skip to main content
US FlagAn official website of the United States government
dot gov icon
Official websites use .gov
A .gov website belongs to an official government organization in the United States.
https lock icon
Secure .gov websites use HTTPS
A lock ( lock ) or https:// means you've safely connected to the .gov website. Share sensitive information only on official, secure websites.

Explore Research Products in the PAR
It may take a few hours for recently added research products to appear in PAR search results.


Title: Metallographic and Extraction Replica Methods for Characterization of Tungsten Heavy Alloy: H13 Clads
Abstract Tungsten heavy alloys are used in demanding high pressure die casting applications due to their high temperature strength, high thermal conductivity, and low thermal expansion. High cost limits applications to small sintered die inserts and manual gas tungsten arc weld repairs. A new tungsten heavy alloy consumable, Anviloy wire, was developed for automated cladding of hot work tool steel dies. Literature regarding characterization of tungsten heavy alloy die steel clads was lacking. Understanding base metal dilution effect on clad microstructure is critical but required new sample preparation methods. An Anviloy wire-H13 clad was made using hot wire gas tungsten arc cladding and analyzed with metallography. Samples were found to have grain boundary M6C carbide phase as-welded with the help of an alkaline sodium picrate etchant. An isothermally aged arc crucible melted sample of the same composition was characterized using metallography, scanning electron microscopy, and transmission electron diffraction. The clad representative arc crucible melted sample was subjected to isothermal aging at 725°C for 100 hours. Isothermal aging resulted in precipitation of a high volume fraction of intermetallic platelets. Using a new carbon extraction replica sample preparation method involving two chemical polishing steps, transmission electron diffraction of precipitates indicated they were mu phase intermetallic.  more » « less
Award ID(s):
2052747
PAR ID:
10577400
Author(s) / Creator(s):
; ;
Corporate Creator(s):
Editor(s):
Deacon, Ryan M
Publisher / Repository:
Metallography, Microstructure, and Analysis (2024) 13:452–461
Date Published:
Journal Name:
Metallography, Microstructure, and Analysis
Volume:
13
Issue:
3
ISSN:
2192-9262
Page Range / eLocation ID:
452 to 461
Subject(s) / Keyword(s):
Welding · Refractory metals · Thermal stability · Metallography · Cladding
Format(s):
Medium: X
Sponsoring Org:
National Science Foundation
More Like this
  1. ; ; (, Materials Characterization)
    A dissimilar weld between a low alloy steel (LAS) butter weld joined to a F65 steel pipe using a narrow groove hot wire gas tungsten arc welding (HW-GTAW) procedure with Alloy 625 filler metal was investigated. The weld interpass microstructure is comprised of large swirls formed by a macrosegregation mechanism involving partial, non-uniform mixing of liquid base metal with the lower melting temperature weld pool, followed by fast solidification. This mechanism produces steep gradients in composition and solidification behavior. The resulting swirls are composed of alternating iron-rich peninsulas and partially mixed zones (PMXZ) that are surrounded by planar and cellular zones exhibiting multiple solidification directions. Large austenitic grains, encompassing planar, cellular, and dendritic morphologies, nucleate off peninsulas in direct contact with the weld pool. The highest hardness was found in nickel and chromium rich PMXZs that exhibited a lath martensite microstructure. In the event of exposure to hydrogen containing environments, the PMXZs could serve as nucleation sites for hydrogen assisted cracking. 
    more » « less
  2. ; ; ; ; ; ; ; ; ; ; et al (, Acta materialia)
    Cu3Sn, a well-known intermetallic compound with a high melting temperature and thermal stability, has found numerous applications in microelectronics, 3D printing, and catalysis. However, the relationship between the material's thermal conductivity anisotropy and its complex anti-phase boundary superstructure is not well understood. Here, frequency domain thermoreflectance was used to map the thermal conductivity variation across the surface of arc-melted polycrystalline Cu3Sn. Complementary electron backscatter diffraction and transmission electron microscopy revealed the thermal conductivity in the principal a, b, and c orientations to be 57.6, 58.9, and 67.2 W/m-K, respectively. Density functional theory calculations for several Cu3Sn superstructures helped examine thermodynamic stability factors and evaluate the direction-resolved electron transport properties in the relaxation time approximation. The analysis of computed temperature- and composition-dependent free energies suggests metastability of the known long-period Cu3Sn superstructures while the transport calculations indicate a small directional variation in the thermal conductivity. The ∼15% anisotropy measured and computed in this study is well below previously reported experimental values for samples grown by liquid-phase electroepitaxy. 
