An official website of the United States government
Titanium (Ti) typically exhibits low mobility in geologic fluids due to the low aqueous solubility of common (Fe-)Ti oxide minerals. Consequently, Ti isotope variations (δ49/47Ti, given as δ49Ti) in geologic systems are primarily attributed to magmatic differentiation. Thus, the potential for fluid-mineral fractionation has received less attention. However, ligand-rich fluids are capable of mobilizing Ti as observed in natural systems and laboratory studies. As hydrothermal ore mineralization is commonly associated with ligand-rich brines capable of transporting significant quantities of metals, Ti isotopes may aid in understanding mineralization and alteration in complex hydrothermal systems. Here we present data from computational modeling of various Ti coordination complexes theorized to exist in geologic systems and/or under relevant experimental conditions as well as computed fractionation factors for various Ti-bearing crystalline phases to investigate the basic mechanics of equilibrium fluid-mineral Ti isotope fractionation. These results indicate that equilibrium fluid-mineral Ti isotope exchange between our modeled Ti complexes and phases with 6-coordinated Ti is predicted to generally lead to enrichment of heavy Ti isotopes in the fluid. Because minerals with 6-coordinated Ti (such as magnetite and ilmenite) are the most important reservoirs of Ti in the solid Earth, Ti isotope equilibration between terrestrial rocks and fluids can be generalized to enrich the fluid in heavy Ti isotopes. We also performed magnetite-ülvospinel leaching experiments to investigate fluid-mineral Ti isotope fractionation in this phase. Mineral leaching experiments varying acid strength, leaching temperature, and reaction time with HCl and HF qualitatively support the prediction that the fluid phase will become enriched in heavy Ti isotopes during fluid-mineral interactions that approach equilibrium with Ti-rich magnetite. Additionally, the leaching data also suggest that the fluid becomes slightly enriched in lighter Ti isotopes when Ti exchange is limited—potentially due to kinetic effects. Therefore, magnetite from natural systems may be depleted in heavy Ti isotopes during regenerative mineral replacement involving equilibration with fluids or may possibly become depleted in light Ti isotopes under a kinetic fractionation regime—leading to mineral δ49Ti values that are insufficiently explained by magmatic differentiation or inter-mineral fractionation. These results are a first look at fluid-mineral interactions that may affect Ti isotope fractionation in hydrothermal mineral systems, and Ti isotopes should be further studied as a potential method of understanding aqueous metal transport and tracing alteration in mineral deposits.
more »
« less
This content will become publicly available on January 1, 2026
Applications of radiogenic and transition metal isotopes to the study of metallic mineral deposits
This chapter discusses how radiogenic and stable isotopes can be used in the study of metallic mineral deposits. Although the chapter is mostly focused on the radiogenic (Pb, Os) and heavy stable (Fe, Cu, Zn) isotopes of metallic elements, we complement the discussion highlighting also the power of stable isotopes of light elements, which are major to significant components of hydrothermal fluids and rocks (e.g., H, B, C, N, O, S), as well as of radiogenic isotopes of elements (Sr, Nd, Hf ) that are useful in tracing fluid/magma sources and their interaction with the host rocks. In the first part of this chapter we discuss general aspects of isotopes clarifying the differences between stable non-radiogenic and stable radiogenic isotopes and, consequently, their different applicability to metallogenic studies. Due to their properties, stable non-radiogenic isotopes record mass-dependent fractionation that occur in many reactions associated with the formation of mineral deposits. Mass-dependent fractionation of stable non-radiogenic isotopes occurs both under equilibrium and non-equilibrium (kinetic) conditions of the reactions leading to ore mineral deposition and is controlled by various physico-chemical parameters, like, among the principal ones, temperature, oxygen fugacity, and biological activity. Therefore, stable non-radiogenic isotopes can inform us about the physico-chemical and, eventually, biological processes that control ore mineral deposition and also on the sources of some metals (e.g., transition metal isotopes of elements like Fe, Cu, Zn) or of the fluids (e.g., H, C, O, N, S isotopes) and even of metal ligands (e.g., S, Cl). We