An official website of the United States government
In this review, we examine recent progress using boron nitride (BN) and molybdenum disulfide (MoS2) nanostructures for electronic, energy, biomedical, and environmental applications. The scope of coverage includes zero-, one-, and two-dimensional nanostructures such as BN nanosheets, BN nanotubes, BN quantum dots, MoS2 nanosheets, and MoS2 quantum dots. These materials have sizable bandgaps, differentiating them from other metallic nanostructures or small-bandgap materials. We observed two interesting trends: (1) an increase in applications that use heterogeneous materials by combining BN and MoS2 nanostructures with other nanomaterials, and (2) strong research interest in environmental applications. Last, we encourage researchers to study how to remove nanomaterials from air, soil, and water contaminated with nanomaterials. As nanotechnology proceeds into various applications, environmental contamination is inevitable and must be addressed. Otherwise, nanomaterials will go into our food chain much like microplastics.
more »
« less
Boron nitride nanosheets, quantum dots, and dots: Synthesis, properties, and biomedical applications
This review examines three aspects of hexagonal boron nitride (h-BN) nanomaterials: properties, synthesis methods, and biomedical applications. We focus the scope of review on three types of h-BN nanostructures: boron nitride nanosheets (BNNSs, few-layered h-BN, larger than ∼100 nm in lateral dimensions), boron nitride quantum dots (BN QDs, smaller than ∼10 nm in all dimensions, with inherent excitation-dependent fluorescence), and boron nitride dots (BN dots, smaller than ∼10 nm in all dimensions, wide bandgap without noise fluorescence). The synthesis methods of BNNSs, BN QDs, and BN dots are summarized in top-down and bottom-up approaches. Future synthesis research should focus on the scalability and the quality of the products, which are essential for reproducible applications. Regarding biomedical applications, BNNSs were used as nanocarriers for drug delivery, mechanical reinforcements (bone tissue engineering), and antibacterial applications. BN QDs are still limited for non-specific bioimaging applications. BN dots are used for the small dimension to construct high-brightness probes (HBPs) for gene sequence detections inside cells. To differentiate from other two-dimensional materials, future applications should focus on using the unique properties of BN nanostructures, such as piezoelectricity, boron neutron capture therapy (BNCT), and their electrically insulating and optically transparent nature. Examples would be combining BNCT and chemo drug delivery using BNNSs, and using BN dots to form HBPs with enhanced fluorescence by preventing fluorescence quenching using electrically insulating BN dots.
more »
« less
- Award ID(s):
- 2329746
- PAR ID:
- 10582190
- Publisher / Repository:
- American Institute of Physics
- Date Published:
- Journal Name:
- APL Materials
- Volume:
- 13
- Issue:
- 4
- ISSN:
- 2166-532X
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
Abstract Hexagonal boron nitride (h‐BN) is a layered inorganic synthetic crystal exhibiting high temperature stability and high thermal conductivity. As a ceramic material it has been widely used for thermal management, heat shielding, lubrication, and as a filler material for structural composites. Recent scientific advances in isolating atomically thin monolayers from layered van der Waals crystals to study their unique properties has propelled research interest in mono/few layeredh‐BN as a wide bandgap insulating support for nanoscale electronics, tunnel barriers, communications, neutron detectors, optics, sensing, novel separations, quantum emission from defects, among others. Realizing these futuristic applications hinges on scalable cost‐effective high‐qualityh‐BN synthesis. Here, the authors review scalable approaches of high‐quality mono/multilayerh‐BN synthesis, discuss the challenges and opportunities for each method, and contextualize their relevance to emerging applications. Maintaining a stoichiometric balance B:N = 1 as the atoms incorporate into the growing layered crystal and maintaining stacking order between layers during multi‐layer synthesis emerge as some of the main challenges forh‐BN synthesis and the development of processes to address these aspects can inform and guide the synthesis of other layered materials with more than one constituent element. Finally, the authors contextualizeh‐BN synthesis efforts along with quality requirements for emerging applications via a technological roadmap.more » « less
