skip to main content
US FlagAn official website of the United States government
dot gov icon
Official websites use .gov
A .gov website belongs to an official government organization in the United States.
https lock icon
Secure .gov websites use HTTPS
A lock ( lock ) or https:// means you've safely connected to the .gov website. Share sensitive information only on official, secure websites.

Explore Research Products in the PAR
It may take a few hours for recently added research products to appear in PAR search results.


Title: Synthesis and characterization of bismuth ferrite particles using a nano-agitator bead mill
Bismuth ferrite (BiFeO3) nanocomposites were synthesized using a novel nano-agitator bead milling method followed by calcination. Bismuth oxide and iron oxide nanoparticles were mixed in a stoichiometric ratio and milled for 3 h and calcined at 650 °C in air. X-ray diffraction with Rietveld refinement, scanning electron microscopy, and transmission electron microscopy techniques were used to elucidate the structure of BiFeO3. The particle diameter was found to be ∼17 nm. Magnetic and electrical measurements were performed, and these results were compared with those of similar methods. Mostly, BiFeO3 was obtained with minor secondary phase formation. The resulting powder was weakly ferromagnetic with a remnant magnetization of 0.078 emu/g. This can be attributed to residual strain and defects introduced during the milling process. Electrical testing revealed a high leakage current density that is typical of undoped bismuth ferrite.  more » « less
Award ID(s):
1827690
PAR ID:
10597197
Author(s) / Creator(s):
; ; ; ;
Publisher / Repository:
American Institute of Physics
Date Published:
Journal Name:
AIP Advances
Volume:
13
Issue:
3
ISSN:
2158-3226
Format(s):
Medium: X
Sponsoring Org:
National Science Foundation
More Like this
  1. ; ; ; ; ; ; (, APL Materials)
    Bismuth ferrite layers, ∼200-nm-thick, are deposited on SrRuO3-coated DyScO3(110)o substrates in a step-flow growth regime via adsorption-controlled molecular-beam epitaxy. Structural characterization shows the films to be phase pure with substrate-limited mosaicity (0.012° x-ray diffraction ω-rocking curve widths). The film surfaces are atomically smooth (0.2 nm root-mean-square height fluctuations) and consist of 260-nm-wide [11¯1]o-oriented terraces and unit-cell-tall (0.4 nm) step edges. The combination of electrostatic and symmetry boundary conditions promotes two monoclinically distorted BiFeO3 ferroelectric variants, which self-assemble into a pattern with unprecedentedly coherent periodicity, consisting of 145 ± 2-nm-wide stripe domains separated by [001]o-oriented 71° domain walls. The walls exhibit electrical rectification and enhanced conductivity. 
    more » « less
  2. ; ; ; (, Colloids and Surfaces A: Physicochemical and Engineering Aspects)
    Bismuth oxide nanomaterials are increasingly recognized for their promising electronic and optical properties, particularly in electrochemical and biomedical applications. This study demonstrates that various bismuth oxide nanostructures can be synthesized through pulsed laser ablation in liquids (PLAL) by adjusting the concentration of dissolved gases from ambient conditions. Structural and compositional analyses were performed using x-ray diffraction, Raman spectroscopy, FTIR spectroscopy, and morphological investigations were conducted using atomic force microscopy and transmission electron microscopy. Our findings indicate that factors such as dissolved gases, laser fluence, and nanoparticle aging are crucial in determining the final structure and composition of the resulting nanomaterial. The phases observed ranged from spherical metallic bismuth nanoparticles to monoclinic bismuth oxide nanowire bundles, and orthorhombic bismuth carbonate oxide nanosheets. Dissolved gases are shown to influence not only the primary particles formed immediately after ablation, but also significantly impact the aging process of the colloid as well. Additionally, fluence plays an important role in the production of reactive oxygen species, thereby influencing the reactive pathways experienced by the ablated material and its subsequent formation into nanostructures. A notable result, emphasizing the significance of factors such as liquid environment and fluence when performing PLAL on reactive targets like bismuth, is seen in high fluence (20 J/cm) samples under ambient conditions. These samples initially display an amalgamation of BiO nanowire bundles and carbonate nanosheets, which upon aging, transition to predominantly bismuth oxide nanowire bundles. This contrasts with samples produced in a saturated CO environment where bismuth carbonate nanosheets remain highly stable in the colloid. 