    more » « less
  3. ; ; ; ; ; ; (, Advanced Engineering Materials)
    Herein, the feasibility of the gas tungsten arc welding‐based wire + arc additive manufacturing process for fabricating thin wall structures of niobium‐1 wt% zirconium (NbZr1) alloy is investigated. Three different heat input conditions (low, medium, and high) have been selected for fabricating it. The microstructure is characterized by using optical microscopy, scanning electron microscopy, X‐ray diffraction, energy‐dispersive spectroscopy, and electron backscattered diffraction (EBSD). The microstructure shows the columnar dendritic structure elongated in the build direction. No cracks or porosity are observed in the structure. Average Vickers hardness for low, medium, and high heat input conditions are 146.6, 162.1, and 163.5 HV, respectively. There is an increasing trend of microhardness value along the deposition height, which can be attributed to the difference in secondary dendritic arm spacing and the formation of precipitates. The tensile strength of the specimen is comparable to the conventional and additively manufactured structures. EBSD analysis confirms that possible subgrains are responsible for good mechanical properties at room temperature. In the majority of the tensile samples, the failure mechanism has been identified as a ductile fracture. The mechanical characteristics fluctuate with locations in each of the thin walls, suggesting anisotropy in the deposits. 
    more » « less
  4. ; ; ; (, Welding in the World)
    API 5L Grade X65 steel pipes, internally clad alloy 625, are commonly utilized in pipelines and risers for subsea oil and gas extraction. Gird welds in such pipes are conventionally made using alloy 625 filler metal. However, alloy 625 weld metal cannot meet the base metal yield strength overmatching requirement for subsea reel lay installation. This study explored materials selection and process development for low-alloy steel girth welds in API 5L Grade X65 steel pipes, internally clad with alloy 625. Welding with a higher melting point filler metal over a lower melting substrate, i.e., low-alloy steel over Ni-based alloy, is impractical due to increased susceptibility to solidification cracking and solidification shrinkage porosity. Pseudo-binary phase diagrams developed for various combinations of low alloy steel filler metals and Ni-based alloy substrates identified good compatibility between ER80S-G filler metal and alloy 686. The solidification temperature range and the tendency for partitioning of alloying elements were significantly lower throughout the entire ER80S-G/alloy 686 dilution range than in the low alloy steel filler metals/alloy 625 combinations. Extensive process optimization effort to reduce the dilution of alloy 686 root pass in the low-alloy steel weld metal and avoid incomplete fusion defects allowed for the production of defect-free girth welds. These welds met the yield strength and ductility requirements for subsea reel lay installation of pipelines. Process optimization for bead tempering significantly narrowed the high hardness region in the ER80S-G/alloy 686 partially mixed zone. 
    more » « less
  5. ; ; ; (, Materials Today Communications)
    Gas metal arc additive manufacturing (GMA-AM), also known as wire arc additive manufacturing (WAAM), uses an electric arc to melt a wire electrode and deposit objects layer by layer. This study focuses on creating single-pass wall structures using a low-carbon steel wire (ER70S-6) and examining the relationship between pulse frequency and weld geometry, microstructure, and mechanical properties. Microscopic observations showed a typical columnar microstructure with three distinct regions: acicular ferrite, bainite, and allotriomorphic ferrite in the first and last layers, while the mid-region exhibited homogenous polygonal ferrite grains with some pearlite at the grain boundaries. The tensile test results demonstrated a dependency of strength on the applied pulse frequency, with the highest strength (i.e., the ultimate tensile strength of 522 MPa and yield strength of 375 MPa with ductility of ∼52%) achieved in parts processed at a frequency of 100 Hz. Vickers microhardness values revealed uniform hardness in the middle region, consistent with the microstructure observation. Analyzing thermal cycles, coupled with microstructure analysis and continuous cooling transition diagrams, provided insight into how phase and microstructure evolution occurred in low-carbon low-alloy steels processed through PGMA-AM. 
    more » « less
  • Citation Formats
  • MLA
  • APA
  • Chicago
  • BibTeX
  • Save / Share this Record
  • Send to Email