An official website of the United States government
Side chain alkyl groups have become the standard for incorporating solubilizing groups into conjugated polymers. However, the variety of alkyl groups available and their location on the polymer’s backbone can contribute to the packing of the polymer chains in many different ways, resulting in many different morphologies in the polymer that can affect its properties and performances. In this paper, we investigate the effects on the conductivity of nine phenothiazine-containing polyaniline derivatives (P1−P9) with alkyl or aryl side chains on the phenothiazine core while also varying the number of methyl groups on the p-phenylenediamine unit. 1H nuclear magnetic resonance spectroscopy, ultraviolet−visible spectroscopy, differential scanning calorimetry, scanning electron microscopy, atomic force microscopy, and wide-angle X-ray scattering (WAXS) were all used to study the polymers’ structures, physical and thermal properties, and morphologies. The t-butylphenyl substituent on the phenothiazine core seems to provide more rigidity in the polymer’s backbone resulting in higher Tg for series 3, while series 2 containing the 2-hexyldecyl-substituted polymers had the lowest Tg, which is attributed to the large volume of the side chain, that limits interchain interactions. Consequently, series 2 had the lowest conductivity. However, the strongest effect on the conductivity was seen from the tetramethyl groups on the PPDA unit, which resulted in the lowest conductivity in each series due to torsional strain (twisting) in the polymer’s backbone. The WAXS data suggest mostly amorphous films; thus, the conductivity in these materials seems to be dominated by a multiscale charge transport phenomenon that occurs in amorphous conjugated materials. Our results will aid in the understanding of side chain engineering of PANI derivatives for their optimum performances.
more »
« less
This content will become publicly available on April 1, 2026
Cellulose-based poly(ionic liquid)s: Correlations between degree of substitution and alkyl side chain length with conductive and morphological properties
Ion transport in solid polymer electrolytes is crucial for applications like energy conversion and storage, as well as carbon dioxide capture. However, most of the materials studied in this area are petroleum-based. Natural materials (biopolymers) have the potential to act as alternatives to petroleum-based products and, when derived with ionic liquid (IL) functionalities, present a sustainable alternative for conductive materials by offering tunable morphological, thermal, and mechanical properties. In this study, a series of IL-functionalized cellulose derivatives with variations in pendant alkyl chain length, counteranions, and degrees of substitution were synthesized in order to explore structure-property relationships. Emphasis was placed on investigating morphological, thermal, and ionic conductivity changes, hypothesizing that materials synthesized with longer alkyl chains would exhibit increased backbone-to-backbone spacing, thereby lowering the glass transition temperature, and enhancing ionic conductivity. A variety of characterization techniques were used for this investigation, including nuclear magnetic resonance spectroscopy (NMR), elemental analysis, Fourier transform infrared spectroscopy (FTIR), thermogravimetric analysis (TGA), differential scanning calorimetry (DSC), X-ray scattering, and dielectric relaxation spectroscopy (DRS). The findings reveal a link between longer alkyl chain lengths, expanded backbone-backbone spacing, and side chain interdigitation. Within each set of samples, heightened ionic conductivity was observed with the introduction of bulkier, less coordinating anions, underscoring the significant influence of counteranion size.
