An official website of the United States government
Solid phase epitaxy (SPE) has been widely employed for various thin-film materials, making it valuable for industrial applications due to its scalability. In complex oxides, SPE has been limited to a few materials because of the challenges in maintaining stoichiometric control during growth, particularly when volatile phases are present at high temperatures. Here, we investigate the impact of encapsulation layers on the SPE of complex oxides, using SrRuO3 (SRO) as a model system. An amorphous SRO layer was deposited on a SrTiO3 (STO) substrate, followed by the transfer of a single-crystalline STO membrane as an encapsulation layer in order to suppress the evaporation of volatile species (RuO2) during the SPE process. Whereas both encapsulated and unencapsulated SRO layers were successfully crystallized, the unencapsulated films suffered a substantial loss of Ru ions—exceeding 20%—compared to their encapsulated counterparts. This loss of Ru ions led to a loss of metallicity in the unencapsulated SRO layers, whereas the encapsulated layers retained their metallic ferromagnetic properties. This study demonstrates that the encapsulation provided by oxide membranes effectively suppresses stoichiometric loss during SPE, presenting a new strategy in stabilizing a broader class of functional oxides as epitaxial thin films.
more »
« less
Twinning microstructure in the solid-phase epitaxial crystallization of BaTiO3
Amorphous BaTiO3 layers deposited on SrTiO3 (001) substrates at room temperature were subsequently crystallized using solid phase epitaxy (SPE). Heating an initially amorphous BaTiO3 layer in air at 650 °C for 3 h resulted in crystallization with components in two distinct crystallographic orientation relationships with respect to the substrate. Part of the volume of the BaTiO3 layer crystallized in a cube-on-cube relationship with the substrate. Other volumes crystallized in four variants of a 70.5° rotation about ⟨110⟩, resulting in a ⟨221⟩ surface normal in each case. Each of these four variants forms a Σ = 3 coincident site lattice with respect to the SrTiO3 substrate and the cube-on-cube oriented BaTiO3. Heating for the same duration and temperature in a reducing gas atmosphere resulted in the formation of polycrystalline BaTiO3 with no preferred crystallographic orientation. The dependence on the gas atmosphere indicates that it may be possible to tune the annealing time, temperature, and atmosphere to produce a single crystalline BTO on STO by SPE or produce a desired distribution of orientations.
more »
« less
- Award ID(s):
- 1720415
- PAR ID:
- 10594849
- Publisher / Repository:
- American Institute of Physics
- Date Published:
- Journal Name:
- APL Materials
- Volume:
- 11
- Issue:
- 8
- ISSN:
- 2166-532X
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
The crystallization of complex oxide thin films on amorphous substrates presents a significant challenge because of the lack of long-range order in these substrates and the subsequent difficulty in controlling crystal growth. Nanocrystals with similar crystal structure have the potential to serve as nucleation sites for crystallization and can facilitate this integration. Isolated nanocrystals of strontium titanate (SrTiO3) can be produced on amorphous SiO2 surfaces through crystallization and ripening of initially amorphous layers of SrTiO3. The resulting SrTiO3 nanocrystals exhibit characteristic lateral radii ranging from tens to hundreds of nm and a consistent average height of 1–2 nm across this range. The area density and mean radii of the nanocrystals can be selected by adjusting the deposition and heating parameters, including the amount of deposited SrTiO3 and the heating duration. The heating-time dependence of the area density and mean radii of the nanocrystals is consistent with predictions based on Ostwald ripening kinetics. The selection of these parameters facilitates the use of SrTiO3 nanocrystals as nucleation sites to crystallize the subsequently deposited layer.more » « less
-