conclude the first part of the chapter providing some hints on the strategy of sampling and on the instrumentation related to isotopic studies. In the second part we discuss radioactive-radiogenic isotope systems and their applications in metallogenic studies of metallic mineral deposits. Stable radiogenic isotopes are characterized by relative variations that are controlled, in each geological system, by the addition of a radiogenic component of an isotope, derived from the decay of a radioactive parent, to the same radiogenic isotope already present in the Earth since its formation 4.55 Gyr ago. This relative variation is usually expressed as the ratio of a radiogenic isotope of an element to a non-radiogenic isotope of the same element. The ratio of these two isotopes has increased since the Earth formation and the magnitude of its variations depends on the radioactive/ radiogenic isotope ratios in different geological systems and on the time elapsed since the system has formed. The Earth is 4.55 Gyr old and has evolved from an initially homogeneous isotopic composition to reservoirs (e.g., mantle, crust) and crustal rocks with very variable radioactive/radiogenic isotope ratios due to magmatic, metamorphic, weathering, atmospheric and biologic processes, among others. This has resulted in extremely large variations of radiogenic isotopes in rocks and reservoirs of the Earth which can track various geological processes. In ore geology, stable radiogenic isotopes are best suited for tracing metal (e.g., Pb, Os) sources from different rocks and reservoirs (e.g., mantle, upper crust, lower crust), fluid-rock interactions (i.e., the hydrothermal plumbing system), or magma-host rock interactions (e.g., host rock assimilation by magmas associated with magmatic-hydrothermal deposits). Radioactive-radiogenic isotope systems allow us to determine also absolute ages of suitable minerals that are found in mineral deposits. This is an essential information in metallogeny that allows us to link the formation of a mineral deposit to a specific geological process and/or to specific periods of the Earth’s history. We discuss various dating methods that are extensively applied to date mineral deposits. These methods can be subdivided into those that allow a direct dating of ore minerals (e.g., RedOs dating of molybdenite, UdPb dating of cassiterite) and those that allow dating of minerals that are demonstrably related with the mineralization (e.g., UdPb dating of zircon from magmatic rocks associated with magmatic-hydrothermal deposits; Ar/Ar dating of K-bearing minerals resulting from alteration associated with various types of mineral deposits). We discuss pros and cons of using these various methods and also mention methods that are less used (because potentially less accurate and precise), but sometimes represent the only possibility to provide an age to deposit types that are notoriously difficult to date (e.g., MVT and Carlin-type deposits). We highlight the power of both stable radiogenic and non-radiogenic isotopes in unravelling the genesis of metallic mineral deposits through a series of conceptual and real examples applied to a broad range of mineral deposit types such as porphyry systems (i.e., porphyry deposits, high- and intermediate-sulfidation epithermal deposits, skarn, carbonate replacement deposits, sediment-hosted Au deposits), low-sulfidation epithermal deposits, IOCG deposits, ortho-magmatic deposits, volcanic-hosted massive sulfide deposits (VHMS), sediment-hosted deposits (stratiform copper, MVT), and supergene deposits. In the third part of the chapter, we discuss the use of transition metal stable non-radiogenic isotopes to mineral deposits. Although in its infancy, the application of transition metal isotopes to mineral deposit investigation is quickly growing because these isotopes allow us to address different aspects of the formation of mineral deposits compared to radiogenic isotopes. In particular, isotopes of transition metals (like stable isotopes of light elements) undergo mass-dependent fractionation processes that may be associated with different types of equilibrium and non-equilibrium chemical, physical and biological reactions occurring during the formation of mineral deposits. We focus on the applications of the isotopes of Cu, Fe and Zn to various deposit types, because isotopes of these transition metals are those that have been most extensively used in mineral deposit studies. Mass-independent fractionation may also occur for isotopes of some elements and could be a developing field that has not yet been extensively explored in the study of mineral deposits.
