An official website of the United States government
Abstract In the carbon nanotubes film/graphene heterostructure decorated with catalytic Pt nanoparticles using atomic layer deposition (Pt-NPs/CNTs/Gr) H 2 sensors, the CNT film determines the effective sensing area and the signal transport to Gr channel. The former requires a large CNT aspect ratio for a higher sensing area while the latter demands high electric conductivity for efficient charge transport. Considering the CNT’s aspect ratio decreases, while its conductivity increases ( i.e. , bandgap decreases), with the CNT diameter, it is important to understand how quantitatively these effects impact the performance of the Pt-NPs/CNTs/Gr nanohybrids sensors. Motivated by this, this work presents a systematic study of the Pt-NPs/CNTs/Gr H 2 sensor performance with the CNT films made from different constituent CNTs of diameters ranging from 1 nm for single-wall CNTs, to 2 nm for double-wall CNTs, and to 10–30 nm for multi-wall CNTs (MWCNTs). By measuring the morphology and electric conductivity of SWCNT, DWCNT and MWCNT films, this work aims to reveal the quantitative correlation between the sensor performance and relevant CNT properties. Interestingly, the best performance is obtained on Pt-NPs/MWCNTs/Gr H 2 sensors, which can be attributed to the compromise of the effective sensing area and electric conductivity on MWCNT films and illustrates the importance of optimizing sensor design.
more »
« less
Atomic-Layer Deposition of the Single-Atom Pt Catalyst on Vertical Graphene for H 2 Sensing
Single-atom catalysts have the advantage of high chemical efficiency, which requires atomic-scale control during catalyst formation. In order to address this challenge, this work explores the synthesis of single-atom platinum (SA-Pt) catalysts using atomic-layer deposition (ALD) on vertical graphene (VG), in which a large number of graphene edges serve as energetically favorable nucleation sites for SA-Pt, as predicted by density functional theory calculations. Interestingly, SA-Pt has been achieved on VGs at low ALD cycle numbers of up to 60. With a further increase in the number of ALD cycles, an increasing number of Pt clusters with diameters <2 nm and Pt nanoparticles (NPs) with diameters >2 nm become dominant (nano-Pt @VG). This is in contrast to the observation of predominantly nano-Pt on other carbon nanostructures, such as carbon nanotubes and monolayer graphene, under the same ALD growth conditions, indicating that the edge states on VG indeed play a critical role in facilitating the formation of SA-Pt. Profound differences are revealed in a comparative study on H2 sensing. SA-Pt exhibits both a higher sensitivity and faster response than its nano-Pt counterpart by more than an order of magnitude, illustrating the high catalytic efficiency of SAPt and its potential for gas sensing and a variety of other catalytic applications.
more »
« less
- PAR ID:
- 10599054
- Publisher / Repository:
- ACS
- Date Published:
- Journal Name:
- ACS Applied Nano Materials
- Volume:
- 7
- Issue:
- 19
- ISSN:
- 2574-0970
- Page Range / eLocation ID:
- 22605 to 22616
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
The scalable and facile preparation of single-atom catalysts remains a critical challenge. Here, we introduce Diluted Atomic Layer Deposition (DALD), a unique approach for synthesizing supported metal catalysts with precisely tunable loadings. Unlike conventional metal deposition by ALD which uses pure metal precursors, DALD employs a diluted precursor mixture, combining organometallic precursors with the corresponding free ligand in controlled ratios. The method enables precise control over metal loadings, allowing the synthesis of structures ranging from nanoparticles to isolated single atoms, as exemplified by Ir, Rh, and Pt on high-surface-area γ-Al2O3. With its inherent simplicity and exceptional efficiency in metal precursor utilization, DALD represents a highly scalable strategy, unlocking opportunities for integrating single-atom catalysts into industrial processes.more » « less
-
null (Ed.)Single-atom catalysts (SACs) exhibit excellent performance for various catalytic reactions but it is still challenging to have adequate total activity for practical applications. Here we report the high-valence, square planar Pt 1 –O 4 as an active site that enables significantly to increase the total activity of the Pt 1 /Fe 2 O 3 SAC with a Pt loading of only ∼30 ppm, which is similar to that of a 1.0 wt% nano-Pt/Fe 2 O 3 , for CO oxidation at 350 °C. Density functional theory calculations reveal that Pt 1 –O 4 catalyzes CO oxidation through a non-classical Mars–van Krevelen mechanism. The adsorbed O 2 on Pt 1 atoms activates the coordination oxygen in the Pt 1 –O 4 configuration, and then a barrierless O 2 dissociation occurs on the Pt 1 –Fe 2 triangle to replenish the consumed coordination oxygen by the cooperative action of Pt 5d and Fe 3d electrons. This work provides a new fundamental understanding of oxidation catalysis on stable and active SACs, providing guidance for rationally designing future heterogeneous catalysts.more » « less
-
Atomic dispersion of metal catalysts on a substrate accounts for the increased atomic efficiency of single-atom catalysts (SACs) in various catalytic schemes compared to the nanoparticle counterparts. However, lacking neighboring metal sites has been shown to deteriorate the catalytic performance of SACs in a few industrially important reactions, such as dehalogenation, CO oxidation, and hydrogenation. Metal ensemble catalysts (M n ), an extended concept to SACs, have emerged as a promising alternative to overcome such limitation. Inspired by the fact that the performance of fully isolated SACs can be enhanced by tailoring their coordination environment (CE), we here evaluate whether the CE of M n can also be manipulated in order to enhance their catalytic activity. We synthesized a set of Pd ensembles (Pd n ) on doped graphene supports (Pd n /X-graphene where X = O, S, B, and N). We found that introducing S and N onto oxidized graphene modifies the first shell of Pd n converting Pd–O to Pd–S and Pd–N, respectively. We further found that the B dopant significantly affected the electronic structure of Pd n by serving as an electron donor in the second shell. We examined the performance of Pd n /X-graphene toward selective reductive catalysis, such as bromate reduction, brominated organic hydrogenation, and aqueous-phase CO 2 reduction. We observed that Pd n /N-graphene exhibited superior performance by lowering the activation energy of the rate-limiting step, i.e., H 2 dissociation into atomic hydrogen. The results collectively suggest controlling the CE of SACs in an ensemble configuration is a viable strategy to optimize and enhance their catalytic performance.more » « less
-
Abstract Fabrication of 3dmetal‐based core@shell nanocatalysts with engineered Pt‐surfaces provides an effective approach for improving the catalytic performance. The challenges in such preparation include shape control of the 3dmetallic cores and thickness control of the Pt‐based shells. Herein, we report a colloidal seed‐mediated method to prepare octahedral CuNi@Pt‐Cu core@shell nanocrystals using CuNi octahedral cores as the template. By precisely controlling the synthesis conditions including the deposition rate and diffusion rate of the shell‐formation through tuning the capping ligand, reaction temperature, and heating rate, uniform Pt‐based shells can be achieved with a thickness of <1 nm. The resultant carbon‐supported CuNi@Pt‐Cu core@shell nano‐octahedra showed superior activity in electrochemical methanol oxidation reaction (MOR) compared with the commercial Pt/C catalysts and carbon‐supported CuNi@Pt‐Cu nano‐polyhedron counterparts.more » « less
- Free Publicly Accessible Full Text
-
Accepted Manuscript1.0
- Journal Article:
- https://doi.org/10.1021/acsanm.4c03416