null (Ed.)A multistep phase sequence following the crystallization of amorphous Al2O3 via solid-phase epitaxy (SPE) points to methods to create low-defect-density thin films of the metastable cubic γ-Al2O3 polymorph. An amorphous Al2O3 thin film on a (0001) α-Al2O3 sapphire substrate initially transforms upon heating to form epitaxial γ-Al2O3, followed by a transformation to monoclinic θ-Al2O3, and eventually to α-Al2O3. Epitaxial γ-Al2O3 layers with low mosaic widths in X-ray rocking curves can be formed via SPE by crystallizing the γ-Al2O3 phase from amorphous Al2O3 and avoiding the microstructural inhomogeneity arising from the spatially inhomogeneous transformation to θ-Al2O3. A complementary molecular dynamics (MD) simulation indicates that the amorphous layer and γ-Al2O3 have similar Al coordination geometry, suggesting that γ-Al2O3 forms in part because it involves the minimum rearrangement of the initially amorphous configuration. The lattice parameters of γ-Al2O3 are consistent with a structure in which the majority of the Al vacancies in the spinel structure occupy sites with tetrahedral coordination, consistent with the MD results. The formation of Al vacancies at tetrahedral spinel sites in epitaxial γ-Al2O3 can minimize the epitaxial elastic deformation of γ-Al2O3 during crystallization.more » « less
-
In this work, we demonstrate the growth and phase stabilization of ultrawide bandgap polycrystalline rutile germanium dioxide (GeO2) thin films. GeO2 thin films were deposited using RF magnetron sputtering on r-plane sapphire (Al2O3) substrates. As-deposited films were x-ray amorphous. Postdeposition annealing was performed at temperatures between 650 and 950 °C in an oxygen or nitrogen ambient. Annealing at temperatures from 750 to 950 °C resulted in mixed-phase polycrystalline films containing tetragonal (rutile) GeO2, hexagonal (α-quartz) GeO2, and/or cubic (diamond) germanium (Ge). When nitrogen was used as the anneal ambient, mixed GeO2 phases were observed. In contrast, annealing in oxygen promoted stabilization of the r-GeO2 phase. Grazing angle x-ray diffraction showed a preferred orientation of (220) r-GeO2 for all crystallized films. The combination of O2 annealing and O2 flux during growth resulted in r-GeO2 films with highly preferential alignment. Using electron microscopy, we observed an interfacial layer of hexagonal-oriented GeO2 with epitaxial alignment to the (11¯02) Al2O3 substrate, which may help stabilize the top polycrystalline r-GeO2 film.more » « less
-
Abstract High‐spatial resolution textural and geochemical data from thin slip surfaces in exhumed fault zones archive thermal and rheological signatures of past fault slip. A network of minor, glossy, iridescent silica fault mirrors (FMs) cut Paleoproterozoic gneiss in the Wasatch fault zone (WFZ), Utah. We report field to nanoscale observations from scanning electron microscopy, electron backscattered diffraction, and transmission electron microscopy with energy‐dispersive X‐ray spectroscopy of a silica FM to infer deformation mechanisms during FM development. The FM volume comprises a ∼40–90 μm‐thick basal layer of sintered, µm‐ to nm‐diameter silica particles with polygonal to anhedral morphologies, pervasive crystalline Ti‐bearing phases containing measurable N, and µm‐ to nm‐scale void spaces. Silica particles lack shape and crystallographic preferred orientation and some are predominantly amorphous with internal crystalline domains. The basal layer is overlain by a ∼10–130 nm‐thick, chemically heterogeneous, amorphous film at the FM interface. Mass balance calculations of Ti in the basal layer and host rock indicate the FM volume can be sourced from the underlying gneiss. Multiple textural and geochemical lines of evidence, including N substitution in Ti‐bearing phases, support temperature rise during deformation, associated amorphization of host gneiss, and creation of the FM volume. During thermal decay, interstitial anatase and titanite fully crystallized, silica textures capture their incipient crystallization, and some residual elements are solidified in the nanofilm. Our results support a mechanism of weakening and re‐strengthening of silica FM during fault slip and, together with data from adjacent hematite FMs, record shallow, ancient microseismicity in the WFZ.more » « less
