An official website of the United States government
Abstract The transient self‐assembly of molecules under the direction of a consumable fuel source is fundamental to biological processes such as cellular organization and motility. Such biomolecular assemblies exist in an out‐of‐equilibrium state, requiring continuous consumption of high energy molecules. At the same time, the creation of bioinspired supramolecular hydrogels has traditionally focused on associations occurring at the thermodynamic equilibrium state. Here, hydrogels are prepared from cucurbit[7]uril host–guest supramolecular interactions through transient physical crosslinking driven by the consumption of a reactive chemical fuel. Upon action from this fuel, the affinity and dynamics of CB[7]–guest recognition are altered. In this way, the lifetime of transient hydrogel formation and the dynamic modulus obtained are governed by fuel consumption, rather than being directed by equilibrium complex formation.
more »
« less
Fuel‐Driven π‐Conjugated Superstructures to Form Transient Conductive Hydrogels
Abstract Despite advances in creating dissipative materials with transient properties, such as hydrogels and active droplets, their application remains confined to temporal changes in structural properties. Developing out‐of‐equilibrium materials whose electronic functions are parameterized by a chemical reaction cycle is challenging. Yet, this class of materials is required to construct biomimetic materials. In contrast to traditional chemical reaction cycles that exploit molecularly dissolved building blocks at thermodynamic equilibrium, we show that fiber structures derived from reactive naphthalene diimide (NDI) building blocks can be used as resting states to form far‐from‐equilibrium conductive hydrogels after the addition of chemical fuels. Upon fueling the NDI‐derived fibers, a dual‐component activation and deactivation pathway is deduced by kinetic analysis and is absent when using a molecularly dissolved resting state. Investigating the solid‐state morphologies of the structures formed throughout the fuel‐driven reaction cycle using cryo‐EM reveals that the resting thermodynamic fibers evolve to transient thicker fibrils and layered superstructures. We show that the transient redox‐active hydrogels exhibit a nearly threefold increase in electrical conductivity upon fuel consumption before reverting to their original value over hours. These far‐from‐equilibrium materials are potential candidates in applications such as programmable biorobotics and chemical computing.
more »
« less
- Award ID(s):
- 2401869
- PAR ID:
- 10578619
- Publisher / Repository:
- Wiley Blackwell (John Wiley & Sons)
- Date Published:
- Journal Name:
- Angewandte Chemie
- Volume:
- 137
- Issue:
- 5
- ISSN:
- 0044-8249
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
Living systems are composed of a select number of biopolymers and minerals yet exhibit an immense diversity in materials properties. The wide-ranging characteristics, such as enhanced mechanical properties of skin and bone, or responsive optical properties derived from structural coloration, are a result of the multiscale, hierarchical structure of the materials. The fields of materials and polymer chemistry have leveraged equilibrium concepts in an effort to mimic the structure complex materials seen in nature. However, realizing the remarkable properties in natural systems requires moving beyond an equilibrium perspective. An alternative method to create materials with multiscale structures is to approach the issue from a kinetic perspective and utilize chemical processes to drive phase transitions. This Account features an active area of research in our group, reaction-induced phase transitions (RIPT), which uses chemical reactions such as polymerizations to induce structural changes in soft material systems. Depending on the type of phase transition (e.g., microphase versus macrophase separation), the resulting change in state will occur at different length scales (e.g., nm – μm), thus dictating the structure of the material. For example, the in situ formation of either a block copolymer or a homopolymer initially in a monomer mixture during a polymerization will drive nanoscale or macroscale transitions, respectively. Specifically, three different examples utilizing reaction-driven phase changes will be discussed: 1) in situ polymer grafting from block copolymers, 2) multiscale polymer nanocomposites, and 3) Lewis adduct-driven phase transitions. All three areas highlight how chemical changes via polymerizations or specific chemical binding result in phase transitions that lead to nanostructural and multiscale changes. Harnessing kinetic chemical processes to promote and control material structure, as opposed to organizing pre-synthesized molecules, polymers, or nanoparticles within a thermodynamic framework, is a growing area of interest. Trapping nonequilibrium states in polymer materials has been primarily focused from a polymer chain conformation viewpoint in which synthesized polymers are subjected to different thermal and processing conditions. The impact