An official website of the United States government
<sc>A</sc>bstract We introduce a simple synthetic strategy to selectively degrade bottlebrush networks derived from well‐defined poly(4‐methylcaprolactone) (P4MCL) bottlebrush polymers. Functionalization of the hydroxyl groups present at the terminal ends of P4MCL side chains withα‐lipoic acid resulted in bottlebrush polymers having a range of molecular weights (Mn = 45–2200 kg mol−1) and a tunable number of reactive dithiolane chain ends. These functionalized chain ends act as efficient crosslinkers due to radical ring‐opening of the dithiolane rings under UV light. The resulting redox‐active disulfide crosslinks enable mild electrochemical or chemical degradation of the SS crosslinks to regenerate the starting bottlebrush polymer. P4MCL side chains and the disulfides can be degraded simultaneously using harsher reducing conditions. This combination of bottlebrush architecture with facile disulfide crosslinking presents a versatile platform for preparing highly tunable elastomers that undergo controlled degradation under mild conditions.
more »
« less
Enhanced Degradation of Vinyl Copolymers Based on Lipoic Acid
ABSTRACT The introduction of degradable units into the backbone of commodity vinyl polymers represents a major opportunity to address the societal challenge of plastic waste and polymer recycling. Previously, we reported the facile copolymerization ofα‐lipoic acid derivatives containing 1,2‐dithiolane rings with vinyl monomers leading to the incorporation of degradable S–S disulfide bonds along the backbone at relatively high dithiolane monomer feed ratios. To further enhance the recyclability of these systems, here we describe a facile and user‐friendly strategy for backbone degradation at significantly lower dithiolane loading levels through cleavage of both SS and SC backbone units. Copolymers ofn‐butyl acrylate (nBA) or styrene (St) with small amounts of eitherα‐lipoic acid (LA) or ethyl lipoate (ELp) dissolved in DMF were observed to undergo efficient degradation when heated at 100°C under air. For example, at only 5 mol% ELp, a high molecular weight poly(ELp‐co‐nBA) (Mn = 62 kg mol−1) degraded to low molecular weight oligomers (Mn = 3.2 kg mol−1) by simple heating in DMF. In contrast, extended heating of either poly(nBA) or poly(St) homopolymers under the same conditions did not lead to any change in molecular weight or cleavage of the C–C backbone. This novel approach allows for the effective degradation of vinyl‐based polymers with negligible impact on properties and performance due to the low levels of dithiolane incorporation.
more »
« less
- Award ID(s):
- 1933487
- PAR ID:
- 10592882
- Publisher / Repository:
- Wiley
- Date Published:
- Journal Name:
- Journal of Polymer Science
- Volume:
- 63
- Issue:
- 6
- ISSN:
- 2642-4150
- Page Range / eLocation ID:
- 1345 to 1351
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
Abstract α‐Lipoic acid (LA) has recently emerged as an attractive, inexpensive monomer for synthesizing degradable polymers via ring‐opening of its 1,2‐dithiolane, introducing easily cleavable disulfide linkages into polymer backbones. Reversible addition–fragmentation chain transfer (RAFT) copolymerization with vinyl monomers enables access to degradable poly(disulfide)s with controlled molecular weights. However, conventional thermal RAFT methods suffer from oxygen sensitivity, limited LA incorporation (<40 mol%), and modest degrees of polymerization (DP < 300). Here, we report an oxygen‐tolerant, red‐light‐driven RAFT approach using methylene blue (MB⁺) as a photosensitizer, and triethanolamine (TEOA) as a sacrificial electron donor. This photoRAFT strategy affords well‐defined LA–vinyl copolymers with DPs exceeding 6000, relatively low dispersities (Đ= 1.1–1.6), and LA incorporations up to 68 mol%. The method is compatible with a broad range of functional comonomers, including hydrophilic, charged, and zwitterionic acrylates and acrylamides, yielding water‐soluble degradable polymers. The resulting copolymers are readily degradable by disulfide‐reducing agents, UV light, and ambient sunlight. Overall, this mild and efficient platform overcomes the limitations of thermal RAFT, providing improved access to functional, high‐molecular‐weight degradable LA copolymers, suggesting potential applications as biocompatible plastics and biomedical materials.more » « less
