with two objective functions that seek to maximize groundwater storage gains while minimizing MAR cost. We present the theoretical framework along with a real‐world application to California's Central Valley. The result of the SO framework is a Pareto front that allows identifying suitable MAR locations for different levels of groundwater storage gain and associated MAR project costs, so stakeholders can evaluate different choices based on cost, benefits, and tradeoffs of MAR sites. Application of the SO framework to the Central Valley shows groundwater can be recharged from high‐magnitude (95th percentile) flows at a marginal cost of $57 to $110 million per km3. If the 10 percent largest flows are recharged the total groundwater storage gain would double and the marginal costs would drop to between $30 and $50 million per km3. If recharge water is sourced from outside local basins (e.g., the Sacramento‐San Joaquin Delta), groundwater storage gain is approximately 25%–80% greater than can be achieved by recharging local flows, but the total cost is about 10%–15% higher because of additional lift cost. 
    more » « less
  3. ; ; ; (, Journal of Environmental Quality)
    Core Ideas Stormwater infiltration affects groundwater recharge chemistry and water–aquifer matrix interactions. Cl and Na were retained in the vadose zone beneath the basin with lag time between their respective releases. Cl caused desorption of Ra and mobilization into groundwater. Evaporation occurred between stormwater inflow and infiltration to the water table. Stormwater recharge‐influenced groundwater preferentially moved through higher‐permeability layers. 
    more » « less
  4. ; ; (, Geosciences)
    Internal soil erosion caused by water infiltration around defective buried pipes poses a significant threat to the long-term stability of underground infrastructures such as pipelines and highway culverts. This study employs a coupled computational fluid dynamics–discrete element method (CFD–DEM) framework to simulate the detachment, transport, and redistribution of soil particles under varying infiltration pressures and pipe defect geometries. Using ANSYS Fluent (CFD) and Rocky (DEM), the simulation resolves both the fluid flow field and granular particle dynamics, capturing erosion cavity formation, void evolution, and soil particle transport in three dimensions. The results reveal that increased infiltration pressure and defect size in the buried pipe significantly accelerate the process of erosion and sinkhole formation, leading to potentially unstable subsurface conditions. Visualization of particle migration, sinkhole development, and soil velocity distributions provides insight into the mechanisms driving localized failure. The findings highlight the importance of considering fluid–particle interactions and defect characteristics in the design and maintenance of buried structures, offering a predictive basis for assessing erosion risk and infrastructure vulnerability. 
    more » « less
  5. ; ; ; (, Water Resources Research)
    Abstract GRACE (Gravity Recovery and Climate Experiment) has been widely used to evaluate terrestrial water storage (TWS) and groundwater storage (GWS). However, the coarse‐resolution of GRACE data has limited the ability to identify local vulnerabilities in water storage changes associated with climatic and anthropogenic stressors. This study employs high‐resolution (1 km2) GRACE data generated through machine learning (ML) based statistical downscaling to illuminate TWS and GWS dynamics across twenty sub‐regions in the Indus Basin. Monthly TWS and GWS anomalies obtained from a geographically weighted random forest (RFgw) model maintained good consistency with original GRACE data at the 25 km2grid scale. The downscaled data at 1 km2resolution illustrate the spatial heterogeneity of TWS and GWS depletion within each sub‐region. Comparison with in‐situ GWS from 2,200 monitoring wells shows that downscaling of GRACE data significantly improves agreement with in‐situ data, evidenced by higher Kling‐Gupta Efficiency (0.50–0.85) and correlation coefficients (0.60–0.95). Hotspots with the highest TWS and GWS decline rate between 2002 and 2023 were Dehli Doab (−442, −585 mm/year), BIST Doab (−367, −556 mm/year), Rajasthan (−242, −381 mm/year), and BARI (−188, −333 mm/year). Based on a general additive model, 47%–83% of the TWS decline was associated with anthropogenic stressors mainly due to increasing trends of crop sown area, water consumption, and human settlements. The decline rate of TWS and GWS anomalies was lower (i.e., −25 to −75 mm/year) in upstream sub‐regions (e.g., Yogo, Gilgit, Khurmong, Kabul) where climatic factors (downward shortwave radiations, air temperature, and sea surface temperature) explained 72%–91% of TWS/GWS changes. The relative influences of climatic and anthropogenic stressors varied across sub‐regions, underscoring the complex interplay of natural‐human activities in the basin. These findings inform place‐based water resource management in the Indus Basin by advancing the understanding of local vulnerabilities. 
    more » « less
  • Citation Formats
  • MLA
  • APA
  • Chicago
  • BibTeX
  • Save / Share this Record
  • Send to Email