of reaction kinetics and polymerization rate on final polymer material structure is starting to be recognized as a new way to access different morphologies not available through thermodynamic means. Furthermore, kinetic control of polymer material structure is not specific to polymerizations and encompasses any chemical reaction that induce morphology transitions. Kinetically driven processes to dictate material structure directly impact a broad range of areas including separation membranes, biomolecular condensates, cell mobility, and the self-assembly of polymers and colloids. Advancing polymer material syntheses using kinetic principles such as RIPT opens new possibilities for dictating material structure and properties beyond what is currently available with traditional self-assembly techniques.more » « less
-
Hydrogels cross-linked by dynamic covalent chemistry (DCC) are stiff and remodelable, making them ideal biomimetics for tissue engineering applications. Due to the reversibility of DCC cross-links, the opportunity exists to transiently control hydrogel network formation through the use of small molecule competitors. Specifically, we incorporate low molecular weight competitors that reversibly disrupt the formation of hydrazone cross-links as they diffuse through a recombinant hydrogel. Using complementary experimental, computational, and theoretical polymer physics approaches, we present a family of competitors that predictably alter hydrogel gelation time and mechanics. By changing the competitor chemistry, we connect key reaction parameters (forward and reverse reactions rates and thermodynamic equilibrium constants) to the delayed onset of a percolated network, increased hydrogel gelation time, and transient control of hydrogel stiffness. Using human intestinal organoids as a model system, we demonstrate the ability to tune gelation kinetics of a recombinant hydrogel for uniform encapsulation of individual, patient-derived stem cells and their proliferation into three-dimensional structures. Taken together, our data establish a validated framework to relate molecular-level parameters of transient competitors to predicted macromolecular-network properties. As interest in biomimetic, DCC-cross-linked hydrogels continues to grow, these results will enable the rationale design of bespoke, dynamic biomaterials for tissue engineering.more » « less
-
A thioarylation method is developed for the synthesis of 2,3-dihydrothiopheniums through an electrophilic-cyclization–cross-coupling mechanism, harnessing the gold(I)/(III) cycle of the recently developed MeDalPhosAuCl catalyst. Single-crystal X-ray crystal structural analysis of the dihydrothiophenium products characterized the anti-addition of the sulfur and Csp2 group to the alkyne and a preference for 5-endo dig cyclization. The dihydrothiophenium products are demonstrated as synthetic building blocks for stereodefined acyclic tetrasubstituted alkenes upon ring-opening reaction with amines. Intramolecular competition experiments show the favorability of Csp3 tether cyclizations over Csp2 tethers, preferentially generating dihydrothiopheniums over thiopheniums. Intermolecular competition experiments of alkyne aryl groups and an intermolecular aryl iodide competition suggest a rate-determining reductive elimination step in the gold(I)/gold(III) catalytic cycle. This rate-determining step is further supported by HRMS analysis of reaction intermediates that identify the catalyst resting state under turnover conditions. Catalyst poisoning experiments provide evidence of substrate inhibition, further consistent with these conclusions.more » « less
-
The spatiotemporal regulation of chemical reactivity in biological systems permits a network of metabolic reactions to take place within the same cellular environment. The exquisite control of reactivity is often mediated by out-of-equilibrium structures that remain functional only as long as fuel is present to maintain the higher energy, active state. An important goal in supramolecular chemistry aims to develop functional, energy dissipating systems that approach the sophistication of biological machinery. The challenge is to create strategies that couple the energy consumption needed to promote a molecule to a higher energy, assembled state to a functional property such as catalytic activity. In this work, we demonstrated that the assembly of a spiropyran (SP) dipeptide (1) transiently promoted the proline-catalyzed aldol reaction in water when visible light was present as fuel. The transient catalytic activity emerged from 1 under light illumination due to the photoisomerization of the monomeric, O -protonated (1-MCH + ) merocyanine form to the spiropyran (1-SP) state, which rapidly assembled into nanosheets capable of catalyzing the aldol reaction in water. When the light source was removed, thermal isomerization to the more stable MCH + form caused the nanosheets to dissociate into a catalytically inactive, monomeric state. Under these conditions, the aldol reaction could be repeatedly activated and deactivated by switching the light source on and off.more » « less