    more » « less
  3. ; ; ; (, Physica Scripta)
    Abstract Surface segregation is a ubiquitous phenomenon driven by minimization of the total free energy. In this paper we study surface segregation in multicomponent magnetic Bismuth ferrite nanoparticles alloyed with varying amounts of Dysprosium, Zinc and Titanium. We employ surface and bulk sensitive spectroscopic probes to unravel a significant surface segregation of Bismuth oxide and Titanium oxide. High coercive fields of BiFe0.95Ti0.05O3(BFTO) and BiFe0.96(Zn, Ti)0.02O3(BFZTO) at room temperature reveal that they have a strong exchange bias. This suggests that the Titanium oxide is magnetically active, and there is a Ti induceddoferromagnetism in action between these nanoparticles. We show, with the addition of Dy2O3, the Ti induceddoferromagnetism is suppressed making (BDFZTO) superparamagnetic. We observe that all three differently alloyed Bismuth ferrite nanoparticles show a non-saturating paramagnetic background. 
    more » « less
  4. ; ; ; ; ; (, Nanomaterials)
    The development of high-performance hydrogen peroxide (H2O2) sensors is critical for various applications, including environmental monitoring, industrial processes, and biomedical diagnostics. This study explores the development of efficient and selective H2O2 sensors based on bismuth oxide/bismuth oxyselenide (Bi2O3/Bi2O2Se) nanocomposites. The Bi2O3/Bi2O2Se nanocomposites were synthesized using a simple solution-processing method at room temperature, resulting in a unique heterostructure with remarkable electrochemical characteristics for H2O2 detection. Characterization techniques, including powder X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), and scanning electron microscopy (SEM), confirmed the successful formation of the nanocomposites and their structural integrity. The synthesis time was varied to obtain the composites with different Se contents. The end goal was to obtain phase pure Bi2O2Se. Electrochemical measurements revealed that the Bi2O3/Bi2O2Se composite formed under optimal synthesis conditions displayed high sensitivity (75.7 µA µM−1 cm−2) and excellent selectivity towards H2O2 detection, along with a wide linear detection range (0–15 µM). The superior performance is attributed to the synergistic effect between Bi2O3 and Bi2O2Se, enhancing electron transfer and creating more active sites for H2O2 oxidation. These findings suggest that Bi2O3/Bi2O2Se nanocomposites hold great potential as advanced H2O2 sensors for practical applications. 
    more » « less
  5. ; ; ; ; ; (, Journal of Vacuum Science & Technology A)
    Focused Ga + ion milling of lightly Si-doped, n-type Ga 2 O 3 was performed with 2–30 kV ions at normal incidence and beam currents that were a function of beam voltage, 65 nA for 30 kV, 26 nA for 10 kV, 13 nA for 5 kV, and 7.1 nA for 2 kV, to keep the milling depth constant at 100 nm. Approximate milling rates were 15, 6, 2.75, and 1.5  μm 3 /s for 30, 10, 5, and 2 kV, respectively. The electrical effects of the ion damage were characterized by Schottky barrier height and diode ideality factor on vertical rectifier structures comprising 10  μm epitaxial n-Ga 2 O 3 on n + Ga 2 O 3 substrates, while the structural damage was imaged by transmission electron microscopy. The reverse bias leakage was largely unaffected even by milling at 30 kV beam energy, while the forward current-voltage characteristics showed significant deterioration at 5 kV, with an increase in the ideality factor from 1.25 to 2.25. The I–V characteristics no longer showed rectification for the 30 kV condition. Subsequent annealing up to 400 °C produced substantial recovery of the I–V characteristics for all beam energies and was sufficient to restore the initial ideality factor completely for beam energies up to 5 kV. Even the 30 kV-exposed rectifiers showed a recovery of the ideality factor to 1.8. The surface morphology of the ion-milled Ga 2 O 3 was smooth even at 30 kV ion energy, with no evidence for preferential sputtering of the oxygen. The surface region was not amorphized by extended ion milling (35 min) at 5 kV with the samples held at 25 °C, as determined by electron diffraction patterns, and significant recovery of the lattice order was observed after annealing at 400 °C. 
    more » « less
  • Citation Formats
  • MLA
  • APA
  • Chicago
  • BibTeX
  • Save / Share this Record
  • Send to Email