more »
« less
- Award ID(s):
- 2104376
- PAR ID:
- 10599841
- Publisher / Repository:
- International Journal of Biological Macromolecules
- Date Published:
- Journal Name:
- International Journal of Biological Macromolecules
- Volume:
- 299
- Issue:
- C
- ISSN:
- 0141-8130
- Page Range / eLocation ID:
- 140065
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
Ionic liquids (ILs) are becoming important solvents in commerce, but monitoring their purity and performance in industrial applications presents new challenges. Fiber welding technology utilizes ILs to mold and shape natural fibers (cotton, hemp, flax, silk, and wool) into morphologies that are typically attained only using synthetic, petroleum-based non-biodegradable plastics. The result is an atom-efficient process that up-converts fibrous substrates to value-added products and materials. A key aspect of bringing this and other IL-enabled technologies to market relies on efficient monitoring and recycling of IL-based solvents. Implementing online IL quality monitoring enhances the unit economics of these processes. Here, we characterize and report conductivity measurements, refractometry, and ATR–FTIR spectroscopy techniques for online IL monitoring during an industrial fiber welding process. The online analysis enables more efficient recycling of the IL solvent, increasing the process efficiency and product quality.more » « less
-
Dual ionic liquid-substituted cellulosic materials were prepared by coupling a series of alkyne-terminated imidazoles with variable carbon spacer with azide-functionalized cellulose, followed by quaternization and anion exchange. All three of the [NTf2]-bearing cellulosic materials exhibited Tg values below zero and could be cast as flexible films, which exhibited stress at break values exceeding 2.3 MPa with strain at break values up to 252%. X-ray scattering analyses indicated the amorphous nature of the cellulosic materials with three scattering peaks observed, from high-to-low q, corresponding to the amorphous halo, anion-to-anion distance, and the distance between ion aggregates, respectively. The highest degree of ionic aggregation was found to exist in the CELL-C12-NTf2 material, presumably due to the longer alkyl tethers causing more uniformity in the interaggregate spacing. The conductivity of the films was found to be on the order of 10−5−10−6 S/cm at 30 °C. A slower increase in conductivity with temperature was observed for systems where ionic aggregation was the strongest.more » « less
-
This study revealed the effects of incorporating ionic liquid (IL) molecules: 1-ethyl, 1-butyl, and 1-octyl-3-methyl-imidazolium chlorides with different alkyl chain lengths, in interfacial polymerization (IP) on the structure and property (i.e., permeate-flux and salt rejection ratio) relationships of resulting RO membranes. The IL additive was added in the aqueous meta-phenylene diamine (MPD; 0.1% w/v) phase, which was subsequently reacted with trimesoyl chloride (TMC; 0.004% w/v) in the hexane phase to produce polyamide (PA) barrier layer. The structure of resulting free-standing PA thin films was characterized by grazing incidence wide-angle X-rays scattering (GIWAXS), which results were correlated with the performance of thin-film composite RO membranes having PA barrier layers prepared under the same IP conditions. Additionally, the membrane surface properties were characterized by zeta potential and water contact angle measurements. It was found that the membrane prepared by the longer chain IL molecule generally showed lower salt rejection ratio and higher permeation flux, possibly due to the inclusion of IL molecules in the PA scaffold. This hypothesis was supported by the GIWAXS results, where a self-assembled surfactant-like structure formed by IL with the longest aliphatic chain length was detected.more » « less
-
null (Ed.)Here we introduce the synthesis and thermal properties of a series of sophisticated imidazolium ionenes with alternating amide-amide or amide-imide backbone functionality, and investigate the structural effects of mono(imidazolium) and unprecedented tris(imidazolium) ionic liquids (ILs) in these ionenes. The new set of poly(amide-amide) (PAA) and poly(amide-imide) (PAI) ionenes represent the intersection of conventional high-performance polymers with the ionene archetype–presenting polymers with alternating functional and ionic elements precisely sequenced along the backbone. The effects of polymer composition on the thermal properties and morphology were analyzed. Five distinct polymer backbones were synthesized and combined with a stoichiometric equivalent of the IL 1-benzyl-3-methylimidazolium bistriflimide ([Bnmim][Tf2N]), which were studied to probe the self-assembly, structuring, and contributions of intermolecular forces when IL is added. Furthermore, three polyamide (PA) or polyimide (PI) ionenes with simpler xylyl linkages were interfaced with [Bnmim][Tf2N] as well as a novel amide-linked tris(imidazolium) IL, to demonstrate the structural changes imparted by the inclusion of functional, ionic additives dispersed within the ionene matrix. This work highlights the possibilities for utilizing concepts from small molecules which exhibit supramolecular self-assembly to guide creative design and manipulate the structuring of ionenes.more » « less