-
Abstract Leveraging electrochemistry to degrade robust polymeric materials has the potential to impact society's growing issue of plastic waste. Herein, we develop an electrocatalytic oxidative degradation of polyethers and poly(vinyl ethers) via electrochemically mediated hydrogen atom transfer (HAT) followed by oxidative polymer degradation promoted by molecular oxygen. We investigated the selectivity and efficiency of this method, finding our conditions to be highly selective for polymers with hydridic, electron‐rich C−H bonds. We leveraged this reactivity to degrade polyethers and poly(vinyl ethers) in the presence of polymethacrylates and polyacrylates with complete selectivity. Furthermore, this method made polyacrylates degradable by incorporation of ether units into the polymer backbone. We quantified degradation products, identifying up to 36 mol % of defined oxidation products, including acetic acid, formic acid, and acetaldehyde, and we extended this method to degrade a polyether‐based polyurethane in a green solvent. This work demonstrates a facile, electrochemically‐driven route to degrade polymers containing ether functionalities.more » « less
-
Abstract A versatile synthetic platform is reported that affords high molecular weight graft copolymers containing polydimethylsiloxane (PDMS) backbones and vinyl‐based polymer side chains with excellent control over molecular weight and grafting density. The synthetic approach leverages thiol‐ene click chemistry to attach an atom‐transfer radical polymerization (ATRP) initiator to a variety of commercially available poly(dimethylsiloxane‐co‐methylvinylsiloxane) backbones (PDMS‐co‐PVMS), followed by controlled radical polymerization with a wide scope of vinyl monomers. Selective degradation of the siloxane backbone with tetrabutylammonium fluoride confirmed the controlled nature of side‐chain growth via ATRP, yielding targeted side‐chain lengths for copolymers containing up to 50% grafting density and overall molecular weights in excess of 1 MDa. In addition, by using a mixture of thiols, grafting density and functionality can be further controlled by tuning initiator loading along the backbone. For example, solid‐state fluorescence of the graft copolymers was achieved by incorporating a thiol‐containing fluorophore along the siloxane backbone during the thiol‐ene click reaction. This simple synthetic platform provides facile control over the properties of a wide variety of grafted copolymers containing flexible PDMS backbones and vinyl polymer side chains.more » « less
-
ABSTRACT Bottlebrush (BB) polymers with polydimethylsiloxane (PDMS) side‐chains exhibit supersoft moduli (E < 100 kPa) without solvent, making them promising tissue‐mimetic materials for biomedical applications. While larger backbones and side‐chains enhance softness, synthetic limitations have constrained their molecular weight. We report a graft‐through method to access ultra‐high molecular weight PDMS BB polymers (~1–20 million g mol−1). Central to this was the design of a norbornene‐pyrrolidine aryllithium initiator for the anionic ring‐opening of hexamethylcyclotrisiloxane (D3), yielding monofunctionalized PDMS macromonomers (MMs) with molecular weights from 1–30 kg mol−1. Subsequent ring‐opening metathesis polymerization (ROMP) produced BB homopolymers within minutes (t ≤ 5 min) and with low dispersity (Đ < 1.3). The ‐C‐Si‐O‐ linkage between the backbone and side‐chains provided improved chemical stability over earlier ‐C‐O‐Si‐ analogues. These MMs were also used to create a linear‐bottlebrush‐linear block copolymer, forming a supersoft (E = 79 kPa), thermoplastic elastomer with excellent elastic recovery (~96%). This platform enables the synthesis of ultra‐high molecular weight graft (co‐)polymers, advancing the study of extreme structure–property relationships and supporting the development of novel soft materials for bio‐interfacing.more » « less
- Free Publicly Accessible Full Text
-
Accepted Manuscript
- Journal Article:
- https://doi.org/10.1002/pol.20241085