more »
« less
- Award ID(s):
- 2233425
- PAR ID:
- 10589467
- Publisher / Repository:
- Elsevier
- Date Published:
- ISBN:
- 9780323997638
- Page Range / eLocation ID:
- 949 to 1018
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
Published Sn isotope data along with 150 new analyses of cassiterite and four granite analyses constrain two major tin isotope fractionation steps associated with (1) separation of tin from the magma/orthomagmatic transitional environment and (2) hydrothermal activity. A distinct Sn isotope difference across deposit type, geological host rocks, and time of ore deposit formation demonstrates that the difference in the mean δ124Sn value represents the operation of a unified process. The lower Sn isotope values present in both residual igneous rocks and pegmatite suggest that heavier Sn isotopes were extracted from the system during orthomagmatic fluid separation, likely by F ligands with Sn. Rayleigh distillation models this first F ligand-induced fractionation. The subsequent development of the hydrothermal system is characterized by heavier Sn isotope composition proximal to the intrusion, which persists in spite of Sn isotope fractionating towards isotopically lighter Sn during hydrothermal evolution.more » « less
-
Phosphate rock bears both geologically and environmentally significant information. Rare earth elements and yttrium (i.e., REY) characteristics have been commonly used for reconstructing the redox conditions of depositional environments of and the effects of post-depositional diagenetic alteration on phosphate rock. In addition, phosphate rock is typically enriched in a range of trace elements such as uranium (U) and cadium (Cd) that can be dispersed as contaminants into the environment with phosphate mining and phosphate fertilizer application. Here we report the lead (Pb) isotope compositions combined with Pb and REY concentrations of both global sedimentary and igneous phosphate rocks, aiming to evalute the geological origin of phosphate rocks over time and the potential of using them for environmental tracing. Phopshate rocks samples analyzed in this study were sourced from major economic phosphate deposits in the world, including China, Southern Tethys (e.g., Morocco, Tunisia, Israel), the U.S., India, South Africa and Russia. Our results show a wide range of 208Pb/204Pb (35.70 to 60.58), 207Pb/204Pb (15.20 to 18.25), and 206Pb/204Pb (16.369 to 71.806) ratios in phosphate rocks, with sedimentary phosphate rocks being significantly more radiogenic than igneous rocks. The majority of the sedimentray phosphate rocks show a notable isotopic overprinting by non-radiogenic terrestrial Pb, except for those from Israel and Morocco that have the most radiogenic Pb isotope compositions. Correspondingly, phosphate rocks with more radiogenic Pb isotope ratios show relatively pristine seawater REY features, likely suggesting their preservation of the original oxic seawater conditions and/or minimal diagenetic alteration. In contrast, phosphate rocks with less radiogenic Pb isotope compositions show REY indications for more anoxic seawater redox conditions and/or greater diagenetic alteration. We further evaluate the potential utility of Pb isotopes for tracing the associated contamination with phosphate rock mining and fertilizer application in the environment. In most cases, the radiogenic Pb isotope composition of phosphate rocks and corresponding P-fertilizers is distinctive from both natural crustal Pb and major anthropogenic Pb sources (e.g., Pb ore deposits and pesticides), which provides a great advantage for applying Pb isotopes as environmental tracers for metal(loid) contamination from phosphate sources. The combination of Pb isotope ratios and REY proxies could further constrain the Pb source discrimination. Overall, this study provides new Pb isotopic and REY geochemical data on global phosphate rocks and fertilizers, which lays the groundwork for future regional and local studies on both their geological and environmental implications.more » « less
-
Abstract The Oligocene Latir magmatic center in northern New Mexico is an exceptionally well-exposed volcanoplutonic complex that hosts a variety of magmatic-hydrothermal deposits, ranging from relatively deep, F-rich porphyry Mo mineralization to shallower epithermal deposits. We present new whole-rock chemical and isotopic data for plutonic rocks from the Latir magmatic center, including extensive sampling of drill core samples of intrusive rocks from the Questa porphyry Mo deposit. These data document temporal chemical trends of porphyry-related mineralization that occurred after caldera-forming magmatism and during postcaldera batholith assembly. Silicic magmas were generated multiple times throughout the history of the Latir magmatic center, but few are associated with the formation of a mineral deposit. Whole-rock trace element ratios and Sr, Nd, and Pb