-
Abstract Quantum dots encompass a broad spectrum of optical, catalytic, and electrochemical properties bringing in novel applications in catalysis, imaging, displays, and optoelectronics. Herein, the unanticipated broad‐spectrum light absorption and high fluorescence quantum yield in fluorinated boron nitride (FBN) quantum dots are discussed. A heterostructure of FBN quantum dots with a wide‐bandgap semiconductor, titania nanotube arrays, exhibits high photocatalytic activity as evidenced by high external quantum efficiency extending from ultraviolet to green region of the solar spectrum (≈24% at 400 nm). The high activity is confirmed using photoelectrochemical hydrogen evolution experiments. Further, it is demonstrated that high fluorescence quantum yield could be tapped for the detection of glycolytic activity in cancer cells compared to normal cells. This finding could shift the paradigm of molecular detection using quantum dots. The 0D structure and the gap states introduced through fluorination are believed to be responsible for these unprecedented characteristics of boron nitride.more » « less
-
Most high-quality quantum dots (QDs) are synthesized in the organic phase, and are often coated with polymers for use in aqueous biological environments. QDs can exhibit fluorescence losses during phase transfer, but evaluating underlying mechanisms ( e.g. , oxidation, surface etching, loss of colloidal stability) can be challenging because of variation in synthesis methods. Here, fluorescence stability of QDs encapsulated in block co-polymer (BCP) micelles was investigated as a function of BCP terminal functionalization ( i.e. , –OH, –COOH, and –NH 2 groups) and synthesis method ( i.e. , electrohydrodynamic emulsification-mediated selfassembly (EE-SA), sonication, and manual shaking). Fluorescence losses, fluorescence intensity, energy spectra, and surface composition were assessed using spectrofluorometry and cathodoluminescence spectroscopy (CL) with integrated X-ray photoemission spectroscopy (XPS). QDs passivated using charged BCPs exhibited 50–80% lower fluorescence intensity than those displaying neutral groups ( e.g. , –OH), which CL/XPS revealed to result from oxidation of surface Cd to CdO. Fluorescence losses were higher for processes with slow formation speed, but minimized in the presence of poly(vinyl alcohol) (PVA) surfactant. These data suggest slower BCP aggregation kinetics rather than electrostatic chain repulsion facilitated QD oxidation. Thus, polymer coating method and BCP structure influence QD oxidation during phase transfer and should be selected to maximize fast aggregation kinetics.more » « less
-
Abstract The actual incorporation of dopant species into the ZnS Quantum Dots (QDs) host lattice will induce structural defects evidenced by a red shift in the corresponding exciton. The doping should create new intermediate energetic levels between the valence and conduction bands of the ZnS and affect the electron-hole recombination. These trap states would favour the energy transfer processes involved with the generation of cytotoxic radicals, so-called Reactive Oxygen Species, opening the possibility to apply these nanomaterials in cancer research. Any synthesis approach should consider the direct formation of the QDs in biocompatible medium. Accordingly, the present work addresses the microwave-assisted aqueous synthesis of pure and doped ZnS QDs. As-synthesized quantum dots were fully characterized on a structural, morphological and optical viewpoint. UV-Vis analyzes evidenced the excitonic peaks at approximately 310 nm, 314 nm and 315 nm for ZnS, Cu-ZnS and Mn-ZnS, respectively, Cu/Zn and Mn/Zn molar ratio was 0.05%. This indicates the actual incorporation of the dopant species into the host lattice. In addition, the Photoluminescence spectrum of non-doped ZnS nanoparticles showed a high emission peak that was red shifted when Mn 2+ or Cu 2+ were added during the synthesis process. The main emission peak of non-doped ZnS, Cu-doped ZnS and Mn-doped ZnS were observed at 438 nm, 487 nm and 521 nm, respectively. Forthcoming work will address the capacity of pure and Cu-, Mn-ZnS quantum dots to generate cytotoxic Reactive Oxygen Species for cancer treatment applications.more » « less
