An official website of the United States government
Abstract Deep-focus earthquakes that occur at 350–660 km are assumed to be caused by olivine → spinel phase transformation (PT). However, there are many existing puzzles: (a) What are the mechanisms for jump from geological 10−17 − 10−15 s−1to seismic 10 − 103 s−1strain rates? Is it possible without PT? (b) How does metastable olivine, which does not completely transform to spinel for over a million years, suddenly transform during seconds? (c) How to connect shear-dominated seismic signals with volume-change-dominated PT strain? Here, we introduce a combination of several novel concepts that resolve the above puzzles quantitatively. We treat the transformation in olivine like plastic strain-induced (instead of pressure/stress-induced) and find an analytical 3D solution for coupled deformation-transformation-heating in a shear band. This solution predicts conditions for severe (singular) transformation-induced plasticity (TRIP) and self-blown-up deformation-transformation-heating process due to positive thermomechanochemical feedback between TRIP and strain-induced transformation. This process leads to temperature in a band, above which the self-blown-up shear-heating process in the shear band occurs after finishing the PT. Our findings change the main concepts in studying the initiation of the deep-focus earthquakes and PTs during plastic flow in geophysics in general.
more »
« less
Severe Strain‐Induced Olivine‐Ringwoodite Transformation at Room Temperature: Key to Enigmas of Deep‐Focus Earthquake
Abstract Deep‐focus earthquakes at 350–660 km are presumably caused by olivine‐spinel phase transformation (PT). This cannot, however, explain the observed high seismic strain rate, which requires PT to complete within seconds, while metastable olivine does not transform for over a million years. Recent theory quantitatively describes how severe plastic deformations (SPD) can solve this dilemma but lacking experimental proof. Here, we introduce dynamic rotational diamond anvil cell with rough diamond anvils to impose SPD on San Carlos olivine. While olivine never transformed to spinel at room temperature, we obtained reversible olivine‐ringwoodite PT under SPD at 15–28 GPa within tens of seconds. The PT pressure reduces with increasing dislocation density, microstrain, plastic strain, and decreasing crystallite size. Results demonstrate a new strain‐induced PT mechanism compared to a pressure/temperature‐induced one. Combined with SPD during olivine subduction, this mechanism can accelerate olivine‐ringwoodite PT from millions of years to timescales relevant to earthquakes.
more »
« less
- Award ID(s):
- 2246991
- PAR ID:
- 10577664
- Publisher / Repository:
- DOI PREFIX: 10.1029
- Date Published:
- Journal Name:
- Geophysical Research Letters
- Volume:
- 52
- Issue:
- 6
- ISSN:
- 0094-8276
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
Deep-focus earthquakes that occur at 350–660 km, where pressures p =12-23 GPa and temperature T =1800-2000 K, are generally assumed to be caused by olivine→spinel phase transformation, see pioneering works [1–10]. However, there are many existing puzzles: (a) What are the mechanisms for jump from geological 10−17−10−15 s−1 to seismic 10−103s−1(see [3]) strain rates? Is it possible without phase transformation? (b) How does metastable olivine, which does not completely transform to spinel at high temperature and deeply in the region of stability of spinel for over the million years, suddenly transforms during seconds and generates seismic strain rates 10−103s−1 that produce strong seismic waves? (c) How to connect deviatorically dominated seismic signals with volume-change dominated transformation strain during phase transformations [9,11]? Here we introduce a combination of several novel concepts that allow us to resolve the above puzzles quantitatively. We treat the transformation in olivine like plastic strain-induced (instead of pressure/stress-induced) and find an analytical 3D solution for coupled deformation-transformation-heating processes in a shear band. This solution predicts conditions for severe (singular) transformation-induced plasticity (TRIP) and self-blown-up deformation-transformation-heating process due to positive thermomechanochemical feedback between TRIP and strain-induced transformation. In nature, this process leads to temperature in a band exceeding the unstable stationary temperature, above which the self-blown-up shear-heating process in the shear band occurs after finishing the phase transformation. Without phase transformation and TRIP, significant temperature and strain rate increase is impossible. Due to the much smaller band thickness in the laboratory, heating within the band does not occur, and plastic flow after the transformation is very limited. Our findings change the main concepts in studying the initiation of the deep-focus earthquakes and phase transformations during plastic flow in geophysics in general. The latter may change the interpretation of different geological phenomena, e.g., the possibility of the appearance of microdiamond directly in the cold Earth crust within shear-bands [12] during tectonic activities without subduction to the mantle and uplifting. Developed theory of the self-blown-up transformation-TRIP-heating process is applicable outside geophysics for various processes in materials under pressure and shear, e.g., for new routes of material synthesis [12,13], friction and wear, surface treatment, penetration of the projectiles and meteorites, and severe plastic deformation and mechanochemical technologies.more » « less
-
Severe plastic deformations (SPD) under high pressure, mostly by high-pressure torsion, are employed for producing nanostructured materials and stable or metastable high-pressure phases. However, they were studied postmortem after pressure release. Here, we review recent in situ experimental and theoretical studies of coupled SPD, strain-induced phase transformations (PTs), and microstructure evolution under high pressure obtained under compression in diamond anvil cell or compression and torsion in rotational diamond anvil cell. The utilization of x-ray diffraction with synchrotron radiation allows one to determine the radial distribution of volume fraction of phases, pressure, dislocation density, and crystallite size in each phase and the main laws of their evolution and interaction. Coupling with the finite element simulations of the sample behavior allows the determination of fields of all components of the stress and plastic strain tensors and volume fraction of high-pressure phase and provides a better understanding of ways to control occurring processes. Atomistic, nanoscale and scale-free phase-field simulations allow elucidation of the main physical mechanisms of the plastic strain-induced drastic reduction in phase transformation pressure (by one to two orders of magnitude), the appearance of new phases, and strain-controlled PT kinetics in comparison with hydrostatic loading. Combining in situ experiments with multiscale theory potentially leads to the formulation of methods to control strain-induced PT and microstructure evolution and designing economic synthetic paths for the defect-induced synthesis of desired high-pressure phases, nanostructures, and nanocomposites.more » « less
-
Study of the plastic flow and strain-induced phase transformations (PTs) under high pressure with diamond anvils is important for material and geophysics. We introduce rough diamond anvils and apply them to Zr, which drastically change the plastic flow, microstructure, and PTs. Multiple steady microstructures independent of pressure, plastic strain, and strain path are reached. Maximum friction equal to the yield strength in shear is achieved. This allows determination of the pressure-dependence of the yield strength and proves that omega-Zr behaves like perfectly plastic, isotropic, and strain path-independent immediately after PT. Record minimum pressure for alpha-omega PT was identified. Kinetics of strain-induced PT depends on plastic strain and time. Crystallite size and dislocation density in omega-Zr during PT depend solely on the volume fraction of omega-Zr.more » « less
-
Study of the plastic flow and strain-induced phase transformations (PTs) under high pressure with diamond anvils is important for material and geophysics. We introduce rough diamond anvils and apply them to Zr, which drastically change the plastic flow, microstructure, and PTs. Multiple steady microstructures independent of pressure, plastic strain, and strain path are reached. Maximum friction equal to the yield strength in shear is achieved. This allows determination of the pressure-dependence of the yield strength and proves that ω-Zr behaves like perfectly plastic, isotropic, and strain path-independent immediately after PT. Record minimum pressure for α-ω PT was identified. Kinetics of strain-induced PT depends on plastic strain and time. Crystallite size and dislocation density in ω-Zr during PT depend solely on the volume fraction of ω-Zr.more » « less