isotope compositions vary throughout the protracted history of silicic magmatism. The caldera-forming ignimbrite and early phase of postcaldera intrusions are unmineralized, more enriched in high field strength elements, and generally contain less radiogenic Sr and Pb and more radiogenic Nd than later intrusions. The Questa porphyry Mo deposit formed immediately after the most isotopically primitive phase of the batholith was assembled, ruling out simple reworking of juvenile mantle-derived crust as the source for mineralizing magmas. Rhyolite dikes associated with polymetallic sulfide deposits intruded ~800 k.y. after Mo mineralization, and Nd isotope data indicate that these dikes are associated with different batches of magma and are unrelated to the Mo-mineralizing intrusions at the Questa mine. Together, these data indicate that the source of magmas changed significantly throughout the 10-m.y. history of the magmatic center. We assess multiple genetic models for porphyry-related magmatism against this data set, favoring models with discrete periods of magma genesis from a deep hybridized zone in the lower crust giving rise to the punctuated periods of mineralization. These observations suggest that the formation of mineral deposits within a central magmatic locus is likely the result of the piecemeal assembly of individual hydrothermal-magmatic systems, and that distal and younger polymetallic mineralization commonly observed near known porphyry deposits represents decoupled processes.more » « less
-
Abstract Iron oxide copper-gold (IOCG) and iron oxide-apatite (IOA) deposits are major sources of Fe, Cu, and Au. Magnetite is the modally dominant and commodity mineral in IOA deposits, whereas magnetite and hematite are predominant in IOCG deposits, with copper sulfides being the primary commodity minerals. It is generally accepted that IOCG deposits formed by hydrothermal processes, but there is a lack of consensus for the source of the ore fluid(s). There are multiple competing hypotheses for the formation of IOA deposits, with models that range from purely magmatic to purely hydrothermal. In the Chilean iron belt, the spatial and temporal association of IOCG and IOA deposits has led to the hypothesis that IOA and IOCG deposits are genetically connected, where S-Cu-Au–poor magnetite-dominated IOA deposits represent the stratigraphically deeper levels of S-Cu-Au–rich magnetite- and hematite-dominated IOCG deposits. Here we report minor element and Fe and O stable isotope abundances for magnetite and H stable isotope abundances for actinolite from the Candelaria IOCG deposit and Quince IOA prospect in the Chilean iron belt. Backscattered electron imaging reveals textures of igneous and magmatic-hydrothermal affinities and the exsolution of Mn-rich ilmenite from magnetite in Quince and deep levels of Candelaria (>500 m below the bottom of the open pit). Trace element concentrations in magnetite systematically increase with depth in both deposits and decrease from core to rim within magnetite grains in shallow samples from Candelaria. These results are consistent with a cooling trend for magnetite growth from deep to shallow levels in both systems. Iron isotope compositions of magnetite range from δ56Fe values of 0.11 ± 0.07 to 0.16 ± 0.05‰ for Quince and between 0.16 ± 0.03 and 0.42 ± 0.04‰ for Candelaria. Oxygen isotope compositions of magnetite range from δ18O values of 2.65 ± 0.07 to 3.33 ± 0.07‰ for Quince and between 1.16 ± 0.07 and 7.80 ± 0.07‰ for Candelaria. For cogenetic actinolite, δD values range from –41.7 ± 2.10 to –39.0 ± 2.10‰ for Quince and from –93.9 ± 2.10 to –54.0 ± 2.10‰ for Candelaria, and δ18O values range between 5.89 ± 0.23 and 6.02 ± 0.23‰ for Quince and between 7.50 ± 0.23 and 7.69 ± 0.23‰ for Candelaria. The paired Fe and O isotope compositions of magnetite and the H isotope signature of actinolite fingerprint a magmatic source reservoir for ore fluids at Candelaria and Quince. Temperature estimates from O isotope thermometry and Fe# of actinolite (Fe# = [molar Fe]/([molar Fe] + [molar Mg])) are consistent with high-temperature mineralization (600°–860°C). The reintegrated composition of primary Ti-rich magnetite is consistent with igneous magnetite and supports magmatic conditions for the formation of magnetite in the Quince prospect and the deep portion of the Candelaria deposit. The trace element variations and zonation in magnetite from shallower levels of Candelaria are consistent with magnetite growth from a cooling magmatic-hydrothermal fluid. The combined chemical and textural data are consistent with a combined igneous and magmatic-hydrothermal origin for Quince and Candelaria, where the deeper portion of Candelaria corresponds to a transitional phase between the shallower IOCG deposit and a deeper IOA system analogous to the Quince IOA prospect, providing evidence for a continuum between both deposit types.more » « less
